superzero
Nouveau Membre
Inscrit le: 09 Mar 2008
Messages: 3
|
 Posté le: 09 Mar 2008 12:29 Sujet du message: Erreur gravure DMA et CRC sous Vista [Résolu] |
 |
Bonjour à vous tous
J'ai un problème assez embêtant, je suis sous Windows Vista
Mon graveur : LG GSA-H55N
J'utilise la dernière version de Nero 7, mes DVD+RW sont neufs
Durant la gravure de données, j'ai un message d'erreur DMA, CRC
La nappe est une 40 fils, pourtant cette même nappe fonctionne en gravant sous Windows XP (un autre PC donc)
Pour que la gravure se passe bien, il faut qu'à chaque fois je réinstalle le firmware 1.05 (ou antérieur) après redémarrage, l'erreur ne survient pas.
Lorsque je redémarre ou bien j'éteins mon ordi, puis je le rallume, l'erreur recommence à apparaître durant la gravure, donc c'est stressant.
J'ai beau cherché sur le net, mais je ne sais pas si c'est un problème de DMA qui est désactivé.
Voici le log :
| Code:
|
-****
Windows XP 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.05 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.05 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N G: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095616kB)
Free physical memory: 1326MB (1358564kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.3.2008
Compilation ISO
12:11:30 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:11:30 #2 Text 0 File Isodoc.cpp, Line 6666
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:11:30 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
12:11:31 #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
12:11:31 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1431743 (318:09.68, 2796MB)
12:11:31 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
12:11:31 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
12:11:31 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:11:31 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1431744 (1431744) = #1431744/318:9.69
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1431744 blocks [G: HL-DT-ST DVD-RAM GSA-H55N]
--------------------------------------------------------------
12:11:31 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2932211712, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1431744 | 0 | 0x00
1431744 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:11:31 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
12:11:31 #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
12:11:31 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
12:11:31 #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
12:11:31 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
12:11:31 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5 540 Ko/s)
12:11:31 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:11:31 #18 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............
12:11:31 #19 Text 0 File DVDR.cpp, Line 6553
Drive: HL-DT-ST DVD-RAM GSA-H55N
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type
12:11:31 #20 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
12:11:31 #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
12:11:54 #22 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 08 03
Buffer x190a0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
12:11:54 #23 CDR -1502 File Writer.cpp, Line 303
DMA-driver error, CRC error
G: HL-DT-ST DVD-RAM GSA-H55N
12:11:57 #24 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0
12:11:57 #25 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5 540 Ko/s)
12:11:57 #26 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:12:04 #27 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
12:12:04 #28 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
|
En vous remerciant de votre contribution  |
FAQ
Règlements
Rechercher
Téléchargement
S'enregistrer
Profil
Se connecter pour vérifier ses messages privés
Connexion
Carte des membres
