Gravure-News

[enermax29]

Hello,
j'ai acheté des blurays vierges double couche, marque Mediarange.
J'ai un LG BE06LU10 (à jour), mais voilà Nero ne veut pas graver, il met directement l'erreur Disc at once dès le départ
Les simple couche passent nickel normalement mais là..

J'ai essayé avec ImgBurn : marche pas non plus
J'sais pas quoi faire.. help please


Le log Nero :

Windows 7 6.1
AMD64
Wow64Process
Nero Version: 12.0.20.0
Internal Version: 12,0,20,0

Recorder: <HL-DT-ST BD-RE BE06LU10>Version: YE05 - HA 1 TA 3 - 12.0.20.0
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <SJU KLAF0XM >Version: 1.04 - HA 1 TA 0 - 12.0.20.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HD204UI 1AQ1 Si3132r5 Port 6 ID 0 DMA: Off
DiskPeripheral : WDC WD20EARX-00PASB0 51.0 Si3132r5 Port 6 ID 0 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3132r5 Port 6 ID 31 DMA: Off
CdRomPeripheral : SJU KLAF0XM 1.04 akrm0dq1 Port 7 ID 0 DMA: Off

=== CDRom-Device-Map ===
SJU KLAF0XM P: CdRom0
HL-DT-ST BD-RE BE06LU10 I: CdRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 21 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.12.2013
Compilation UDF
14:27:55 #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:27:55 #2 Text 0 File Isodoc.cpp, Line 7610
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

14:27:55 #3 PHASE 214 File dlgbrnst.cpp, Line 2066
Generation of disc structures started

14:27:55 #4 Text 0 File compose.cpp, Line 969
GenUDF2: 1 transfer items prepared.

14:27:55 #5 PHASE 215 File dlgbrnst.cpp, Line 2066
Generation of disc structures completed

14:27:55 #6 Text 0 File Burncd.cpp, Line 3605
Turn on Disc-At-Once, using CD-R/RW; DVD R/RW; DVD DL; DVD-RAM; BD-R/RE; BD DL media

14:27:57 #7 Text 0 File DlgWaitCD.cpp, Line 334
[I: BD-RE BE06LU10 ] Total disc capacity: 24438784 47732MB
User data to be written: 22409472 43768MB
Free space on disc: 24438784 47732MB

14:27:57 #8 Text 0 File DlgWaitCD.cpp, Line 346
[I: BD-RE BE06LU10 ] Write in overburning mode: NO (enabled: CD)

14:27:57 #9 Text 0 File DlgWaitCD.cpp, Line 3034
Recorder: HL-DT-ST BD-RE BE06LU10, Media type: BD-R (seq)

14:27:57 #10 Text 0 File DlgWaitCD.cpp, Line 537
[I: BD-RE BE06LU10 ] >>> Protocol of DlgWaitCD activities: <<<
=========================================

14:27:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 878
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 22409472 (22409472) = #22409472/4979:52.72
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 22409472 blocks [I: HL-DT-ST BD-RE BE06LU10]
--------------------------------------------------------------

14:27:57 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1094
Prepare [I: HL-DT-ST BD-RE BE06LU10] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 45894598656, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 22409472 | 0 | 0x00
22409472 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: BD-R DL

14:27:57 #13 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

14:27:57 #14 Text 0 File Burncd.cpp, Line 4467
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

14:27:57 #15 PHASE 24 File dlgbrnst.cpp, Line 2066
Caching of files started

14:27:58 #16 Text 0 File Burncd.cpp, Line 4589
Cache writing successful.

14:27:58 #17 PHASE 25 File dlgbrnst.cpp, Line 2066
Caching of files completed

14:27:58 #18 PHASE 36 File dlgbrnst.cpp, Line 2066
Burn process started at 2x (8 990 Ko/s)

14:27:58 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2924
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:27:58 #20 Text 0 File Cdrdrv.cpp, Line 10675
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 10
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 34 (22 h):
2 recording layer (DL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
Recorded mark polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer rate needed by the application: 0 Mbit/s
Data zone allocation:
First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
Recording velocities:
Nominal Recording Velocity: 4.92 m/s (1EC h)
Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
...
22 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
00 19 4E 7E 01 EC 64 64 - 46 46 46 46 3C 3C 3C 3C
00 00 00 00 95 59 76 02 - 02 38 1C 64 90 F0 F0 F0
F0 F0 F0 F0 F0 00 00 00 - 00 48 00 48 00 48 00 48
00 48 00 48 00 48 00 48 - 00 48 00 48 00 48 00 48
00 70 70 BC D0 D0 00 00
--- Trailer ---
Disc Manufacturer ID: 43 4D 43 4D 41 47 h <CMCMAG>
Media Type ID: 44 49 36 <DI6>
Time Stamp [m:y]: 0 : 0000 (00 00 h)
Product Revision Number: 0

14:27:58 #21 Text 0 File BD.cpp, Line 414
Allocated spare area size on disc ca0000h
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0

14:27:58 #22 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

14:27:58 #23 Text 0 File CUDFTransferItem2.cpp, Line 712

GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 22409472
Session Start: Sector 0
Volume Structure: Sector [0, 256] (257 Sectors)
Meta Data: Sector [257, 361] (105 Sectors)
Data: Sector [362, 22409121] (22408760 Sectors)
After Data: Sector [22409122, 22409151] (30 Sectors)
Trailer Track: Sector [22409152, 22409471] (320 Sectors)

GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 12-13-2013 14:27:55
UDF Revision: 1.02
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 24438784
Multi Session Mode: None
Disc Type: BD-R DL
OS Class: 0
Volume ID: Nuovo
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 00000000
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 32
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 32
Make Writable: 0
Access Type: Read-only

14:27:59 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 224
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 37 2D 03 D4 0C
Buffer x10020080: Len x10000
0x01 00 02 00 AE 00 01 00 18 81 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 10 00 4E 00 75 00 6F 00
0x76 00 6F 00 00 00 00 00 00 00 00 00 00 00 00 00

14:27:59 #25 TRANSFER -20 File ThreadedTransfer.cpp, Line 1233
Could not perform Write

14:27:59 #26 CDR -1135 File Writer.cpp, Line 339
Write error
I: HL-DT-ST BD-RE BE06LU10

14:28:00 #27 SPTI -1135 File SCSIPassThrough.cpp, Line 224
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 37 2D 03 D4 0C

14:28:00 #28 SPTI -1046 File SCSIPassThrough.cpp, Line 224
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
Sense Area: 0x70 00 05 00 00 00 00 0A 5B 00 00 D4 30 05

14:28:00 #29 CDR -1135 File WriterStatus.cpp, Line 315
Write error
I: HL-DT-ST BD-RE BE06LU10

14:28:00 #30 TRANSFER -24 File ThreadedTransfer.cpp, Line 1233
Could not perform end of Disc-at-once

14:28:00 #31 Text 0 File DVDPlusDualLayer.cpp, Line 1462
SetDriveCaps: Set LAST LBA of layer 1 to 0

14:28:00 #32 PHASE 38 File dlgbrnst.cpp, Line 2066
Burn process failed at 2x (8 990 Ko/s)

14:28:00 #33 Text 0 File SCSIPTICommands.cpp, Line 301
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:28:00 #34 Text 0 File Cdrdrv.cpp, Line 12127
DriveLocker: UnLockVolume completed

14:28:00 #35 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

[Colok]

Peut-être qu'il faudrait que tu mettes à jour ta version de Nero!

Voir ici

[dsp56001]

Hello,
j'ai acheté des blurays vierges double couche, marque Mediarange.

Salut les jeunes,

Ce problème n'en est pas un.
Mediarange ce sont des médias de très mauvaise qualité au niveau DVD et encore plus au niveau BLURAY.
Ce n'est pas cher mais il n'est pas étonnant que parfois au moins la moitié des BD-R soient ingravable.

Donc si tu connais des gens qui arrivent à graver en entier sur ce type de BD-R DL tant mieux.
Moi personnellement je ne serais pas étonné d'apprendre qu'ils vendent des séries ayant échoués aux tests de certifications voire des rebuts de fabrication.

Néanmoins tu peux toujours essayer de nettoyer la lentille du lecteur pour voir si le résultat est différent, on ne sait jamais.
Le mieux est d'acheter de vrais médias comme conseillés ici:
scans-de-medias-vf33.htm

Bonne nuit Europe.