salut a tous
j'eesaye de graver un dvd + rw avec mon graveur dvd 11d de pionner et un dvd rw+ verbatim. Or j'ai un message d'erreur lors du gravage. je suis avec nero 7 et il me met echec lors de la gravure...
Quelqu'un peut il m'aider svp . Merci
ps: je n'ai pas de souci avec les dvd rw-
probleme de gravure avec dvd 111-D pioneer
16 messages
• Page 1 sur 1
probleme de gravure avec dvd 111-D pioneer
par damos » 26 Déc 2006 18:56
- damos
- Nouveau Membre
- Messages: 4
- Enregistré le: 26 Déc 2006
par Koba » 26 Déc 2006 19:01
Bonjour et bienvenue sur le forum de Gravure-News.
Plutôt que de poster un message correctif, tu peux utiliser le bouton "éditer" disponible en haut à droite de chacun de tes messages et grâce auquel tu pourras rectifier tes éventuelles erreurs.
Plutôt que de poster un message correctif, tu peux utiliser le bouton "éditer" disponible en haut à droite de chacun de tes messages et grâce auquel tu pourras rectifier tes éventuelles erreurs.
"Il vaut mieux mourir debout que vivre agenouillé" (Emiliano Zapata)
"La douleur est temporaire : qu'elle dure une minute, une heure, un jour ou même une année, peu importe, elle finira toujours par s'estomper. En revanche, si j'abandonne, ça ne s'effacera jamais" (Lance Armstrong)
Suivez Les Aventures de Findus
"La douleur est temporaire : qu'elle dure une minute, une heure, un jour ou même une année, peu importe, elle finira toujours par s'estomper. En revanche, si j'abandonne, ça ne s'effacera jamais" (Lance Armstrong)
Suivez Les Aventures de Findus
-
Koba - Modérateur vil et fourbe
- Messages: 11920
- Enregistré le: 15 Oct 2002
- Localisation: Belgique - Geer
par Scaramanga » 27 Déc 2006 10:10
As tu le dernier firmware, comment est connecté ce graveur ?
Peux tu nous coller le fichier Log de Nero ?
Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.
En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:\Program Files\Nero\Nero7\Core\ pour nero 7, il se nomne NeroHistoryLog .
On peut le visualier avec un éditeur de texte , bloc note de windows par exemple. Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log. tu peux le coller entre les balise [ code ] et [ /code ].
Peux tu nous coller le fichier Log de Nero ?
Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.
En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:\Program Files\Nero\Nero7\Core\ pour nero 7, il se nomne NeroHistoryLog .
On peut le visualier avec un éditeur de texte , bloc note de windows par exemple. Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log. tu peux le coller entre les balise [ code ] et [ /code ].
-
Scaramanga - Administrateur®
- Messages: 14171
- Enregistré le: 05 Sep 2002
par damos » 27 Déc 2006 11:16
Voila, j'espère que j'ai bien supprimé le numéro de série, me tenir au courant sinon, merci 
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero API version: 7.5.1.1
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 1, 1
Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.19 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6V200E0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-111D1.19 JRAID Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 456MB (467764kB)
Memory in use : 55
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.10.2006
NeroAPI
14:25:12 #1 Text 0 File Burncd.cpp, Line 3129
PIONEER DVD-RW DVR-111D
Buffer underrun protection activés
14:25:12 #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory
14:25:12 #3 Text 0 File Reader.cpp, Line 126
Reader running
14:25:12 #4 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
14:25:12 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
14:25:12 #6 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using CD-R/RW media
14:25:27 #7 Text 0 File DlgWaitCD.cpp, Line 300
Disc check failed: Medium not allowed (Wrong CD)
14:25:27 #8 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)
14:25:27 #9 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: PIONEER DVD-RW DVR-111D
Medium not present
14:25:27 #10 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD+RW. Medium required by compilation: CD-R/RW.)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero API version: 7.5.1.1
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 1, 1
Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.19 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6V200E0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-111D1.19 JRAID Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 457MB (468344kB)
Memory in use : 55
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.10.2006
NeroAPI
14:33:24 #1 Text 0 File VCDCompilationImpl.cpp, Line 711
Super Video CD compatibility options:
Videos directory: MPEG2
ENTRIES.SVD File Identification: ENTRYVCD
14:33:24 #2 Text 0 File Burncd.cpp, Line 3129
PIONEER DVD-RW DVR-111D
Buffer underrun protection activés
14:33:24 #3 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory
14:33:24 #4 Text 0 File Reader.cpp, Line 126
Reader running
14:33:24 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
14:33:24 #6 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
14:33:24 #7 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using CD-R/RW media
14:33:43 #8 Text 0 File DlgWaitCD.cpp, Line 300
Disc check failed: Medium not allowed (Wrong CD)
14:33:43 #9 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)
14:33:43 #10 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: PIONEER DVD-RW DVR-111D;
CD type reading failed
ATIP Data: ?
14:33:43 #11 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD+RW. Medium required by compilation: CD-R/RW.)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero API version: 7.5.1.1
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 1, 1
Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.19 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6V200E0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-111D1.19 JRAID Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 150MB (154352kB)
Memory in use : 85
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.12.2006
NeroAPI
09:17:51 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
09:17:52 #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 262144KB of Memory
09:17:52 #3 Text 0 File Reader.cpp, Line 126
Reader running
09:17:52 #4 Text 0 File Writer.cpp, Line 123
Writer D: PIONEER DVD-RW DVR-111D running
09:17:52 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
09:17:52 #6 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
09:17:52 #7 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using DVD media
09:17:52 #8 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2168175 (481:49.00, 4234MB)
09:17:52 #9 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)
09:17:52 #10 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD-RW
Disc Manufacturer: MCC 01 - RW4X
Disc Application Code: 2, Disc Physical Code: 214
09:17:52 #11 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:17:52 #12 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2168176 (2168176) = #2168176/481:49.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2168176 blocks [D: PIONEER DVD-RW DVR-111D]
--------------------------------------------------------------
09:17:52 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [D: PIONEER DVD-RW DVR-111D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4440424448, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2168176 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2168176 | 0 | 0x00
2168176 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
09:17:52 #14 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
09:17:52 #15 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
09:17:52 #16 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.
09:17:52 #17 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
09:17:52 #18 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5 540 Ko/s)
09:17:52 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
09:17:53 #20 Text 0 File DVDR.cpp, Line 2969
Recording mode: Sequential Recording Mode
09:17:53 #21 Text 0 File DVDR.cpp, Line 3125
Start write address at LBA 0
DVD high compatibility mode: Yes
09:17:53 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 291
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x085fd800: Len x648
09:17:53 #23 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
09:17:57 #24 Text 0 File Cdrdrv.cpp, Line 1290
09:17:57.343 - D: PIONEER DVD-RW DVR-111D : Queue again later
09:31:57 #25 Text 0 File WriterStatus.cpp, Line 116
<D: PIONEER DVD-RW DVR-111D> start writing Lead-Out at LBA 2168176 (211570h), length 0 blocks
09:31:57 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
09:31:57 #27 Text 0 File DVDR.cpp, Line 3341
EndDAO: Last written address was 2168175
09:31:57 #28 Phase 181 File APIProgress.cpp, Line 282
Writing lead-out...
09:31:57 #29 Text 0 File DVDR.cpp, Line 3374
Estimated time for 30mm Borders: 0min 00sec
09:32:33 #30 Phase 37 File APIProgress.cpp, Line 282
Burn process completed successfully at 4x (5 540 Ko/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero API version: 7.5.1.1
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 1, 1
Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.19 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6V200E0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-111D1.19 JRAID Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 456MB (467764kB)
Memory in use : 55
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.10.2006
NeroAPI
14:25:12 #1 Text 0 File Burncd.cpp, Line 3129
PIONEER DVD-RW DVR-111D
Buffer underrun protection activés
14:25:12 #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory
14:25:12 #3 Text 0 File Reader.cpp, Line 126
Reader running
14:25:12 #4 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
14:25:12 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
14:25:12 #6 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using CD-R/RW media
14:25:27 #7 Text 0 File DlgWaitCD.cpp, Line 300
Disc check failed: Medium not allowed (Wrong CD)
14:25:27 #8 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)
14:25:27 #9 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: PIONEER DVD-RW DVR-111D
Medium not present
14:25:27 #10 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD+RW. Medium required by compilation: CD-R/RW.)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero API version: 7.5.1.1
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 1, 1
Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.19 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6V200E0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-111D1.19 JRAID Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 457MB (468344kB)
Memory in use : 55
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.10.2006
NeroAPI
14:33:24 #1 Text 0 File VCDCompilationImpl.cpp, Line 711
Super Video CD compatibility options:
Videos directory: MPEG2
ENTRIES.SVD File Identification: ENTRYVCD
14:33:24 #2 Text 0 File Burncd.cpp, Line 3129
PIONEER DVD-RW DVR-111D
Buffer underrun protection activés
14:33:24 #3 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory
14:33:24 #4 Text 0 File Reader.cpp, Line 126
Reader running
14:33:24 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
14:33:24 #6 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
14:33:24 #7 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using CD-R/RW media
14:33:43 #8 Text 0 File DlgWaitCD.cpp, Line 300
Disc check failed: Medium not allowed (Wrong CD)
14:33:43 #9 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)
14:33:43 #10 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: PIONEER DVD-RW DVR-111D;
CD type reading failed
ATIP Data: ?
14:33:43 #11 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD+RW. Medium required by compilation: CD-R/RW.)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero API version: 7.5.1.1
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 1, 1
Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.19 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6V200E0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-111D1.19 JRAID Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 150MB (154352kB)
Memory in use : 85
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.12.2006
NeroAPI
09:17:51 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
09:17:52 #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 262144KB of Memory
09:17:52 #3 Text 0 File Reader.cpp, Line 126
Reader running
09:17:52 #4 Text 0 File Writer.cpp, Line 123
Writer D: PIONEER DVD-RW DVR-111D running
09:17:52 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
09:17:52 #6 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
09:17:52 #7 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using DVD media
09:17:52 #8 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2168175 (481:49.00, 4234MB)
09:17:52 #9 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)
09:17:52 #10 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD-RW
Disc Manufacturer: MCC 01 - RW4X
Disc Application Code: 2, Disc Physical Code: 214
09:17:52 #11 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:17:52 #12 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2168176 (2168176) = #2168176/481:49.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2168176 blocks [D: PIONEER DVD-RW DVR-111D]
--------------------------------------------------------------
09:17:52 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [D: PIONEER DVD-RW DVR-111D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4440424448, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2168176 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2168176 | 0 | 0x00
2168176 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
09:17:52 #14 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
09:17:52 #15 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
09:17:52 #16 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.
09:17:52 #17 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
09:17:52 #18 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5 540 Ko/s)
09:17:52 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
09:17:53 #20 Text 0 File DVDR.cpp, Line 2969
Recording mode: Sequential Recording Mode
09:17:53 #21 Text 0 File DVDR.cpp, Line 3125
Start write address at LBA 0
DVD high compatibility mode: Yes
09:17:53 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 291
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x085fd800: Len x648
09:17:53 #23 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
09:17:57 #24 Text 0 File Cdrdrv.cpp, Line 1290
09:17:57.343 - D: PIONEER DVD-RW DVR-111D : Queue again later
09:31:57 #25 Text 0 File WriterStatus.cpp, Line 116
<D: PIONEER DVD-RW DVR-111D> start writing Lead-Out at LBA 2168176 (211570h), length 0 blocks
09:31:57 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
09:31:57 #27 Text 0 File DVDR.cpp, Line 3341
EndDAO: Last written address was 2168175
09:31:57 #28 Phase 181 File APIProgress.cpp, Line 282
Writing lead-out...
09:31:57 #29 Text 0 File DVDR.cpp, Line 3374
Estimated time for 30mm Borders: 0min 00sec
09:32:33 #30 Phase 37 File APIProgress.cpp, Line 282
Burn process completed successfully at 4x (5 540 Ko/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
- damos
- Nouveau Membre
- Messages: 4
- Enregistré le: 26 Déc 2006
par Scaramanga » 27 Déc 2006 11:21
- Code: Tout sélectionner
CdRomPeripheral : PIONEER DVD-RW DVR-111D1.19 JRAID Port 4 ID 0 DMA: Off
Active le mode de trnasfert DMA : http://www.gravure-news.com/html/tuto/03/page01.php
- Code: Tout sélectionner
Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.19
Met à jour le firmware de ton pioneer !
-
Scaramanga - Administrateur®
- Messages: 14171
- Enregistré le: 05 Sep 2002
par b_gaborit » 31 Déc 2006 13:46
Bonjour,
J'ai le même souci que toi avec des DVD+RW Lekium. La version de mon firmware est pourtant à jour mais je n'arrive par contre pas à activer le mode DMA. A savoir que mon graveur est sur la même nappe qu'un disque dur et que XP me detecte 2 canaux primaires et 2 canaux secondaires alors qu'il n'y a qu'un seul port IDE sur ma carte mère avec ce disque dur et mon graveur. Je ne comprend pas bien tout çà. Merci d'avance pour vos infos.
Voici le log Nero:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.29 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-111D>Version: 1.29 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3320620AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00CA JRAID Port 4 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-111D1.29 JRAID Port 4 ID 1 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 688MB (704552kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.12.2006
Compilation ISO
12:20:35 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:20:35 #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:20:35 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
12:20:35 #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
12:20:35 #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 360031 ( 80:00.31, 703MB)
12:20:35 #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
12:20:35 #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD+RW
Disc Manufacturer ID: MBIPG101, Media Type ID: W04, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
12:20:35 #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:20:35 #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 360032 (360032) = #360032/80:0.32
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 360032 blocks [D: PIONEER DVD-RW DVR-111D]
--------------------------------------------------------------
12:20:35 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [D: PIONEER DVD-RW DVR-111D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 737345536, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 360032 | 0 | 0x00
0 | 1 | 1 | 0x41 | 360032 | 0 | 0x00
360032 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:20:36 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:20:36 #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
12:20:36 #13 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
12:20:36 #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
12:20:36 #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 2.4x (3 324 Ko/s)
12:20:36 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:20:36 #17 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MBIPG101
Media type ID: W04
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............
12:20:36 #18 Phase 98 File dlgbrnst.cpp, Line 1746
Start formatting disc before burning
12:20:36 #19 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0x04 11 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 20
Buffer x06622140: Len xc
0x00 82 00 08 00 23 05 40 98 00 00 00
12:20:36 #20 Phase 101 File dlgbrnst.cpp, Line 1746
Formatting disc failed
12:20:36 #21 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
12:20:36 #22 CDR -1065 File ThreadedTransferInterface.cpp, Line 1779
Invalid command
D: PIONEER DVD-RW DVR-111D
12:20:36 #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1779
Could not perform start of Disc-at-once
12:20:36 #24 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 2.4x (3 324 Ko/s)
12:20:36 #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:20:38 #26 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
12:20:38 #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 5, 0, 11, size=102912 bytes, created 10/11/2006 16:15:44 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 5, 0, 11, size=31360 bytes, created 10/11/2006 16:16:34 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 5, 0, 11, size=10624 bytes, created 10/11/2006 16:15:56 (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
J'ai le même souci que toi avec des DVD+RW Lekium. La version de mon firmware est pourtant à jour mais je n'arrive par contre pas à activer le mode DMA. A savoir que mon graveur est sur la même nappe qu'un disque dur et que XP me detecte 2 canaux primaires et 2 canaux secondaires alors qu'il n'y a qu'un seul port IDE sur ma carte mère avec ce disque dur et mon graveur. Je ne comprend pas bien tout çà. Merci d'avance pour vos infos.
Voici le log Nero:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.29 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-111D>Version: 1.29 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3320620AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00CA JRAID Port 4 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-111D1.29 JRAID Port 4 ID 1 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 688MB (704552kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.12.2006
Compilation ISO
12:20:35 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:20:35 #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:20:35 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
12:20:35 #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
12:20:35 #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 360031 ( 80:00.31, 703MB)
12:20:35 #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
12:20:35 #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD+RW
Disc Manufacturer ID: MBIPG101, Media Type ID: W04, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
12:20:35 #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:20:35 #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 360032 (360032) = #360032/80:0.32
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 360032 blocks [D: PIONEER DVD-RW DVR-111D]
--------------------------------------------------------------
12:20:35 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [D: PIONEER DVD-RW DVR-111D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 737345536, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 360032 | 0 | 0x00
0 | 1 | 1 | 0x41 | 360032 | 0 | 0x00
360032 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:20:36 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:20:36 #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
12:20:36 #13 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
12:20:36 #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
12:20:36 #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 2.4x (3 324 Ko/s)
12:20:36 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:20:36 #17 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MBIPG101
Media type ID: W04
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............
12:20:36 #18 Phase 98 File dlgbrnst.cpp, Line 1746
Start formatting disc before burning
12:20:36 #19 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0x04 11 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 20
Buffer x06622140: Len xc
0x00 82 00 08 00 23 05 40 98 00 00 00
12:20:36 #20 Phase 101 File dlgbrnst.cpp, Line 1746
Formatting disc failed
12:20:36 #21 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
12:20:36 #22 CDR -1065 File ThreadedTransferInterface.cpp, Line 1779
Invalid command
D: PIONEER DVD-RW DVR-111D
12:20:36 #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1779
Could not perform start of Disc-at-once
12:20:36 #24 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 2.4x (3 324 Ko/s)
12:20:36 #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:20:38 #26 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
12:20:38 #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 5, 0, 11, size=102912 bytes, created 10/11/2006 16:15:44 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 5, 0, 11, size=31360 bytes, created 10/11/2006 16:16:34 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 5, 0, 11, size=10624 bytes, created 10/11/2006 16:15:56 (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- b_gaborit
- Nouveau Membre
- Messages: 5
- Enregistré le: 31 Déc 2006
par Scaramanga » 31 Déc 2006 17:16
Salut et bienvenue sur le forum de Gravure-News b_gaborit,
Pour activer le mode DMA as tu essayé les méthodes décrites dans cet article :
http://www.gravure-news.com/html/tuto/03/page01.php
Quel est le modèle /marque de ta carte mére?
Pour activer le mode DMA as tu essayé les méthodes décrites dans cet article :
http://www.gravure-news.com/html/tuto/03/page01.php
Quel est le modèle /marque de ta carte mére?
-
Scaramanga - Administrateur®
- Messages: 14171
- Enregistré le: 05 Sep 2002
par b_gaborit » 31 Déc 2006 18:12
Oui, j'ai essayé cette méthode mais je n'ai pas la possiblité de changer le Mode de transfert actif et donc lorsque je grave avec Nero le fichier log m'indique toujours que le mode DMA n'est pas actif. Je n'ai pas encore vérifier si les drivers chipset de ma carte mère (Asus P5B) ont évolués aussi peut être que je vais avoir la possiblité d'une mise à jour qui pourrait solutionner le problème. Le truc qui me semble bizarre est le fait que XP me trouve 2 canaux primaires et 2 canaux secondaires alors que j'ai sur un seul port IDE un hdd et mon graveur puis sur un port sata un hdd...
- b_gaborit
- Nouveau Membre
- Messages: 5
- Enregistré le: 31 Déc 2006
par Scaramanga » 31 Déc 2006 18:42
Ta carte est équipé d'un chispet Intel® P965.
As tu un utilitaire installé pour gérer ce chipset ?
POur forcer le DMA as essayé de suprier le port IDE dans le gestionnaire de périphérique, puis de rebooter ?
As tu un utilitaire installé pour gérer ce chipset ?
POur forcer le DMA as essayé de suprier le port IDE dans le gestionnaire de périphérique, puis de rebooter ?
-
Scaramanga - Administrateur®
- Messages: 14171
- Enregistré le: 05 Sep 2002
par b_gaborit » 02 Jan 2007 16:44
Oui j'ai déjà essayé de supprimer tous les canaux primaires et secondaires puis rebooter pour la réinstallation. Mais j'en reviens toujours au même point avec l'impossibilité de régler le Mode de transfert actif. Je vais essayer de virer le disque dur sur la même nappe que le graveur pour voir si ce n'est pas lui qui bloque les perfs.
- b_gaborit
- Nouveau Membre
- Messages: 5
- Enregistré le: 31 Déc 2006
par b_gaborit » 02 Jan 2007 19:49
J'ai trouvé la solution à mon problème. Sur les cartes mères Asus qui ont la fonction Raid, il ya un chipset de la société JMicron pour gérer cette fonctionnalité. Or le driver XP pilotant ce controleur s'installe soit en mode SATA ou IDE. Le fait de l'installer en mode SATA pose des problèmes de gestion des périphériques IDE. Aussi, dès que je l'ai réinstallé en mode IDE mon graveur fonctionne avec les DVD+RW Lekium. Voilà pour ceux qui on le même souci que moi...
- b_gaborit
- Nouveau Membre
- Messages: 5
- Enregistré le: 31 Déc 2006
16 messages
• Page 1 sur 1
-
- Publicité
Retourner vers Graveurs Pioneer
-
- Articles en relation
- Réponses
- Vus
- Dernier message
-
- DVR 111 D Résultats aléatoire en gravure DVD
par KaBlam » 10 Nov 2006 16:06 - 5 Réponses
- 2309 Vus
- Dernier message par Scaramanga
11 Nov 2006 20:53
- DVR 111 D Résultats aléatoire en gravure DVD
-
- Crossflashing du 111/d
par Scaramanga » 30 Mai 2006 10:17 - 5 Réponses
- 4637 Vus
- Dernier message par Scaramanga
16 Juil 2006 17:45
- Crossflashing du 111/d
-
- PB Pioneer PIONEER DVD-RW DVR-110/Nero/dvd r- Sony 8x, ....
par why » 25 Mar 2006 10:38
- 2 Réponses
- 1771 Vus
- Dernier message par why
25 Mar 2006 13:59
- PB Pioneer PIONEER DVD-RW DVR-110/Nero/dvd r- Sony 8x, ....
-
- probleme de gravure dvd avec graveur pioneer DVR-107D
par serenity » 08 Fév 2004 19:18 - 2 Réponses
- 1522 Vus
- Dernier message par serenity
08 Fév 2004 20:40
- probleme de gravure dvd avec graveur pioneer DVR-107D
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités
- Index du forum
- L’équipe du forum • Supprimer les cookies du forum • Heures au format UTC + 1 heure [ Heure d’été ]
Flux RSSDéveloppé par phpBB® Forum Software © phpBB Group
Traduit par phpBB-fr.com
phpBB SEO
Time : 0.071s | 17 Queries | GZIP : Off
Traduit par phpBB-fr.com
phpBB SEO
Time : 0.071s | 17 Queries | GZIP : Off