Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.
En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:Program fileAheadNero, il se nomne NeroHistoryLog . On peut le visualier avec un éditeur de texte , bloc note de windows par exemple.
Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log.
tu peux le coller entre les balise [ code ] et [ /code ].
droop Nouveau Membre
Inscrit le: 03 Déc 2007 Messages: 5
Posté le: 04 Déc 2007 12:52 Sujet du message:
Woilà pour le dernier test ce jour:
Code:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
Version de Nero : 6.3.1.17
Graveur : <PIONEER DVD-RW DVR-111D>Version: 1.29 - HA 0 TA 0 - 6.3.1.17
Pilote d'adaptateur :<atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM : <PIONEER DVD-RW DVR-111D>Version: 1.29 - HA 0 TA 0 - 6.3.1.17
Pilote d'adaptateur :<atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-111D atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6G160E0 KA10 viamraid Port 2 ID 0 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047792kB)
Free physical memory: 538MB (551604kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.12.2007
Compilation UDF/ISO
12:38:06 #1 Phase 112 File dlgbrnst.cpp, Line 1845
Réallocation des fichiers DVD-Vidéo commencée
12:38:07 #2 Phase 114 File dlgbrnst.cpp, Line 1845
Réallocation des fichiers DVD-Vidéo achevée (aucun fichier modifié)
12:38:07 #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:38:07 #4 Phase 111 File dlgbrnst.cpp, Line 1845
Classement des fichiers DVD-Vidéo
12:38:08 #5 Text 0 File Reader.cpp, Line 118
Reader running
12:38:08 #6 Text 0 File Writer.cpp, Line 124
Writer PIONEER DVD-RW DVR-111D running
12:38:08 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:38:08 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:38:08 #9 Text 0 File Burncd.cpp, Line 3172
Turn on Disque entier, using DVD media
12:38:08 #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1709423 (379:52.23, 3338MB)
12:38:08 #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
12:38:09 #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD-R
Disc Manufacturer: INFOME - DIAR30
Disc Application Code: 64, Disc Physical Code: 193
12:38:09 #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:38:09 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1709424 (1709424) = #1709424/379:52.24
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1709424 blocks [PIONEER DVD-RW DVR-111D]
--------------------------------------------------------------
12:38:09 #16 Phase 24 File dlgbrnst.cpp, Line 1845
Début de mise en cache des fichiers
12:38:09 #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
12:38:09 #18 Phase 25 File dlgbrnst.cpp, Line 1845
Cache des fichiers terminé
12:38:09 #19 Phase 32 File dlgbrnst.cpp, Line 1845
Début de simulation à 4x (5 540 Ko/s)
12:38:09 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:38:09 #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 10:42,083 (642083ms) -> OK
12:38:09 #22 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode
12:38:09 #23 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON
12:38:09 #24 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes
12:38:09 #25 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:38:13 #26 Text 0 File Cdrdrv.cpp, Line 1294
12:38:13.390 - PIONEER DVD-RW DVR-111D\H0 T0 : Queue again later
12:39:23 #27 Text 0 File Cdrdrv.cpp, Line 1294
12:39:23.531 - PIONEER DVD-RW DVR-111D\H0 T0 : Queue again later
12:42:51 #28 Text 0 File Cdrdrv.cpp, Line 1294
12:42:51.109 - PIONEER DVD-RW DVR-111D\H0 T0 : Queue again later
12:49:28 #29 Text 0 File WriterStatus.cpp, Line 115
<PIONEER DVD-RW DVR-111D> start writing Lead-Out at LBA 1709424 (1A1570h), lenght 0 blocks
12:49:29 #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:49:29 #31 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was 1709423
12:49:31 #32 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
12:49:31 #33 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
12:49:38 #34 Phase 33 File dlgbrnst.cpp, Line 1845
Simulation terminée avec succès à 4x (5 540 Ko/s)
12:49:39 #35 Phase 36 File dlgbrnst.cpp, Line 1845
Début de gravure à 4x (5 540 Ko/s)
12:49:40 #36 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:49:40 #37 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 10:42,083 (642083ms) -> OK
12:49:40 #38 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode
12:49:40 #39 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON
12:49:40 #40 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes
12:49:40 #41 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:49:43 #42 Text 0 File Cdrdrv.cpp, Line 1294
12:49:43.281 - PIONEER DVD-RW DVR-111D\H0 T0 : Queue again later
12:50:16 #43 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x042D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00
12:50:16 #44 CDR -1135 File Writer.cpp, Line 304
Erreur écriture
12:50:16 #45 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:50:16 #46 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
12:50:16 #47 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was 767
12:50:16 #48 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
12:50:16 #49 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
12:50:16 #50 Phase 38 File dlgbrnst.cpp, Line 1845
La gravure a échoué à 4x (5 540 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 22:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 08/03/2007 00:51:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 05/08/2004 13:00:00 (Adapter driver for rec)
Vous ne pouvez pas poster de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets dans ce forum Vous ne pouvez pas éditer vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum Vous pouvez joindre des fichiers Vous pouvez télécharger des fichiers
FAQ
Règlements
Rechercher
Téléchargement
S'enregistrer
Profil
Se connecter pour vérifier ses messages privés
Connexion
Carte des membres
