[joj]

Bonjour, Je remercie par avance ceux qui m'aideront à résoudre ce probléme, Je grave des CD et DVD avec le graveur philipps SPD2411P et nero 7 essential. J'ai acquis ce graveur il y a environ 7 mois avec le logiciel fournis. Je grave sur tous types de formats notament DVD+R (je gravais avec ceux la jusqu'a maintenant) mais depuis quelques jours nero me donne l'erreur suivante "eureur compatibilité" ??????? je suis donc allée faire un tour dans nero info tool (comme on me l'a conseillé) et la, la case DVD+R n'était plus coché! (impossible de le faire manuellement je présume). Alors j'ai graver sur d'autres formats (case bien cochée) et la erreur suivante 'erreur de puissance calibarge" puis queqlues fois la gravure se lance mais la erreur suivante "erreur d'écriture". J'ai suivi pas mal de conseil trouvé sur les forums mais rien n'y fait alors je m'en remets à vous en éspérant que vous m'aidiez. Petite info : J'ai acheté ce graveur car le précédent m'avait aussi laché au bout de 6 mois. Peut-être mon PC me fusille les graveur (virus), je ne sais... autre info : je grave trés bien sur les CD... J'en peux plus je suis maudite avec les graveurs, c'est pas possible !!! Merci pour tous les conseils et aide que vous pourrez me donner, je vous en serais trés reconnaissante.Configuration: Windows XP

[Scaramanga]

Salut et bienvenue sur le forum de Gravure-News,

[Scaramanga]

Salut et bienvenue sur le forum de Gravure-News,

[joj]

J'ai effectivement effectuer les mise a jour avec le Philips intelligent agent et j'ai refait une tentative : gravure arrivé à 100% mais echoue en disant erreur fixation cession puis erreur impossible d'effectuer la fonction disc at one
voici le log

[joj]

Boomscud
Boomscud
4C89-200C-2005-477K-055X-4025-1E1M-6X37*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.3.3
Internal Version: 7, 2, 3, 3
(Nero Express)
Recorder: <PHILIPS SPD2411P> Version: BP01 - HA 1 TA 1 - 7.2.3.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0017 - HA 1 TA 0 - 7.2.3.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800LB-07DNA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS SPD2411P atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B D: CDRom0
PHILIPS SPD2411P E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 52MB (53820kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.5.2008
Compilation ISO
20:08:57 #1 Text 0 File Isodoc.cpp, Line 6427
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:08:57 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory

20:08:57 #3 Text 0 File Reader.cpp, Line 124
Reader running

20:08:57 #4 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS SPD2411P running

20:08:57 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

20:08:57 #6 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media

20:09:29 #7 Text 0 File DlgWaitCD.cpp, Line 290
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2022671 (449:28.71, 3950MB)

20:09:29 #8 Text 0 File DlgWaitCD.cpp, Line 302
Write in overburning mode: NO (enabled: CD)

20:09:29 #9 Text 0 File DlgWaitCD.cpp, Line 2733
Recorder: PHILIPS SPD2411P, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

20:09:29 #10 Text 0 File DlgWaitCD.cpp, Line 474
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: DVD-R. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)

20:09:29 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2022672 (2022672) = #2022672/449:28.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2022672 blocks [E: PHILIPS SPD2411P]
--------------------------------------------------------------

20:09:29 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PHILIPS SPD2411P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4142432256, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2022672 | lead-out | 1 | 0x41 | 0x00

20:09:29 #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

20:09:29 #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

20:09:29 #15 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.

20:09:29 #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

20:09:29 #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11 080 Ko/s)

20:09:30 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:09:30 #19 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

20:09:30 #20 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes

20:19:19 #21 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS SPD2411P> start writing Lead-Out at LBA 2022672 (1EDD10h), length 0 blocks

20:19:20 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:20:38 #23 SPTI -1176 File SCSIPassThrough.cpp, Line 291
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 04

20:20:38 #24 SPTI -1176 File SCSIPassThrough.cpp, Line 291
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

20:20:38 #25 CDR -1176 File ThreadedTransferInterface.cpp, Line 1937
Session fixation error
E: PHILIPS SPD2411P

20:20:38 #26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once

20:21:48 #27 SPTI -1176 File SCSIPassThrough.cpp, Line 291
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 04

20:21:48 #28 SPTI -1176 File SCSIPassThrough.cpp, Line 291
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

20:21:48 #29 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders

20:21:48 #30 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
E: PHILIPS SPD2411P

20:21:48 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

20:21:48 #32 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11 080 Ko/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 03/05/2008 22:39:22
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 03/05/2008 22:39:22 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)