Probleme gravure dvd-rw ou dvd+rw

nada41 · Nouveau Membre Inscrit le: 04 Oct 2008 Messages: 4

Bonjour à tous, je suis toute nouvelle sur le forum et relativement novice en informatique.

j'ai un graveur lite-on dvdrw LH-18A1P ET NERO 7, j'ai toujours reussi a graver mes cd-r, cd-rw ou dvd-r mais impossible de graver des dvd-rw bien pratique pour faire des essais

je croyais que cela venais de mes dvd+rw verbatim mais là je viens d'acheter des dvd-rw premium Emtec et l'echec de gravure est désesperant se tape le front

Donc je me suis dirigée vers votre forum, je viens de mettre à jour le firmware mais malheureusement cela ne change rien du tout

je vous joinsle dernier log de l'echec de gravure

5C80001080000000005666161509

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\logiciels\nero7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 14:54:32

NT-SPTI used
Nero Version: 7.0.0.0 (Nero Express)
Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL0J - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class:
CD-ROM: <LITE-ON DVDRW LH-18A1P >Version: GL0J - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HDT725025VLA380 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-18A1P GL0J JRAID Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-18A1P E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 637MB (653088kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.10.2008
Compilation ISO
11:13:26 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:13:26 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

11:13:26 #3 Text 0 File Reader.cpp, Line 124
Reader running

11:13:26 #4 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

11:13:26 #5 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

11:13:27 #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 49151 ( 10:55.26, 95MB)

11:13:27 #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

11:13:27 #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: LITE-ON DVDRW LH-18A1P, Media type: DVD-RW
Disc Manufacturer: OPTODI - SCW004
Disc Application Code: 2, Disc Physical Code: 214

11:13:27 #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:13:27 #10 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 49152 (49152) = #49152/10:55.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 49152 blocks [E: LITE-ON DVDRW LH-18A1P]
--------------------------------------------------------------

11:13:27 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: LITE-ON DVDRW LH-18A1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 100663296, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
49152 | lead-out | 1 | 0x41 | 0x00

11:13:27 #12 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:13:27 #13 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

11:13:27 #14 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

11:13:27 #15 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

11:13:27 #16 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5 540 Ko/s)

11:13:27 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:13:27 #18 Text 0 File DVDMinusRW.cpp, Line 268
Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.

11:13:27 #19 Phase 136 File dlgbrnst.cpp, Line 1724
Quick Format DVD-RW

11:13:27 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0x04 11 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03a47600: Len xc
0x00 82 00 08 00 00 00 00 54 00 00 10

11:13:27 #21 CDR -1065 File ThreadedTransferInterface.cpp, Line 1783
Invalid command
E: LITE-ON DVDRW LH-18A1P

11:13:27 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
Could not perform start of Disc-at-once

11:13:27 #23 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5 540 Ko/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Merci d'avance pour votre aide applaudissement

Burnitall

Bonjour & bienvenue,

nada41 · Nouveau Membre Inscrit le: 04 Oct 2008 Messages: 4

merci Bunitall

par contre j'ai 2 "canal ide principal" sur le 1er je n'ai pas de mode de transfert actif et sur le 2eme je l'ai bien en ultra dma mode 5

je désinstalle les 2 ou seulement celui qui est reconnu avec la notion (car pour moi ce n'est qu'une notion Very Happy

) ultra mode 5

nada41 · Nouveau Membre Inscrit le: 04 Oct 2008 Messages: 4

excuse j'ai fourché sur ton pseudo Burnitall Prière

nada41 · Nouveau Membre Inscrit le: 04 Oct 2008 Messages: 4

J'ai désinstallé les 2 IDE et relancer le pc comme demander, nouveau materiel bien détecte mais se tape le front

j'ai la forte impression qua ça n'a strictement rien changé

n'ayant pas de réponse au précédent message je me suis baladée sur le forum où l'on parlait des cavaliers n'ayant qu'un seul graveur je suppose que je suis en maitre !!! ais-je raison ???? est-ce qu'il a pu etre mis en esclave meme s'il est tout seul ???

le log apres nouvelle gravure est le suivant :

5C80001080000000005666161509

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\logiciels\nero7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 14:54:32

NT-SPTI used
Nero Version: 7.0.0.0 (Nero Express)
Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL0J - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class:
CD-ROM: <LITE-ON DVDRW LH-18A1P >Version: GL0J - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HDT725025VLA380 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-18A1P GL0J JRAID Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-18A1P E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 638MB (654204kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.10.2008
Compilation ISO
14:20:51 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:20:51 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

14:20:51 #3 Text 0 File Reader.cpp, Line 124
Reader running

14:20:51 #4 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

14:20:51 #5 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

14:20:52 #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 341455 ( 75:52.55, 666MB)

14:20:52 #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

14:20:52 #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: LITE-ON DVDRW LH-18A1P, Media type: DVD-RW
Disc Manufacturer: OPTODI - SCW004
Disc Application Code: 2, Disc Physical Code: 214

14:20:52 #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:20:52 #10 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 341456 (341456) = #341456/75:52.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 341456 blocks [E: LITE-ON DVDRW LH-18A1P]
--------------------------------------------------------------

14:20:52 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: LITE-ON DVDRW LH-18A1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 699301888, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
341456 | lead-out | 1 | 0x41 | 0x00

14:20:52 #12 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

14:20:52 #13 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

14:20:52 #14 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

14:20:52 #15 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

14:20:52 #16 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5 540 Ko/s)

14:20:52 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:20:52 #18 Text 0 File DVDMinusRW.cpp, Line 268
Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.

14:20:52 #19 Phase 136 File dlgbrnst.cpp, Line 1724
Quick Format DVD-RW

14:20:52 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0x04 11 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03a47600: Len xc
0x00 82 00 08 00 00 00 00 54 00 00 10

14:20:52 #21 CDR -1065 File ThreadedTransferInterface.cpp, Line 1783
Invalid command
E: LITE-ON DVDRW LH-18A1P

14:20:52 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
Could not perform start of Disc-at-once

14:20:52 #23 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5 540 Ko/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Burnitall · Posté le: 04 Oct 2008 17:20 Sujet du message:

DMA toujours en "off" se tape le front

Pour les infos raccordements lire et appliquer ceci :
http://www.gravure-news.com/html/tuto/18/page01.php

Tu as Nero 7.0.0.0, la dernière version 7 à jour est dispo ici :
http://www.gravure-news.com/html/download/201.php

Plus généralement, vérifier si tu n'utilises pas des disques Hi Speed, désinstaller d'éventuels lecteurs virtuels, vérifier que les pilotes de ta carte mère soient à jour ou encore essayer de tester ce graveur sur un autre PC si tu en as la possibilité. Wink