Posté le: 22 Avr 2008 2:30 Sujet du message: Le px-810sa vaut un 5/20.... (?) ! ....
Bonjour,
Avant tout je tiens à féliciter les admins de ce site, riche et superbement complet !
Alors par quoi je commence moi ...
J'ai fait l'achat d'un px-810sa (hautement congratulé et élogé par "les" critiques comme considéré comme l'un des meilleurs graveurs du marché )
Mais bien sur ...
Je sais pas si ça vient de moi mais bon, je donne mon avis !
Je grave depuis 1 semaine, et tout ce que je peux vous dire c'est que c'est catastrophique niveau qualité !
quand je grave un dvd : une multitude de parasite sur la vidéo (vous savez ... TOUT plein de points, l'image n'est pas fluide et n'est pas nette, bref vraiment hideuse )
et je remarque ça sur plusieurs films gravés (dvd5)
j'ai pourtant des verbatim, des tdk, des sony ....
J'ai fait une mise à jour du firmware
JE grave en vitesse 4
je dégragmente mes disques ...
et rien .... TOUJOURS la meme qualité ... c'est à dire affreuse !
c'est alors que je me suis dit de gravé avec mon ancien graveur pioneer 11D (pour voir s'il n'y a pas un problème)
ET C'est vraiment bluffant ! j'ai gravé pendant plus d'un an et demi et toujours au top !
j'ai donc gravé le meme dvd ... ET tout ce que j'ai décrit au dessus est contraire au pioneer !!!
j'ai fait l'achat de ce graveur pour rien !
retour a la source !
vive pioneer !
Mais bon, jsuis pas heureux .... J'aimerais juste comprendre ce qu'il cloche a la fin ....
-Aurais tu un fichier log à nous mettre sous la dent ?
-As tu vérifié si une mise à jour du firmware était disponible ?
-Comment est connecté ton graveur ?
IRONS Nouveau Membre
Inscrit le: 22 Avr 2008 Messages: 6
Posté le: 23 Avr 2008 3:20 Sujet du message:
Citation:
Salut et bienvenue sur le forum de Gravure-News
MERCI !
Citation:
C'est marrant, parce qu'en fait le 810 SA n'est pas un "vria " Plextor, mais un Pioneer rebadgé !
ah oui ? vraiment ? C'est comme une fichue contrefaçon alors
760 Le plus récent ? ET le plus effficace c'est lequel alors ?
Citation:
-Aurais tu un fichier log à nous mettre sous la dent ?
-As tu vérifié si une mise à jour du firmware était disponible ?
-Comment est connecté ton graveur ?
-non sorry... (pourquoi faire ?)
-oui...
-bah c'est du sata... Faut il faire quelque chose de particulier ?
Scaramanga Administrateur®
Inscrit le: 05 Sep 2002 Messages: 12387
Posté le: 23 Avr 2008 4:13 Sujet du message:
Citation:
bah c'est du sata... Faut il faire quelque chose de particulier ?
Vérifie si ta CM possède les derniers pilotes, chipset, tout ça.
IRONS Nouveau Membre
Inscrit le: 22 Avr 2008 Messages: 6
Posté le: 24 Avr 2008 15:03 Sujet du message:
Scaramanga a écrit:
Citation:
bah c'est du sata... Faut il faire quelque chose de particulier ?
Vérifie si ta CM possède les derniers pilotes, chipset, tout ça.
Merci ! c'est fait !
mais j'ai eu un big plantage lors d'une autre gravure ... elle a planté au bout de 1 minute a peu près
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1534MB (1571776kB)
Free physical memory: 936MB (959116kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.4.2008
Burn DVD Image
14:22:54 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
14:22:54 #2 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media
14:22:55 #3 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2292459 (509:26.09, 4477MB)
14:22:55 #4 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
14:22:55 #5 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: PLEXTOR DVDR PX-810SA, Media type: DVD+R
Disc Manufacturer ID: <Plasmon2>, Media Type ID: <C01>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
14:22:55 #6 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:22:55 #7 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2292460 (2292460) = #2292460/509:26.10
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2292460 blocks [D: PLEXTOR DVDR PX-810SA]
--------------------------------------------------------------
14:22:55 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
14:22:55 #10 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
14:22:55 #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
14:22:55 #12 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
14:22:55 #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
14:22:55 #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2.4x (3 324 KB/s)
14:22:55 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
15:48:33 #6 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
15:48:34 #7 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
15:48:34 #8 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media
15:48:34 #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
15:48:34 #10 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
15:48:34 #11 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
15:48:34 #12 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2263807 (503:04.07, 4421MB)
15:48:34 #13 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
15:48:34 #14 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: PLEXTOR DVDR PX-810SA, Media type: DVD+R
Disc Manufacturer ID: <MCC>, Media Type ID: <004>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
15:48:34 #15 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:48:34 #16 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2263808 (2263808) = #2263808/503:4.8
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263808 blocks [D: PLEXTOR DVDR PX-810SA]
--------------------------------------------------------------
15:48:34 #18 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
15:48:34 #19 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
15:48:34 #20 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
15:48:34 #21 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
15:48:34 #22 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
15:48:34 #23 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (5 540 KB/s)
15:48:34 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
Recorder: <PLEXTOR DVDR PX-810SA> Version: 1.01 - HA 1 TA 1 - 8.3.6.0
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2000kB
Bus Type : default
CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS03 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080M0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-810SA atapi Port 2 ID 1 DMA: On
CdRomPeripheral : YZUHM GDQ3S5UR4PUZ 1.03 a8stznhf Port 4 ID 0 DMA: Off
DiskPeripheral : NDAS ndasscsi Port 5 ID 0 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1534MB (1571560kB)
Free physical memory: 704MB (721212kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.7.2008
Compilation ISO
10:04:55 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:04:56 #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:04:56 #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
10:04:56 #4 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media
10:04:56 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
10:04:56 #6 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2127487 (472:46.37, 4155MB)
10:04:56 #7 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
10:04:56 #8 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: PLEXTOR DVDR PX-810SA, Media type: DVD-R
Disc Manufacturer ID: <INFOME> <DIAR30>
Disc Application Code: 64, Disc Physical Code: 193
10:04:56 #9 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:04:56 #10 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2127488 (2127488) = #2127488/472:46.38
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2127488 blocks [H: PLEXTOR DVDR PX-810SA]
--------------------------------------------------------------
10:04:56 #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
10:04:56 #13 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
10:04:56 #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
10:04:56 #15 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
10:04:56 #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
10:04:56 #17 Phase 32 File dlgbrnst.cpp, Line 1767
Simulation started at 4x (5 540 Ko/s)
10:05:06 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:05:06 #19 Text 0 File DVDR.cpp, Line 3297
Recording mode: Sequential Recording Mode
10:05:07 #20 Text 0 File DVDR.cpp, Line 3451
Start write address at LBA 0
DVD high compatibility mode: Yes
10:05:07 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x04b3a1c0: Len x648
Recorder: <PLEXTOR DVDR PX-810SA> Version: 1.01 - HA 1 TA 1 - 8.3.6.0
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2000kB
Bus Type : default
CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS03 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080M0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-810SA atapi Port 2 ID 1 DMA: On
CdRomPeripheral : YZUHM GDQ3S5UR4PUZ 1.03 a8stznhf Port 4 ID 0 DMA: Off
DiskPeripheral : NDAS ndasscsi Port 5 ID 0 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1534MB (1571560kB)
Free physical memory: 841MB (861720kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.7.2008
CD-ROM (ISO)
11:01:21 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:01:21 #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:01:21 #3 Text 0 File Burncd.cpp, Line 3238
PLEXTOR DVDR PX-810SA
BURN-Proof activés
11:01:21 #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
11:01:24 #5 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media
11:01:25 #6 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorCD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
11:01:25 #7 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 356150 ( 79:10.50)
11:01:25 #8 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
11:01:25 #9 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: PLEXTOR DVDR PX-810SA;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)
11:01:25 #10 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:01:25 #11 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 356151 (356151) = #356151/79:8.51
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356151 blocks [H: PLEXTOR DVDR PX-810SA]
--------------------------------------------------------------
11:01:30 #13 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
11:01:30 #14 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
11:01:30 #15 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
11:01:30 #16 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
11:01:30 #17 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
11:01:30 #18 Phase 32 File dlgbrnst.cpp, Line 1767
Simulation started at 4x (600 Ko/s)
11:01:30 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:01:30 #20 Text 0 File MMC.cpp, Line 17846
StartDAO : CD-Text - Off
11:01:30 #21 Text 0 File MMC.cpp, Line 22530
Set BUFE: BURN-Proof -> ON
Vous ne pouvez pas poster de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets dans ce forum Vous ne pouvez pas éditer vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum Vous pouvez joindre des fichiers Vous pouvez télécharger des fichiers
FAQ
Règlements
Rechercher
Téléchargement
S'enregistrer
Profil
Se connecter pour vérifier ses messages privés
Connexion
Carte des membres
)
