9K20-7858-0495-4K64-5025-XC89-**** Windows Vista 6.1 IA32 WinAspi: - NT-SPTI used Nero Version: 8.3.13.0 Internal Version: 8, 3, 13, 0 Recorder: Version: EL02 - HA 1 TA 0 - 8.3.13.0 Adapter driver: HA 1 Drive buffer : 4096kB Bus Type : default CD-ROM: Version: 1.4 - HA 1 TA 1 - 8.3.13.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : ELBY CLONEDRIVE 1.4 VClone Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST BD-RE BH08NS20 E: CdRom0 PLEXTOR DVDR PX-755A G: CdRom3 ELBY CLONEDRIVE I: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 30 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.12.2009 Graver une image BD 09:50:06 #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 09:50:06 #2 Text 0 File Burncd.cpp, Line 3639 Turn on Disc-At-Once, using Blu-ray Disc media 09:50:10 #3 Text 0 File DlgWaitCD.cpp, Line 311 Last possible write address on media: 11826175 (2628:02.25, 23097MB) Last address to be written: 11788799 (2619:43.74, 23024MB) 09:50:10 #4 Text 0 File DlgWaitCD.cpp, Line 323 Write in overburning mode: NO (enabled: CD) 09:50:10 #5 Text 0 File DlgWaitCD.cpp, Line 2946 Recorder: HL-DT-ST BD-RE BH08NS20, Media type: BD-RE 09:50:10 #6 Text 0 File DlgWaitCD.cpp, Line 497 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: BD-RE. Medium required by compilation: BD-R/RE; BD DL.) This disc is not empty. (Medium in drive: BD-RE. Medium required by compilation: BD-R/RE; BD DL.) Accessing disc... (Medium in drive: BD-RE. Medium required by compilation: BD-R/RE; BD DL.) 09:50:10 #7 Text 0 File ThreadedTransferInterface.cpp, Line 754 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1) 2 indices, index0 (150) not provided original disc pos #0 + 11788800 (11788800) = #11788800/2619:44.0 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11788800 blocks [E: HL-DT-ST BD-RE BH08NS20] -------------------------------------------------------------- 09:50:10 #8 Text 0 File ThreadedTransferInterface.cpp, Line 956 Prepare [E: HL-DT-ST BD-RE BH08NS20] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 24143462400, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 11788800 | 11788800 | 0x00 11788800 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 09:50:10 #9 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 09:50:10 #10 Text 0 File Burncd.cpp, Line 4430 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 09:50:10 #11 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 09:50:10 #12 Text 0 File Burncd.cpp, Line 4552 Cache writing successful. 09:50:10 #13 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 09:50:10 #14 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 1x (4 495 Ko/s) 09:50:11 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2673 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 09:50:11 #16 Text 0 File Cdrdrv.cpp, Line 10187 ---- Disc Structure (BD): Disc Information on BD (00h) ---- Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 --- Header --- Disc Information Identifier: Disc Information Format: 01 h Number of DI Units/Aux Frames in each DI block: 2 Number of (recording) layer to which this DI Unit applies: 0 DI unit Sequence Number in DI Block: 0 Continuation flag: Next DI Unit is the start of a new set of parameters (0) Number of DI bytes in use in this DI unit: 99 --- Body --- Disc Type Identifier: Disc Size/Class/Version: 2 DI Unit Format dependent contents: BD Structure: 20 (14 h): 1 recording layer (SL), BD-RE Hybrid Disc identifier/Channel bit length: 1 (1 h): no DVD layer present, no CD layer present channel bit length of 74,5 nm (25.0 GB max. per layer) Push-Pull polarity flag bits: 00 h BCA descriptor: BCA-code present (1) Maximum transfer rate needed by the application: 0 Mbit/s Data zone allocation: First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072) Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494) Recording velocities: Nominal Recording Velocity: 4.92 m/s (1EC h) Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1 Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1 ... 14 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00 00 19 4E 7E 01 EC 64 64 - 28 28 28 28 1E 1E 1E 1E 00 00 00 00 54 50 77 04 - 04 78 78 1D 54 50 77 04 04 78 78 1D 54 50 77 04 - 04 78 78 1D 50 60 60 60 20 20 20 20 20 20 20 20 - 20 00 00 00 00 B8 B8 B8 B8 B8 B8 B8 B8 B8 00 00 --- Trailer --- Disc Manufacturer ID: 43 4D 43 4D 41 47 h Media Type ID: 43 4E 32 Time Stamp [m:y]: 0 : 0000 (00 00 h) Product Revision Number: 0 09:50:25 #17 Text 0 File BD.cpp, Line 539 Format BD-RE with Format Type 0h, sub-type 0, spare area size 0 -> return code 0 Allocated spare area size on disc 393216 BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0), spare area allocation: allocation (1), Stream recording: NO (0); return code 0 09:50:25 #18 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 09:56:02 #19 SPTI -500 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500) CDB Data: 0x2A 00 00 0C C4 E0 00 00 20 00 00 00 Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x1b5a9400: Len x10000 0xE3 BC 64 85 AD 64 2C C6 5D 76 57 4B A2 51 25 D9 0x9A AC BB 92 35 49 65 45 48 66 2F 8F AA DC 27 C6 0x48 3E 59 6C 52 D0 14 9D 23 C8 C7 14 BF 59 19 9B 10:01:07 #20 SPTI -500 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500) CDB Data: 0x2A 00 00 18 25 80 00 00 20 00 00 00 Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x1c83de40: Len x10000 0x81 BB CE B2 CA 5E DB 40 29 6E C1 76 A9 78 61 06 0xAC BA 95 73 D5 26 93 BE 82 58 CE 98 C2 37 22 29 0xBC 1C DF DC 65 A3 F9 66 2A 2A F3 01 08 EB D9 F4 10:03:55 #21 SPTI -500 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500) CDB Data: 0x2A 00 00 1E 75 20 00 00 20 00 00 00 Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x1d150280: Len x10000 0x0D 8F FD 63 47 10 11 1C 6D CE 43 7E 9D 8E AF B2 0xEC 02 FB 84 57 67 AF E4 BE A9 07 16 83 12 FB E3 0x73 6F 61 A5 F9 8A A4 B7 EC 47 24 39 0F 41 62 D7 10:04:13 #22 SPTI -500 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500) CDB Data: 0x2A 00 00 1F 14 60 00 00 20 00 00 00 Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x1d110180: Len x10000 0xE9 C4 7A E8 7A B0 A3 93 66 E1 91 F7 EB F1 C4 BE 0x2A 56 A0 28 33 6A 5D A3 52 C1 07 32 8E 46 C0 65 0x0B D0 1E 4E 19 47 FF FA A0 9A 11 05 A0 4F 07 B3 10:04:27 #23 SPTI -500 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500) CDB Data: 0x2A 00 00 1F 8E E0 00 00 20 00 00 00 Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x1be6b700: Len x10000 0x44 5D 68 6E D3 73 9D FF 58 65 69 B7 40 AC C1 EC 0x95 E7 7C 85 3E 40 BA 48 C5 F7 E5 CA BF 21 4C EC 0xDB 1B 69 AF 53 DD 1F C1 25 03 C3 54 FB 6B 4A 9B 10:21:07 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) CDB Data: 0x2A 00 00 1F 8E E0 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x02 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 B0 0C 02 Buffer x08d8f200: Len x10000 0x44 5D 68 6E D3 73 9D FF 58 65 69 B7 40 AC C1 EC 0x95 E7 7C 85 3E 40 BA 48 C5 F7 E5 CA BF 21 4C EC 0xDB 1B 69 AF 53 DD 1F C1 25 03 C3 54 FB 6B 4A 9B 10:21:07 #25 CDR -1135 File Writer.cpp, Line 306 Write error E: HL-DT-ST BD-RE BH08NS20 10:21:13 #26 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 1x (4 495 Ko/s) 10:21:13 #27 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:21:18 #28 Text 0 File Cdrdrv.cpp, Line 11450 DriveLocker: UnLockVolume completed 10:21:18 #29 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:24:00 #30 SPTI -1066 File SCSIPassThrough.cpp, Line 214 CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1066) CDB Data: 0x5A 00 30 00 00 00 00 00 20 00 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x050142c0: Len x20 Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon