probleme de gravure avec nero 6

Problèmes de fonctionnement, tests, conseils d'achat... Posez votre question ici (Nec, Sony, Teac, Traxdata...).

probleme de gravure avec nero 6

Messagepar PATLAMENACE » 21 Mai 2006 18:43

bonjour a vous!

je vous explique mon probleme : je viens de faire changer mon graveur et depuis je ne peux plus graver de DVD par contre les cd marchent!
il est ecrit que la fonction disc at once n'a pas pu etre effectué!
voila j'espere que quelqu'un pourra aider la neophite que je suis !
mon nouveau graveur est un hl-dt-st dvdram gsa-4082m
merci beaucoup a l'avance
pat
PATLAMENACE
Nouveau Membre
 
Messages: 7
Enregistré le: 21 Mai 2006

Messagepar Scaramanga » 21 Mai 2006 19:03

Salut,
Peux tu nous coller le fichier log de nero ?

Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.

En ce qui concerne Nero 6 tu le trouveras dans le répertoire d'installation, C:\Program Files\Ahead\Nero, il se nomne NeroHistoryLog . On peut le visualier avec un éditeur de texte , bloc note de windows par exemple.

Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log.
tu peux le coller entre les balise [ code ] et [ /code ].
Modifié en dernier par Scaramanga le 21 Mai 2006 19:14, modifié 1 fois.
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14146
Enregistré le: 05 Sep 2002

Messagepar PATLAMENACE » 21 Mai 2006 19:10

je suis desolée je ne trouve pas!
PATLAMENACE
Nouveau Membre
 
Messages: 7
Enregistré le: 21 Mai 2006

Messagepar PATLAMENACE » 21 Mai 2006 19:14

ca y est

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 364MB (373228kB)
Memory in use : 64
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2006
Compilation UDF/ISO
13:39:51 #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

13:39:51 #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

13:39:51 #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

13:39:51 #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

13:39:51 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

13:39:51 #6 Text 0 File Reader.cpp, Line 124
Reader running

13:39:51 #7 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4082N running

13:39:51 #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

13:39:51 #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

13:39:51 #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

13:39:51 #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2029727 (451:03.02, 3964MB)

13:39:51 #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

13:39:51 #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4082N, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

13:39:51 #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:39:51 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2029728 (2029728) = #2029728/451:3.3
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2029728 blocks [HL-DT-ST DVDRAM GSA-4082N]
--------------------------------------------------------------

13:39:51 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4156882944, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2029728 | lead-out | 1 | 0x41 | 0x00

13:39:51 #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

13:39:51 #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:39:51 #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

13:39:51 #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

13:39:51 #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

13:39:51 #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11 080 Ko/s)

13:39:51 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:39:52 #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

13:39:52 #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

13:39:52 #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

13:40:21 #27 SPTI -1135 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x07040000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

13:40:21 #28 CDR -1135 File Writer.cpp, Line 311
Write error
D: HL-DT-ST DVDRAM GSA-4082N

13:40:21 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:40:21 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

13:40:21 #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1

13:40:21 #32 CDR -1135 File WriterStatus.cpp, Line 167
Write error
D: HL-DT-ST DVDRAM GSA-4082N

13:40:21 #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

13:40:21 #34 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 8x (11 080 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 16/07/2004 14:53:14 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 16/07/2004 14:53:54 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 16/07/2004 14:57:12 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
zammit patricia

1A22-020C-0K30-1726-8320-8652*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 366MB (375204kB)
Memory in use : 64
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2006
Compilation UDF/ISO
13:49:42 #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

13:49:42 #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

13:49:42 #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

13:49:42 #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

13:49:42 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

13:49:42 #6 Text 0 File Reader.cpp, Line 124
Reader running

13:49:42 #7 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4082N running

13:49:42 #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

13:49:42 #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

13:49:42 #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

13:49:43 #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2029727 (451:03.02, 3964MB)

13:49:43 #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

13:49:43 #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4082N, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

13:49:43 #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:49:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2029728 (2029728) = #2029728/451:3.3
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2029728 blocks [HL-DT-ST DVDRAM GSA-4082N]
--------------------------------------------------------------

13:49:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4156882944, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2029728 | lead-out | 1 | 0x41 | 0x00

13:49:43 #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

13:49:43 #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:49:43 #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

13:49:43 #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

13:49:43 #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

13:49:43 #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11 080 Ko/s)

13:49:43 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:49:43 #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

13:49:43 #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

13:49:43 #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

13:50:15 #27 SPTI -1135 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x07040000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

13:50:15 #28 CDR -1135 File Writer.cpp, Line 311
Write error
D: HL-DT-ST DVDRAM GSA-4082N

13:50:15 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:50:15 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

13:50:15 #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1

13:50:15 #32 CDR -1135 File WriterStatus.cpp, Line 167
Write error
D: HL-DT-ST DVDRAM GSA-4082N

13:50:15 #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

13:50:15 #34 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 8x (11 080 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 16/07/2004 14:53:14 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 16/07/2004 14:53:54 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 16/07/2004 14:57:12 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
zammit patricia

1A22-020C-0K30-1726-8320-8652*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 540MB (553568kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2006
Compilation UDF/ISO
14:21:00 #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

14:21:00 #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

14:21:00 #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

14:21:00 #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

14:21:00 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

14:21:00 #6 Text 0 File Reader.cpp, Line 124
Reader running

14:21:00 #7 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4082N running

14:21:00 #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

14:21:00 #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

14:21:00 #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

14:21:01 #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2029727 (451:03.02, 3964MB)

14:21:01 #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

14:21:01 #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4082N, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

14:21:01 #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:21:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2029728 (2029728) = #2029728/451:3.3
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2029728 blocks [HL-DT-ST DVDRAM GSA-4082N]
--------------------------------------------------------------

14:21:01 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4156882944, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2029728 | lead-out | 1 | 0x41 | 0x00

14:21:01 #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

14:21:01 #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:21:01 #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

14:21:01 #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

14:21:01 #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

14:21:01 #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5 540 Ko/s)

14:21:01 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:21:01 #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

14:21:01 #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

14:21:01 #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14:21:36 #27 SPTI -1135 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x0c690000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

14:21:36 #28 CDR -1135 File Writer.cpp, Line 311
Write error
D: HL-DT-ST DVDRAM GSA-4082N

14:21:36 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14:21:36 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

14:21:36 #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1

14:21:37 #32 CDR -1135 File WriterStatus.cpp, Line 167
Write error
D: HL-DT-ST DVDRAM GSA-4082N

14:21:37 #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

14:21:37 #34 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5 540 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 16/07/2004 14:53:14 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 16/07/2004 14:53:54 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 16/07/2004 14:57:12 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
zammit patricia

1A22-020C-0K30-1726-8320-8652*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 523MB (535680kB)
Memory in use : 48
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2006
CD Audio
15:03:57 #1 CDADOC -1 File Cdadoc.cpp, Line 1456
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 04:24.15, Pause frames: 150, Filters: 0, Name: '04 Piste 4.wma'.
Track 02: Length: 03:57.21, Pause frames: 150, Filters: 0, Name: '02 Piste 2.wma'.
Track 03: Length: 03:35.03, Pause frames: 150, Filters: 0, Name: '02 Piste 2.wma'.
Track 04: Length: 04:20.24, Pause frames: 150, Filters: 0, Name: '15 Goodbye My Lover (album Version).wma'.
Total size: 16:24.63

15:03:57 #2 Text 0 File Burncd.cpp, Line 3012
HL-DT-ST DVDRAM GSA-4082N
Protection contre les ruptures activés

15:03:57 #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

15:03:57 #4 Text 0 File Reader.cpp, Line 124
Reader running

15:03:57 #5 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4082N running

15:03:57 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

15:03:57 #7 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using CD-R/RW media

15:03:57 #8 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 73712 ( 16:24.62)

15:03:57 #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

15:03:57 #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4082N

15:03:57 #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:03:57 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (04 Piste 4.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 19815 (19815) = #19815/4:24.15
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19815 blocks [HL-DT-ST DVDRAM GSA-4082N]
1: TRM_AUDIO_NOPRE (02 Piste 2.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 17796 (17796) = #17796/3:57.21
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17796 blocks [HL-DT-ST DVDRAM GSA-4082N]
2: TRM_AUDIO_NOPRE (02 Piste 2.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 16128 (16128) = #16128/3:35.3
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16128 blocks [HL-DT-ST DVDRAM GSA-4082N]
3: TRM_AUDIO_NOPRE (15 Goodbye My Lover (album Version).wma)
2 indices, index0 (150) not provided
original disc pos #0 + 19524 (19524) = #19524/4:20.24
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19524 blocks [HL-DT-ST DVDRAM GSA-4082N]
--------------------------------------------------------------

15:03:57 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 4:
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 46957680, ISRC ""
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 46957680 47310480 89166672, ISRC ""
3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 89166672 89519472 127452528, ISRC ""
4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 127452528 127805328 173725776, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
19815 | 2 | 0 | 0x21 | 0x00
19965 | 2 | 1 | 0x21 | 0x00
37761 | 3 | 0 | 0x21 | 0x00
37911 | 3 | 1 | 0x21 | 0x00
54039 | 4 | 0 | 0x21 | 0x00
54189 | 4 | 1 | 0x21 | 0x00
73713 | lead-out | 1 | 0x01 | 0x00

15:04:17 #14 Text 0 File SCSIPassThrough.cpp, Line 60
Error on LockVolume: Accès refusé.

15:04:17 #15 Text 0 File SCSIPassThrough.cpp, Line 106
SPTI - Error on DismountVolue: Accès refusé.

15:04:27 #16 Text 0 File SCSIPassThrough.cpp, Line 60
Error on LockVolume: Accès refusé.

15:04:27 #17 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 10x (1 500 Ko/s)

15:04:27 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

15:04:27 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #19965

15:04:27 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #37911

15:04:27 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #54189

15:04:28 #22 Text 0 File Mmc.cpp, Line 17161
StartDAO : CD-Text - On

15:04:28 #23 Text 0 File Mmc.cpp, Line 21840
Set BUFE: Buffer underrun protection -> ON

15:04:28 #24 Text 0 File Mmc.cpp, Line 17394
CueData, Len=80
21 00 00 41 00 00 00 00
21 01 00 00 00 00 00 00
21 01 01 00 00 00 02 00
21 02 00 00 00 04 1a 0f
21 02 01 00 00 04 1c 0f
21 03 00 00 00 08 19 24
21 03 01 00 00 08 1b 24
21 04 00 00 00 0c 02 27
21 04 01 00 00 0c 04 27
01 aa 01 01 00 10 18 3f

15:06:31 #25 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4082N> start writing Lead-Out at LBA 73713 (11FF1h), lenght 0 blocks

15:06:31 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:06:41 #27 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 10x (1 500 Ko/s)

15:06:42 #28 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

15:06:42 #29 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 16/07/2004 14:53:14 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 16/07/2004 14:53:54 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 16/07/2004 14:57:12 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
zammit patricia

1A21-0009-0030-2260-2187-1693
1A21-0009-0030-2446-9024-8905
1A21-0009-1030-2241-9230-9104
1A21-0009-1030-2332-3193-6877
1A21-0009-1030-2412-7812-6301
1A21-0009-2030-2278-6806-9801
1A21-0009-2030-2379-8721-9835
1A21-0009-2030-2413-1379-5141
1A21-0009-3030-2281-6907-7325
1A21-0009-3030-2362-2187-7422
1A21-0009-3030-2455-0066-4865
1A21-0009-4030-2283-7004-3067
1A21-0009-4030-2380-7311-0059
1A21-0009-4030-2417-7812-3784
1A21-0009-5030-2224-7509-2621
1A21-0009-5030-2362-8422-6935
1A21-0009-5030-2481-9230-7948
1A21-0009-6030-2203-6402-4749
1A21-0009-6030-2356-1682-4208
1A21-0009-6030-2494-9024-8608
1A21-0009-7030-2245-0470-6801
1A21-0009-7030-2367-8422-3174
1A21-0009-7030-2449-8018-6606
1A21-0009-8030-2272-2995-5548
1A21-0009-8030-2375-9832-4023
1A21-0009-8030-2420-7004-3095
1A21-0009-9030-2297-7004-3566
1A21-0009-9030-2332-9024-7107
1A21-0009-9030-2437-9125-8277
1A22-020C-0K30-1726-8320-8652*
1A23-0009-0030-2213-0264-3101
1A23-0009-0030-2315-8317-2811
1A23-0009-0030-2405-0264-9777
1A23-0009-1030-2271-1278-8359
1A23-0009-1030-2362-2591-6573
1A23-0009-1030-2420-6402-2291
1A23-0009-2030-2222-7715-8253
1A23-0009-2030-2327-9634-3751
1A23-0009-2030-2469-1981-9258
1A23-0009-3030-2285-9832-3755
1A23-0009-3030-2368-1476-1077
1A23-0009-3030-2440-1981-1084
1A23-0009-4030-2286-3298-1753
1A23-0009-4030-2354-8018-9489
1A23-0009-5030-2211-0975-5818
1A23-0009-5030-2347-7614-0943
1A23-0009-5030-2495-0874-8127
1A23-0009-6030-2259-9529-6826
1A23-0009-6030-2322-9331-3472
1A23-0009-6030-2428-3399-9333
1A23-0009-7030-2289-9024-2999
1A23-0009-7030-2302-0470-9072
1A23-0009-7030-2406-2086-9807
1A23-0009-8030-2216-1682-1066
1A23-0009-8030-2307-1783-5171
1A23-0009-8030-2472-0365-1400
1A23-0009-9030-2236-8927-4006
1A23-0009-9030-2328-9634-7287

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 354MB (362936kB)
Memory in use : 65
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2006
Compilation UDF/ISO
16:18:40 #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

16:18:40 #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

16:18:40 #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

16:18:40 #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

16:18:40 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

16:18:40 #6 Text 0 File Reader.cpp, Line 124
Reader running

16:18:40 #7 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4082N running

16:18:40 #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

16:18:40 #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

16:18:40 #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

16:18:41 #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2029727 (451:03.02, 3964MB)

16:18:41 #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

16:18:41 #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4082N, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

16:18:41 #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16:18:41 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2029728 (2029728) = #2029728/451:3.3
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2029728 blocks [HL-DT-ST DVDRAM GSA-4082N]
--------------------------------------------------------------

16:18:41 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4156882944, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2029728 | lead-out | 1 | 0x41 | 0x00

16:18:41 #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

16:18:41 #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

16:18:41 #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

16:18:41 #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

16:18:41 #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

16:18:41 #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11 080 Ko/s)

16:18:41 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16:18:41 #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

16:18:41 #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

16:18:41 #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16:19:16 #27 SPTI -1135 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x07090000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

16:19:16 #28 CDR -1135 File Writer.cpp, Line 311
Write error
D: HL-DT-ST DVDRAM GSA-4082N

16:19:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

16:19:16 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

16:19:17 #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1

16:19:17 #32 CDR -1135 File WriterStatus.cpp, Line 167
Write error
D: HL-DT-ST DVDRAM GSA-4082N

16:19:17 #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

16:19:17 #34 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 8x (11 080 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 16/07/2004 14:53:14 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 16/07/2004 14:53:54 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 16/07/2004 14:57:12 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
1A21-0009-0030-2260-2187-1693
1A21-0009-0030-2446-9024-8905
1A21-0009-1030-2241-9230-9104
1A21-0009-1030-2332-3193-6877
1A21-0009-1030-2412-7812-6301
1A21-0009-2030-2278-6806-9801
1A21-0009-2030-2379-8721-9835
1A21-0009-2030-2413-1379-5141
1A21-0009-3030-2281-6907-7325
1A21-0009-3030-2362-2187-7422
1A21-0009-3030-2455-0066-4865
1A21-0009-4030-2283-7004-3067
1A21-0009-4030-2380-7311-0059
1A21-0009-4030-2417-7812-3784
1A21-0009-5030-2224-7509-2621
1A21-0009-5030-2362-8422-6935
1A21-0009-5030-2481-9230-7948
1A21-0009-6030-2203-6402-4749
1A21-0009-6030-2356-1682-4208
1A21-0009-6030-2494-9024-8608
1A21-0009-7030-2245-0470-6801
1A21-0009-7030-2367-8422-3174
1A21-0009-7030-2449-8018-6606
1A21-0009-8030-2272-2995-5548
1A21-0009-8030-2375-9832-4023
1A21-0009-8030-2420-7004-3095
1A21-0009-9030-2297-7004-3566
1A21-0009-9030-2332-9024-7107
1A21-0009-9030-2437-9125-8277
1A22-020C-0K30-1726-8320-8652*
1A23-0009-0030-2213-0264-3101
1A23-0009-0030-2315-8317-2811
1A23-0009-0030-2405-0264-9777
1A23-0009-1030-2271-1278-8359
1A23-0009-1030-2362-2591-6573
1A23-0009-1030-2420-6402-2291
1A23-0009-2030-2222-7715-8253
1A23-0009-2030-2327-9634-3751
1A23-0009-2030-2469-1981-9258
1A23-0009-3030-2285-9832-3755
1A23-0009-3030-2368-1476-1077
1A23-0009-3030-2440-1981-1084
1A23-0009-4030-2286-3298-1753
1A23-0009-4030-2354-8018-9489
1A23-0009-5030-2211-0975-5818
1A23-0009-5030-2347-7614-0943
1A23-0009-5030-2495-0874-8127
1A23-0009-6030-2259-9529-6826
1A23-0009-6030-2322-9331-3472
1A23-0009-6030-2428-3399-9333
1A23-0009-7030-2289-9024-2999
1A23-0009-7030-2302-0470-9072
1A23-0009-7030-2406-2086-9807
1A23-0009-8030-2216-1682-1066
1A23-0009-8030-2307-1783-5171
1A23-0009-8030-2472-0365-1400
1A23-0009-9030-2236-8927-4006
1A23-0009-9030-2328-9634-7287

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 1, 4d

Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 638MB (653388kB)
Memory in use : 37
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2006
NeroAPI
17:10:45 #1 Phase 112 File APIProgress.cpp, Line 275
DVD-Video files reallocation started

17:10:45 #2 Phase 114 File APIProgress.cpp, Line 275
DVD-Video files reallocation completed (no file modified)

17:10:45 #3 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted

17:10:45 #4 NEROAPI 7 File Burncd.cpp, Line 3095
Error:\nCannot connect TRF.

17:10:45 #5 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

17:10:45 #6 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 16/07/2004 14:53:14 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 16/07/2004 14:53:54 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 16/07/2004 14:57:12 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
zammit patricia

1A21-0009-0030-2260-2187-1693
1A21-0009-0030-2446-9024-8905
1A21-0009-1030-2241-9230-9104
1A21-0009-1030-2332-3193-6877
1A21-0009-1030-2412-7812-6301
1A21-0009-2030-2278-6806-9801
1A21-0009-2030-2379-8721-9835
1A21-0009-2030-2413-1379-5141
1A21-0009-3030-2281-6907-7325
1A21-0009-3030-2362-2187-7422
1A21-0009-3030-2455-0066-4865
1A21-0009-4030-2283-7004-3067
1A21-0009-4030-2380-7311-0059
1A21-0009-4030-2417-7812-3784
1A21-0009-5030-2224-7509-2621
1A21-0009-5030-2362-8422-6935
1A21-0009-5030-2481-9230-7948
1A21-0009-6030-2203-6402-4749
1A21-0009-6030-2356-1682-4208
1A21-0009-6030-2494-9024-8608
1A21-0009-7030-2245-0470-6801
1A21-0009-7030-2367-8422-3174
1A21-0009-7030-2449-8018-6606
1A21-0009-8030-2272-2995-5548
1A21-0009-8030-2375-9832-4023
1A21-0009-8030-2420-7004-3095
1A21-0009-9030-2297-7004-3566
1A21-0009-9030-2332-9024-7107
1A21-0009-9030-2437-9125-8277
1A22-020C-0K30-1726-8320-8652*
1A23-0009-0030-2213-0264-3101
1A23-0009-0030-2315-8317-2811
1A23-0009-0030-2405-0264-9777
1A23-0009-1030-2271-1278-8359
1A23-0009-1030-2362-2591-6573
1A23-0009-1030-2420-6402-2291
1A23-0009-2030-2222-7715-8253
1A23-0009-2030-2327-9634-3751
1A23-0009-2030-2469-1981-9258
1A23-0009-3030-2285-9832-3755
1A23-0009-3030-2368-1476-1077
1A23-0009-3030-2440-1981-1084
1A23-0009-4030-2286-3298-1753
1A23-0009-4030-2354-8018-9489
1A23-0009-5030-2211-0975-5818
1A23-0009-5030-2347-7614-0943
1A23-0009-5030-2495-0874-8127
1A23-0009-6030-2259-9529-6826
1A23-0009-6030-2322-9331-3472
1A23-0009-6030-2428-3399-9333
1A23-0009-7030-2289-9024-2999
1A23-0009-7030-2302-0470-9072
1A23-0009-7030-2406-2086-9807
1A23-0009-8030-2216-1682-1066
1A23-0009-8030-2307-1783-5171
1A23-0009-8030-2472-0365-1400
1A23-0009-9030-2236-8927-4006
1A23-0009-9030-2328-9634-7287

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 352MB (360976kB)
Memory in use : 65
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2006
Compilation UDF/ISO
17:13:54 #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

17:13:54 #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

17:13:54 #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

17:13:54 #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

17:13:54 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

17:13:54 #6 Text 0 File Reader.cpp, Line 124
Reader running

17:13:54 #7 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4082N running

17:13:54 #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

17:13:54 #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

17:13:54 #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

17:13:54 #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286175 (508:02.25, 4465MB)

17:13:54 #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

17:13:54 #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4082N, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

17:13:54 #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:13:54 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [HL-DT-ST DVDRAM GSA-4082N]
--------------------------------------------------------------

17:13:54 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286176 | lead-out | 1 | 0x41 | 0x00

17:13:54 #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:13:54 #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

17:13:54 #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

17:13:55 #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

17:13:55 #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

17:13:55 #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11 080 Ko/s)

17:13:55 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:13:55 #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

17:13:55 #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

17:13:55 #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:14:35 #27 SPTI -1135 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x07580000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

17:14:35 #28 CDR -1135 File Writer.cpp, Line 311
Write error
D: HL-DT-ST DVDRAM GSA-4082N

17:14:35 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17:14:35 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

17:14:35 #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1

17:14:35 #32 CDR -1135 File WriterStatus.cpp, Line 167
Write error
D: HL-DT-ST DVDRAM GSA-4082N

17:14:35 #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

17:14:35 #34 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 8x (11 080 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 16/07/2004 14:53:14 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 16/07/2004 14:53:54 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 16/07/2004 14:57:12 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
zammit patricia

1A21-0009-0030-2260-2187-1693
1A21-0009-0030-2446-9024-8905
1A21-0009-1030-2241-9230-9104
1A21-0009-1030-2332-3193-6877
1A21-0009-1030-2412-7812-6301
1A21-0009-2030-2278-6806-9801
1A21-0009-2030-2379-8721-9835
1A21-0009-2030-2413-1379-5141
1A21-0009-3030-2281-6907-7325
1A21-0009-3030-2362-2187-7422
1A21-0009-3030-2455-0066-4865
1A21-0009-4030-2283-7004-3067
1A21-0009-4030-2380-7311-0059
1A21-0009-4030-2417-7812-3784
1A21-0009-5030-2224-7509-2621
1A21-0009-5030-2362-8422-6935
1A21-0009-5030-2481-9230-7948
1A21-0009-6030-2203-6402-4749
1A21-0009-6030-2356-1682-4208
1A21-0009-6030-2494-9024-8608
1A21-0009-7030-2245-0470-6801
1A21-0009-7030-2367-8422-3174
1A21-0009-7030-2449-8018-6606
1A21-0009-8030-2272-2995-5548
1A21-0009-8030-2375-9832-4023
1A21-0009-8030-2420-7004-3095
1A21-0009-9030-2297-7004-3566
1A21-0009-9030-2332-9024-7107
1A21-0009-9030-2437-9125-8277
1A22-020C-0K30-1726-8320-8652*
1A23-0009-0030-2213-0264-3101
1A23-0009-0030-2315-8317-2811
1A23-0009-0030-2405-0264-9777
1A23-0009-1030-2271-1278-8359
1A23-0009-1030-2362-2591-6573
1A23-0009-1030-2420-6402-2291
1A23-0009-2030-2222-7715-8253
1A23-0009-2030-2327-9634-3751
1A23-0009-2030-2469-1981-9258
1A23-0009-3030-2285-9832-3755
1A23-0009-3030-2368-1476-1077
1A23-0009-3030-2440-1981-1084
1A23-0009-4030-2286-3298-1753
1A23-0009-4030-2354-8018-9489
1A23-0009-5030-2211-0975-5818
1A23-0009-5030-2347-7614-0943
1A23-0009-5030-2495-0874-8127
1A23-0009-6030-2259-9529-6826
1A23-0009-6030-2322-9331-3472
1A23-0009-6030-2428-3399-9333
1A23-0009-7030-2289-9024-2999
1A23-0009-7030-2302-0470-9072
1A23-0009-7030-2406-2086-9807
1A23-0009-8030-2216-1682-1066
1A23-0009-8030-2307-1783-5171
1A23-0009-8030-2472-0365-1400
1A23-0009-9030-2236-8927-4006
1A23-0009-9030-2328-9634-7287

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4082N>Version: CQ04 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 350MB (358820kB)
Memory in use : 65
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2006
Compilation UDF/ISO
17:19:48 #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

17:19:48 #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

17:19:48 #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

17:19:48 #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

17:19:48 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

17:19:48 #6 Text 0 File Reader.cpp, Line 124
Reader running

17:19:48 #7 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4082N running

17:19:48 #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

17:19:48 #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

17:19:48 #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

17:20:19 #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2029727 (451:03.02, 3964MB)

17:20:19 #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

17:20:19 #13 T
PATLAMENACE
Nouveau Membre
 
Messages: 7
Enregistré le: 21 Mai 2006

Messagepar Scaramanga » 21 Mai 2006 19:15

ici :

C:\Program Files\Ahead\Nero\NeroHistory.log
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14146
Enregistré le: 05 Sep 2002

Messagepar PATLAMENACE » 21 Mai 2006 19:18

c'es bon ou pas?
PATLAMENACE
Nouveau Membre
 
Messages: 7
Enregistré le: 21 Mai 2006

Messagepar Scaramanga » 22 Mai 2006 4:40

Code: Tout sélectionner
=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On


Ton Graveur est sur le même port IDE que le disque dur.
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14146
Enregistré le: 05 Sep 2002

Messagepar Stef » 22 Mai 2006 7:26

Pour completer la réponse de Scara qui te dit que c'est jamais bon de brancher un lecteur optique derrière un disque dur, je te proipose à ce suget, un peu de lecture :

Branchement des peripheriques IDE :
http://www.gravure-news.com/html/tuto/18/page01.php

Branchement d'un graveur IDE :
http://www.gravure-news.com/html/tuto/07/page01.php

:wink:
@+ Stef :coucou:

Image
Pas encore membre de gravure-news ? Viens nous rejoindre. Image S'enregistrer :wink:
Avatar de l’utilisateur
Stef
Tutoriel GN-Killer
Tutoriel GN-Killer
 
Messages: 7265
Enregistré le: 21 Sep 2002



  • Publicité

Retourner vers Les graveurs CD / DVD et Blu-ray

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités

cron