Problème de gravure DVD+RW Verbatim X4 Nero 6 Plextor 760A

Alterego · Nouveau Membre Inscrit le: 30 Jan 2009 Messages: 5

Bonjour
j'essaye depuis quelques heures maintenant de graver des DVD+RW de marque Verbatim x4 en mode disque de données sous Nero 6 (version 6.6.1.15) avec un graveur Plextor 760A qui dispose du dernier firmware 1.07et à chaque fois il me marque que mon disque n'est pas valide je crois avoir tout essayé et je ne parviens pas à trouver la solution j'ai utilisé des tas d'autres logiciels et à chaque fois j'ai le même problème...disque non reconnu parfois j'ai erreur calibrage sous Nero...je vous joins le log de Nero

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 11:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <PLEXTOR DVDR PX-760A> Version: 1.07 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PLEXTOR DVDR PX-760A >Version: 1.07 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200M0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200M0 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-760A atapi Port 5 ID 0 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 480MB (492392kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.1.2009
Compilation ISO
22:42:39 #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

22:42:39 #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

22:42:39 #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

22:42:39 #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

22:42:40 #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 822815 (182:50.65, 1607MB)

22:42:40 #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

22:42:40 #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

22:42:40 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:42:40 #9 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 822816 (822816) = #822816/182:50.66
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 822816 blocks [PLEXTOR DVDR PX-760A ]
--------------------------------------------------------------

22:42:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1685127168, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
822816 | lead-out | 1 | 0x41 | 0x00

22:42:40 #11 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

22:42:40 #12 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

22:42:40 #13 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.

22:42:40 #14 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

22:42:40 #15 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5 540 Ko/s)

22:42:40 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22:42:40 #17 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E90F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: INFODISC
Media type ID: A10
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39 ...INFODISCA10.9
23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............

22:42:40 #18 Text 0 File DVDR.cpp, Line 5998
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: Physical disc type
Book Type setting not supported for the loaded disc type

22:42:40 #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

22:42:41 #20 Text 0 File Cdrdrv.cpp, Line 1224
22:42:41.537 - F: PLEXTOR DVDR PX-760A : Queue again later

22:42:55 #21 SPTI -1106 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x07b70080: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

22:42:55 #22 CDR -1106 File Writer.cpp, Line 281
Power calibration error
F: PLEXTOR DVDR PX-760A

22:42:55 #23 Text 0 File DVDR.cpp, Line 5998
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: DVD+R
Book Type setting not supported for the loaded disc type

22:42:55 #24 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5 540 Ko/s)

22:42:56 #25 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

22:43:01 #26 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

22:43:01 #27 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 11:06:00

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**Scaramanga** · Administrateur® Inscrit le: 05 Sep 2002 Messages: 13563

Salut et bienvenue sur le forum de Gravure-News,

Alterego · Nouveau Membre Inscrit le: 30 Jan 2009 Messages: 5

le Mid code est MKM-A02-00 je précise que j'ai aussi un graveur liteon que j'ai débranché et j'ai aussi le même problème...alors que si je grave des DVD+R tout va bien...

**Scaramanga** · Administrateur® Inscrit le: 05 Sep 2002 Messages: 13563

Et le LiteOn les rejette aussi ?

Alterego · Nouveau Membre Inscrit le: 30 Jan 2009 Messages: 5

je viens de réinstaller Windows sur un autre répertoire même problème...quant au LiteOn il ne reconnaît pas le disque dans Nero il me marque "Aucun disque inséré ou le lecteur n'est pas prêt" alors que si je les mets dans le Plextor ils sont bien reconnus mais je n'arrive pas à les formater

Freux · Membre prometteur Inscrit le: 27 Aoû 2005 Messages: 296

A moins d'avoir lu de travers:

franz99 · Posté le: 31 Jan 2009 20:06 Sujet du message:

Freux a partaitement raison (je n'osais intervenir plus tôt afin de ne pas perturber un n-ième sujet)
à moins que ...
Verbatim ne soit allé subitement s'approvisionner en ce MID code exotique INFODISC-A10
A noter cependant: c'est ce que fait à présent Philips pour certains des DVD+RW vendus sous sa marque.

Alterego devrait maintenant nous poster un fichier History de Nero concernant la gravure d'un DVD+RW de marque Verbatim.

Plus simple serait d'ailleurs de poster une capture sous DVD Identifier faite lorsqu'il introduit l'un de ses DVD+RW dans le graveur.

Alterego · Nouveau Membre Inscrit le: 30 Jan 2009 Messages: 5

j'ai réinstallé mes autres graveurs et j'ai retesté mais ça ne change rien les DVD sont bien des MKM-A02 en fait Nero me dit simplement que le disque n'est pas valable et je n'arrive pas à le formater mais je n'ai pas réussi à le formater avec d'autres programmes non plus mais je n'ai pas de soucis avec des DVD+R je vous remets un log de Nero...

j'ai l'impression que le booktype des DVD+RW est bloqué sur DVD-ROM dans le graveur parce que Nero me marque

12:00:32 #18 Text 0 File DVDR.cpp, Line 5998
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: DVD-ROM
Book Type setting not supported for the loaded disc type

c'est peut-être de ce côté-là que je dois chercher et si c'est ça comment puis-je changer le booktype du graveur ? j'ai réinstallé le denier firmware ça n'a rien changé

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 11:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <PLEXTOR DVDR PX-760A> Version: 1.07 - HA 1 TA 1 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PLEXTOR DVDR PX-760A >Version: 1.07 - HA 1 TA 1 - 6.6.1.15
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SONY CD-RW CRX175A1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200M0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200M0 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-760A atapi Port 5 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1653S atapi Port 5 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY CD-RW CRX175A1 X: CDRom0
LITE-ON DVDRW SOHW-1653S Y: CDRom2
PLEXTOR DVDR PX-760A Z: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 372MB (381684kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.2.2009
Compilation ISO
12:00:31 #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:00:31 #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:00:31 #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:00:32 #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

12:00:32 #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 822815 (182:50.65, 1607MB)

12:00:32 #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

12:00:32 #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD+RW

12:00:32 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:00:32 #9 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 822816 (822816) = #822816/182:50.66
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 822816 blocks [PLEXTOR DVDR PX-760A ]
--------------------------------------------------------------

12:00:32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1685127168, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
822816 | lead-out | 1 | 0x41 | 0x00

12:00:32 #11 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:00:32 #12 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

12:00:32 #13 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.

12:00:32 #14 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

12:00:32 #15 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5 540 Ko/s)

12:00:32 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:00:32 #17 SPTI -1066 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x07640180: Len x804

12:00:32 #18 Text 0 File DVDR.cpp, Line 5998
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: DVD-ROM
Book Type setting not supported for the loaded disc type

12:00:32 #19 Phase 98 File dlgbrnst.cpp, Line 1685
Start formatting disc before burning

12:00:42 #20 Phase 100 File dlgbrnst.cpp, Line 1685
Formatting disc was successful

12:00:42 #21 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

12:00:43 #22 SPTI -1046 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x10
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 10
Buffer x09a80040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

12:00:43 #23 CDR -1046 File Writer.cpp, Line 281
Illegal disc
Z: PLEXTOR DVDR PX-760A

12:00:44 #24 Text 0 File DVDR.cpp, Line 5998
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: DVD+R
Book Type setting not supported for the loaded disc type

12:00:44 #25 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5 540 Ko/s)

12:00:45 #26 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:00:48 #27 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

12:00:48 #28 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 11:06:00

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Alterego · Nouveau Membre Inscrit le: 30 Jan 2009 Messages: 5

j'ai eu le même problème avec des disques DVD+RW de marque TDK mais par contre j'arrive à parfaitement graver des DVD+R de marque Verbatim alors je me demande s'il s'agit d'un problème de mon graveur ou bien si ça peut venir du registre de Windows qui me foire tout ?
Dois-je changer de graveur ?