Je viens d'acquérir un graveur de DVD LiteOn SOHW1213S (8x) que j'ai installé en Maitre avec mon graveur de CD ROM Lite On LTR48246S en esclave.
Le DD 80Go est sur une nappe séparé.
Le programme de gravure livré avec est Nero 6 3 1 11 sous XP Pro SP1 qui detecte correctement les DVD dans le graveur.
Le problème est une erreur en début de gravure (à 1%) :
"invalid field in CDB (052400) logical block adress out of range"
j'ai mis à jour le firmware du graveur DVD et je me suis dit que les DVD-R 4,7Go 4x de marque Datawrite (Datasafe Media) n'étaient pas terribles (achetés sur Nierle.de) et j'ai acheté des Philips DVD-R 4,7Go 8x = meme problème
Après avoir parcouru le forum, j'ai trouvé quelques astuces sur des posts similaires que j'ai appliqué:
- changement des pilotes Aspis à la dernière version,
- install du dernier pilote carte mere pour NForce2 (Asus A7N8X /notez que la version indiquée sur un post similaire ne marche pas chez moi)
- Désinstallation propre de Nero 6 puis passage avec utilitaire Neroclean (erreur base de registre trouvées et corrigées) puis réinstallation.
- arret du modem ADSL pour eviter une eventuelle interférence du reseau liée à surcharge pour le processeur.
- J'ai fait de la place et dégageant 5Go sur le DD
- Test de gravure des données à moins de 3Go sur le DVD -R vierge.
- Test avec un CDRW => pas de problème, gravure ok.
Je commence à craquer: ma poubelle se rempli de DVD loupés..
Ci joint le fichier "Log" de Nero lors de ma dernière tentative:
xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Version de Nero : 6.3.1.11 (Nero Express)
Graveur : <LITE-ON DVDRW SOHW-1213S>Version: TS0D - HA 0 TA 2 - 6.3.1.11
Pilote d'adaptateur :<nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM : <LITE-ON DVDRW SOHW-1213S>Version: TS0D - HA 0 TA 2 - 6.3.1.11
Pilote d'adaptateur :<nvatabus> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1213S nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : LITE-ON LTR-48246S nvatabus Port 0 ID 3 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1213S D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 228MB (233500kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.11.2004
Compilation ISO
01:27:12 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
01:27:12 #2 Text 0 File Reader.cpp, Line 118
Reader running
01:27:12 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1213S running
01:27:12 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
01:27:13 #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disque entier, using DVD media
01:27:13 #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1473183 (327:22.33, 2877MB)
01:27:13 #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
01:27:13 #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1213S, Media type: DVD-R
Disc Manufacturer: Prodis - cS03
Disc Application Code: 64, Disc Physical Code: 193
01:27:13 #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
01:27:13 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1473184 (1473184) = #1473184/327:22.34
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1473184 blocks [LITE-ON DVDRW SOHW-1213S]
--------------------------------------------------------------
01:27:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1213S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3017080832, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1473184 | lead-out | 1 | 0x00 | 0x41
01:27:13 #12 Phase 24 File dlgbrnst.cpp, Line 1836
Début de mise en cache des fichiers
01:27:14 #13 Text 0 File Burncd.cpp, Line 4206
Cache writing successful.
01:27:14 #14 Phase 25 File dlgbrnst.cpp, Line 1836
Cache des fichiers terminé
01:27:14 #15 Phase 28 File dlgbrnst.cpp, Line 1836
Début mesure de vitesse
01:27:14 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
01:30:07 #17 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1213S> start writing Lead-Out at LBA 1473184 (167AA0h), lenght 0 blocks
01:30:07 #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
01:30:07 #19 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK
01:30:07 #20 Phase 29 File dlgbrnst.cpp, Line 1787
Mesure de vitesse terminée : 12,4x (17 244 Ko/s)
01:30:08 #21 Phase 32 File dlgbrnst.cpp, Line 1836
Début de simulation à 4x (5 520 Ko/s)
01:30:08 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
01:30:08 #23 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 9:16,797 (556797ms) -> OK
01:30:08 #24 Text 0 File DVDR.cpp, Line 1664
Recording mode: Sequential Recording Mode
01:30:08 #25 Text 0 File Mmc.cpp, Line 20125
Set BUFE: supported -> ON , SMART-BURN : ON
01:30:08 #26 Text 0 File DVDR.cpp, Line 1805
Start write address at LBA 0
DVD high compatibility mode: Yes
01:30:08 #27 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01:34:04 #28 SCSI -1023 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x09A00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
01:34:04 #29 CDR -1023 File Writer.cpp, Line 304
Erreur de séquence de commandes
01:34:04 #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
01:34:04 #31 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
01:34:04 #32 Text 0 File DVDR.cpp, Line 2015
EndDAO: Last written address was 31
01:34:04 #33 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK
01:34:04 #34 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK
01:34:04 #35 Phase 34 File dlgbrnst.cpp, Line 1836
La simulation a échoué à 4x (5 520 Ko/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 2, 3, size=99568 bytes, created 24/03/2004 18:44:50 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 2, 3, size=27664 bytes, created 24/03/2004 18:45:22 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 2, 3, size=9561 bytes, created 24/03/2004 18:45:02 (InCD4 driver for win NT/2K/XP)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03/06/2004 10:40:46 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Test avec cloneDVD et film "Stalingrad": bien passé mais disque illisible dans le graveur et sur ma platine de salon
Quelqu'un aurait il une idée concernant cet erreur?
Merci d'avance.
Bassmaniac
Flux RSS