Prob Gravure BDR Verbatim LTH avec liteon 112-37 ???

Forum de support des graveurs et périphériques Lite-On.

Prob Gravure BDR Verbatim LTH avec liteon 112-37 ???

Messagepar Lancelot74000 » 24 Jan 2011 10:46

Bonjour à tous
Je n'arrive pas à graver les BDR Verbatim LTH avec un liteon 112-37 ??? :(
Idem que ce soit avec nero 8 ou DvdFab 8.
J'y arrive poutant trés bien avec mon Plextor PX-B920 SA !
Plusieurs essais avec d'autre Verbatim et aucun problème !
Le Liteon ne supporte pas les LTH ?
Merci d'avance pour votre aide.




Congig:
:( ASUS P7P55D / CORE I5 760 / 8Go de KINGSTON HYPER X DDR3 KHX1600C9AD3K2) /Seasonic S12 Energy+ 550W / GE FORCE 9500GT / WD VELOCIRAPTOR 300GO / LITEON IHBS 112-37/ Néro 8 / DvdFab 8
Lancelot74000
Nouveau Membre
 
Messages: 4
Enregistré le: 24 Jan 2011

Re: Prob Gravure BDR Verbatim LTH avec liteon 112-37 ???

Messagepar Scaramanga » 24 Jan 2011 19:48

Hello,
Dernier firmware?
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14146
Enregistré le: 05 Sep 2002

Re: Prob Gravure BDR Verbatim LTH avec liteon 112-37 ???

Messagepar Lancelot74000 » 26 Jan 2011 18:26

Bonjour
Oui j'ai bien le dernier firmware....
Je n'ose plus faire d'éssais de gravure de Verba LTH avec ce Liteon, car j'en ai bousillé déja quatre ! :cry:

J'ai un rapport d'érreur mais pour moi C du Chinois :?



Windows Vista 6.0
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 8.3.6.0
Internal Version: 8, 3, 6, 0

Recorder: <ATAPI iHBS112 2> Version: CL0J - HA 1 TA 0 - 8.3.6.0
Adapter driver: <Serial ATA> HA 1
Drive buffer : 8192kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <ELBY CLONEDRIVE >Version: 1.4 - HA 1 TA 1 - 8.3.6.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
: WDC WD5000AAKS-65A7B 01.0 nvstor64 Port 2 ID 0 DMA: Off
: SAMSUNG HD103UJ 1AA0 nvstor64 Port 2 ID 1 DMA: Off
: ATAPI iHBS112 2 CL0J nvstor64 Port 3 ID 0 DMA: Off
CdRomPeripheral : ELBY CLONEDRIVE 1.4 VClone Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
ATAPI iHBS112 2 F: CdRom0
ELBY CLONEDRIVE G: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4093MB (4191820kB)
Free physical memory: 2426MB (2484372kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.1.2011
Compilation UDF
13:51:35 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

13:51:35 #2 Text 0 File Isodoc.cpp, Line 6713
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : manual
UDF Revision : 2.50
UDF Partition Type : physical

13:51:35 #3 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:51:37 #4 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:51:37 #5 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:51:37 #6 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:51:37 #7 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:51:37 #8 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:51:37 #9 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using Blu-ray Disc media

13:51:38 #10 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:51:38 #11 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:51:38 #12 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:51:38 #13 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:51:38 #14 SPTI -1195 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x060f9d00: Len x20

13:52:10 #15 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorBD'
ParamMode = 'manual', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '2.50' to '2.50'

13:52:10 #16 Text 0 File DlgWaitCD.cpp, Line 1858
Vous gravez un disque en version UDF 2.5 ou ultérieure.
Le disque ne sera peut-être pas accessible sur tous les systèmes d'exploitation.

13:52:12 #17 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 11937855 (2652:51.30, 23316MB)
Last address to be written: 11937855 (2652:51.30, 23316MB)

13:52:12 #18 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

13:52:12 #19 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: ATAPI iHBS112 2, Media type: BD-R (seq)

13:52:12 #20 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Inconnu. Medium required by compilation: BD-R/RE; BD DL.)

13:52:12 #21 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 11937856 (11937856) = #11937856/2652:51.31
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11937856 blocks [F: ATAPI iHBS112 2]
--------------------------------------------------------------

13:52:12 #22 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [F: ATAPI iHBS112 2] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 24448729088, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 11937856 | 0 | 0x00
11937856 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

13:52:12 #23 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

13:52:12 #24 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

13:52:12 #25 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

13:52:12 #26 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

13:52:12 #27 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

13:52:12 #28 Phase 28 File dlgbrnst.cpp, Line 1767
Speed measurement started

13:52:12 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:52:12 #30 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400

13:52:12 #31 Text 0 File CUDFTransferItem2.cpp, Line 672

GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 11937856
Session Start: Sector 0
Volume Structure: Sector [0, 287] (288 Sectors)
Before Meta Data: Sector [288, 319] (32 Sectors)
Meta Data: Sector [320, 511] (192 Sectors)
Data: Sector [512, 11937311] (11936800 Sectors)
After Data: Sector [11937312, 11937535] (224 Sectors)
Trailer Track: Sector [11937536, 11937855] (320 Sectors)

GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 01-23-2011 13:52:10
UDF Revision: 2.50
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 11826176
Multi Session Mode: None
Disc Type: BD-R
OS Class: 5
Volume ID:
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 00000000
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 32
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 32
Make Writable: 0
Access Type: Read-only

13:56:13 #32 Text 0 File WriterStatus.cpp, Line 245
<F: ATAPI iHBS112 2> start writing Lead-Out at LBA 11937856 (B62840h), length 0 blocks

13:56:13 #33 Phase 29 File dlgbrnst.cpp, Line 1716
Speed measurement completed: 22x (98 964 Ko/s)

13:56:13 #34 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2x (8 990 Ko/s)

13:56:13 #35 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:56:13 #36 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 2
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 18 (12 h):
1 recording layer (SL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 01 h
Recorded mark polarity flag bits: 01 h
BCA descriptor: BCA-code present (1)
Maximum transfer rate needed by the application: 0 Mbit/s
Data zone allocation:
First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
Recording velocities:
Nominal Recording Velocity: 4.92 m/s (1EC h)
Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
...
12 01 01 01 01 00 00 00 - 00 00 00 00 00 02 00 00
00 19 4E 7E 01 EC 64 64 - 28 28 28 28 1E 1E 1E 1E
00 00 00 00 48 46 7C 04 - 04 2E 1D 78 C0 08 08 08
08 00 00 00 00 00 00 00 - 00 68 00 68 00 68 00 68
00 60 00 60 00 60 00 60 - 00 60 00 60 00 60 00 60
00 80 90 A0 A0 A0 00 00
--- Trailer ---
Disc Manufacturer ID: 56 45 52 42 41 54 h <VERBAT>
Media Type ID: 49 4D 77 <IMw>
Time Stamp [m:y]: 0 : 0000 (00 00 h)
Product Revision Number: 0

13:56:34 #37 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0x53 00 00 00 00 00 B6 28 40 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24

13:56:34 #38 Text 0 File BD.cpp, Line 520
Format BD-R with Format Type 32h, sub-type 1, spare area size 281536 -> return code 0
Allocated spare area size on disc 393216
Reserved Track size: 11937856 sect (B62840h, 23316MB) -> return code -1066
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: allocation (1), Stream recording: NO (0); return code -1066

13:56:34 #39 CDR -1066 File ThreadedTransferInterface.cpp, Line 1680
Invalid field in command
F: ATAPI iHBS112 2

13:56:34 #40 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1680
Could not perform start of Disc-at-once

13:56:34 #41 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

13:56:34 #42 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2x (8 990 Ko/s)

13:56:34 #43 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:56:34 #44 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed

13:56:34 #45 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
Lancelot74000
Nouveau Membre
 
Messages: 4
Enregistré le: 24 Jan 2011

Re: Prob Gravure BDR Verbatim LTH avec liteon 112-37 ???

Messagepar Scaramanga » 27 Jan 2011 5:48

Code: Tout sélectionner
: WDC WD5000AAKS-65A7B 01.0 nvstor64 Port 2 ID 0 DMA: Off
: SAMSUNG HD103UJ 1AA0 nvstor64 Port 2 ID 1 DMA: Off
: ATAPI iHBS112 2 CL0J nvstor64 Port 3 ID 0 DMA: Off
CdRomPeripheral : ELBY CLONEDRIVE 1.4 VClone Port 5 ID 0 DMA: Off


Le mode DMA est désactivé (off) pour tous tes périphériques.
http://www.gravure-news.com/tutoriel/ac ... ma-3-1.php

Mode HS on
Je veins de ma dire que ce tuto a déjà 7 ans....et peut être plus adapté aux derniers OS et étant sous Linux depuis...
MOde HS Off

Possible que le lecteur virtuel te sème la zone, essayé aussi en le désactivant.
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14146
Enregistré le: 05 Sep 2002

Re: Prob Gravure BDR Verbatim LTH avec liteon 112-37 ???

Messagepar Lancelot74000 » 27 Jan 2011 10:06

Merci pour cette piste.
Donc j'active le DMA de ces trois périphériques et je désactive le lecteur virtuel.
Je n'y connais rien, mais pourquoi prob juste avec les Verba LTH ?
Et pourquoi avec mon graveur Plextor sur le même ordi, il n'y a aucun problème ?
Merci
Lancelot74000
Nouveau Membre
 
Messages: 4
Enregistré le: 24 Jan 2011

Re: Prob Gravure BDR Verbatim LTH avec liteon 112-37 ???

Messagepar franz99 » 29 Jan 2011 7:08

Lancelot74000 a écrit:

Le Liteon ne supporte pas les LTH ?
Lancelot74000 a écrit:
. . . , mais pourquoi prob juste avec les Verba LTH ?
Et pourquoi avec mon graveur Plextor sur le même ordi, il n'y a aucun problème ?

LTH = low to high : les BD-R à dye organique, moins chers mais plus rares
HTL = high to low : les premiers BD-R (classiques)
Pas de mail ni de MP , merci !
Avatar de l’utilisateur
franz99
Retraité de GN
Inconditionnel
 
Messages: 5886
Enregistré le: 08 Nov 2004

Re: Prob Gravure BDR Verbatim LTH avec liteon 112-37 ???

Messagepar franz99 » 18 Fév 2011 13:40

Comme "Lancelot74000" ne se manifeste plus
je dois admettre que ce problème avec son graveur LiteOn iHBS112 et les BD-R Verbatim de type LTH (low to high)
est résolu
Aussi je n’insiste pas …
Pas de mail ni de MP , merci !
Avatar de l’utilisateur
franz99
Retraité de GN
Inconditionnel
 
Messages: 5886
Enregistré le: 08 Nov 2004

Re: Prob Gravure BDR Verbatim LTH avec liteon 112-37 ???

Messagepar Lancelot74000 » 23 Fév 2011 13:41

Bonjour
A vrai dire je n'ai plus de Bdr pour faire de nouveaux essais...
J'attend d'en recevoir d'autre pour savoir si cela va mieux maintenant.
Merci
Lancelot74000
Nouveau Membre
 
Messages: 4
Enregistré le: 24 Jan 2011



  • Publicité

Retourner vers Graveurs Lite-On

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 1 invité

cron