Bonjour à tous, je suis nouveau sur ce forum, mais je suis déjà venu par l'intermédiaire de google et cela m'a aidé à résoudre des problèmes (et je vous en remercie tous autant que vous êtes).
Voilà mon problème : j'ai donc un graveur shw-1635s (lite-on) et j'ai des dvd +r de la marque think xtra je crois, le problème c'est que mon graveur ne réussit pas à les graver, je tiens à préciser qu'avant j'avais des dvd -r de la même marque et aucun problème. J'explique un peu, la mémoire tampon va jusqu'à 100% et la gravure jusuqu'à 1%, en fait on entend le dvd tourner de + en + vite jusqu'à entendre un bruit bizarre, à ce moment-là il s'arrête de tourner et ensuite rebelote... puis gravure échoué. Et cela m'ennuie beaucoup.
Petites précisions, j'ai xp familial, je grave avec nero, et j'ai le dernier firmware pour le graveur (j'ai testé la gravure avant de mettre ce dernier firmware, mais rien n'y change). J'ai enregistré le rapport d'erreurs que je mettrai ici si nécessaire. Merci d'avance à vous et soit dit en passant excellent forum.
problème de gravure de dvd+r avec shw-1635s
7 messages
• Page 1 sur 1
problème de gravure de dvd+r avec shw-1635s
par nico666 » 03 Oct 2006 17:55
- nico666
- Nouveau Membre
- Messages: 5
- Enregistré le: 03 Oct 2006
par Scaramanga » 03 Oct 2006 18:22
Salut et bienvenue sur le forum de Gravure-News,
Peux tu nouc coller le fichier Log de Nero ?
Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.
En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:Program fileAheadNero, il se nomne NeroHistoryLog . On peut le visualier avec un éditeur de texte , bloc note de windows par exemple.
Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log.
tu peux le coller entre les balise [ code ] et [ /code ].
Peux tu nouc coller le fichier Log de Nero ?
Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.
En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:Program fileAheadNero, il se nomne NeroHistoryLog . On peut le visualier avec un éditeur de texte , bloc note de windows par exemple.
Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log.
tu peux le coller entre les balise [ code ] et [ /code ].
-
Scaramanga - Administrateur®
- Messages: 14171
- Enregistré le: 05 Sep 2002
par nico666 » 03 Oct 2006 19:16
euh...désolé, mais 2 choses : faut-il que je colle nerohistorylog ou bien seulement le rapport d'erreur fait par nero ? et que dois-je mettre entre les balises
- Code: Tout sélectionner
et
- nico666
- Nouveau Membre
- Messages: 5
- Enregistré le: 03 Oct 2006
par nico666 » 03 Oct 2006 20:44
ok voilà donc le nerohistorylog :
[code]
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 222MB (227680kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.9.2006
Compilation ISO
19:34:26 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:34:26 #2 Text 0 File Reader.cpp, Line 127
Reader running
19:34:26 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
19:34:26 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
19:34:26 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
19:34:29 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 361551 ( 80:20.51, 706MB)
19:34:29 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
19:34:29 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
19:34:29 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:34:29 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 361552 (361552) = #361552/80:20.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 361552 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
19:34:29 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 740458496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
361552 | lead-out | 1 | 0x41 | 0x00
19:34:29 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:34:29 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
19:34:29 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:34:29 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)
19:34:29 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:34:29 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 24B1EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............
19:34:29 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
19:37:38 #19 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 361552 (58450h), lenght 0 blocks
19:37:38 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:37:39 #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)
19:37:39 #22 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
19:40:17 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:40:17 #24 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 322MB (330144kB)
Memory in use : 36
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.9.2006
Compilation ISO
20:12:52 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:12:52 #2 Text 0 File Reader.cpp, Line 127
Reader running
20:12:52 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
20:12:52 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
20:12:53 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
20:12:53 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1079887 (239:58.37, 2109MB)
20:12:53 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
20:12:53 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
20:12:53 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:12:53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1079888 (1079888) = #1079888/239:58.38
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1079888 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
20:12:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2211610624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1079888 | lead-out | 1 | 0x41 | 0x00
20:12:53 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
20:12:54 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
20:12:54 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
20:12:54 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)
20:12:54 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:12:54 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 24B1EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............
20:12:54 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
20:21:15 #19 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 1079888 (107A50h), lenght 0 blocks
20:21:16 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:21:18 #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)
20:21:20 #22 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
20:28:11 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:28:12 #24 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 313MB (321112kB)
Memory in use : 38
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.9.2006
Compilation ISO
19:00:05 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:00:06 #2 Text 0 File Reader.cpp, Line 127
Reader running
19:00:06 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
19:00:06 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
19:00:06 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
19:00:09 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2171119 (482:28.19, 4240MB)
19:00:09 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
19:00:09 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: PHILIPS, Media Type ID: 041, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
19:00:09 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:00:09 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2171120 (2171120) = #2171120/482:28.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2171120 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
19:00:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4446453760, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2171120 | lead-out | 1 | 0x41 | 0x00
19:00:10 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:00:10 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
19:00:10 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:00:10 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)
19:00:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:00:10 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 23C21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
19:00:10 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
19:17:04 #19 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 2171120 (2120F0h), lenght 0 blocks
19:17:04 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:17:06 #21 Text 0 File DVDPlusRW.cpp, Line 870
Media-Format will be stopped after burning
19:17:06 #22 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
19:17:24 #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)
19:17:24 #24 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
19:19:02 #25 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03950200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x01 0x08 0xF0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
19:19:12 #26 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03950200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x01 0x09 0xC0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
19:19:12 #27 SectorVerify 20 File Cdrdrv.cpp, Line 9470
Read errors from sector 67824 to 67839
19:19:21 #28 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03950200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x01 0x09 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
19:19:21 #29 SectorVerify 20 File Cdrdrv.cpp, Line 9470
Read errors from sector 68032 to 68047
19:19:32 #30 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03950200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x01 0x0A 0x20 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
19:19:32 #31 SectorVerify 20 File Cdrdrv.cpp, Line 9470
Read errors from sector 68064 to 68079
19:19:41 #32 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03950200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x01 0x0A 0x40 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
19:19:41 #33 SectorVerify 20 File Cdrdrv.cpp, Line 9470
Read errors from sector 68128 to 68143
19:19:46 #34 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 220MB (225320kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.9.2006
Compilation ISO
19:24:45 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:24:45 #2 Text 0 File Reader.cpp, Line 127
Reader running
19:24:45 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
19:24:45 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
19:24:45 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
19:24:48 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2171119 (482:28.19, 4240MB)
19:24:48 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
19:24:48 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: PHILIPS, Media Type ID: 041, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
19:24:48 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:24:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2171120 (2171120) = #2171120/482:28.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2171120 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
19:24:48 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4446453760, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2171120 | lead-out | 1 | 0x41 | 0x00
19:24:49 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:24:49 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
19:24:49 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:24:49 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)
19:24:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:24:49 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 2420EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
19:24:49 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
19:42:56 #19 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 2171120 (2120F0h), lenght 0 blocks
19:42:57 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:42:58 #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
LEHAUT
1A20-0218-0370-2363-8674-1140*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 4 TA 0 - 6.6.0.13
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
VK8335F JOI220H F: CDRom2
LITE-ON DVDRW SHW-1635S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 222MB (227716kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.9.2006
Compilation ISO
19:46:34 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:46:34 #2 Text 0 File Reader.cpp, Line 127
Reader running
19:46:34 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
19:46:34 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
19:46:34 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
19:46:39 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 361551 ( 80:20.51, 706MB)
19:46:39 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
19:46:39 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
19:46:39 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:46:39 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 361552 (361552) = #361552/80:20.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 361552 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
19:46:39 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 740458496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
361552 | lead-out | 1 | 0x41 | 0x00
19:46:39 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:46:39 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
19:46:39 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:46:39 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)
19:46:39 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:46:39 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 2522EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: INFODISC
Media type ID: A10
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39 ...INFODISCA10.9
23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
19:46:39 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
19:49:31 #19 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 361552 (58450h), lenght 0 blocks
19:49:31 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:49:33 #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)
19:49:33 #22 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
19:52:14 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:52:14 #24 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 77MB (79360kB)
Memory in use : 84
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.10.2006
Compilation ISO
12:17:20 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:17:20 #2 Text 0 File Reader.cpp, Line 127
Reader running
12:17:20 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
12:17:20 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
12:17:20 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
12:17:22 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2152527 (478:20.27, 4204MB)
12:17:22 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
12:17:22 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12:17:22 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:17:22 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2152528 (2152528) = #2152528/478:20.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152528 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
12:17:22 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4408377344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2152528 | lead-out | 1 | 0x41 | 0x00
12:17:23 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:17:23 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
12:17:23 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:17:23 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11 080 Ko/s)
12:17:23 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:17:23 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:17:23 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
12:18:33 #19 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x039C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
12:18:33 #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error
12:18:34 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:18:34 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:18:34 #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12:18:34 #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
12:18:34 #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11 080 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 94MB (96680kB)
Memory in use : 81
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.10.2006
Compilation ISO
12:20:07 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:20:07 #2 Text 0 File Reader.cpp, Line 127
Reader running
12:20:07 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
12:20:07 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
12:20:07 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
12:20:07 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2152527 (478:20.27, 4204MB)
12:20:07 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
12:20:07 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12:20:07 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:20:07 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2152528 (2152528) = #2152528/478:20.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152528 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
12:20:07 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4408377344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2152528 | lead-out | 1 | 0x41 | 0x00
12:20:07 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:20:07 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
12:20:07 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:20:07 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11 080 Ko/s)
12:20:08 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:20:08 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:20:08 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
12:21:12 #19 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03E10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
12:21:12 #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error
12:21:12 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:21:12 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:21:12 #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12:21:12 #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
12:21:12 #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11 080 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 114MB (117120kB)
Memory in use : 77
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.10.2006
Compilation ISO
12:23:18 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write
[code]
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 222MB (227680kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.9.2006
Compilation ISO
19:34:26 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:34:26 #2 Text 0 File Reader.cpp, Line 127
Reader running
19:34:26 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
19:34:26 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
19:34:26 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
19:34:29 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 361551 ( 80:20.51, 706MB)
19:34:29 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
19:34:29 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
19:34:29 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:34:29 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 361552 (361552) = #361552/80:20.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 361552 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
19:34:29 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 740458496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
361552 | lead-out | 1 | 0x41 | 0x00
19:34:29 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:34:29 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
19:34:29 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:34:29 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)
19:34:29 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:34:29 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 24B1EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............
19:34:29 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
19:37:38 #19 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 361552 (58450h), lenght 0 blocks
19:37:38 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:37:39 #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)
19:37:39 #22 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
19:40:17 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:40:17 #24 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 322MB (330144kB)
Memory in use : 36
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.9.2006
Compilation ISO
20:12:52 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:12:52 #2 Text 0 File Reader.cpp, Line 127
Reader running
20:12:52 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
20:12:52 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
20:12:53 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
20:12:53 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1079887 (239:58.37, 2109MB)
20:12:53 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
20:12:53 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
20:12:53 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:12:53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1079888 (1079888) = #1079888/239:58.38
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1079888 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
20:12:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2211610624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1079888 | lead-out | 1 | 0x41 | 0x00
20:12:53 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
20:12:54 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
20:12:54 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
20:12:54 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)
20:12:54 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:12:54 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 24B1EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............
20:12:54 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
20:21:15 #19 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 1079888 (107A50h), lenght 0 blocks
20:21:16 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:21:18 #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)
20:21:20 #22 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
20:28:11 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:28:12 #24 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 313MB (321112kB)
Memory in use : 38
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.9.2006
Compilation ISO
19:00:05 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:00:06 #2 Text 0 File Reader.cpp, Line 127
Reader running
19:00:06 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
19:00:06 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
19:00:06 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
19:00:09 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2171119 (482:28.19, 4240MB)
19:00:09 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
19:00:09 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: PHILIPS, Media Type ID: 041, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
19:00:09 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:00:09 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2171120 (2171120) = #2171120/482:28.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2171120 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
19:00:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4446453760, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2171120 | lead-out | 1 | 0x41 | 0x00
19:00:10 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:00:10 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
19:00:10 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:00:10 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)
19:00:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:00:10 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 23C21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
19:00:10 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
19:17:04 #19 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 2171120 (2120F0h), lenght 0 blocks
19:17:04 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:17:06 #21 Text 0 File DVDPlusRW.cpp, Line 870
Media-Format will be stopped after burning
19:17:06 #22 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
19:17:24 #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)
19:17:24 #24 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
19:19:02 #25 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03950200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x01 0x08 0xF0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
19:19:12 #26 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03950200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x01 0x09 0xC0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
19:19:12 #27 SectorVerify 20 File Cdrdrv.cpp, Line 9470
Read errors from sector 67824 to 67839
19:19:21 #28 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03950200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x01 0x09 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
19:19:21 #29 SectorVerify 20 File Cdrdrv.cpp, Line 9470
Read errors from sector 68032 to 68047
19:19:32 #30 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03950200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x01 0x0A 0x20 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
19:19:32 #31 SectorVerify 20 File Cdrdrv.cpp, Line 9470
Read errors from sector 68064 to 68079
19:19:41 #32 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03950200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x01 0x0A 0x40 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
19:19:41 #33 SectorVerify 20 File Cdrdrv.cpp, Line 9470
Read errors from sector 68128 to 68143
19:19:46 #34 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 220MB (225320kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.9.2006
Compilation ISO
19:24:45 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:24:45 #2 Text 0 File Reader.cpp, Line 127
Reader running
19:24:45 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
19:24:45 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
19:24:45 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
19:24:48 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2171119 (482:28.19, 4240MB)
19:24:48 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
19:24:48 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: PHILIPS, Media Type ID: 041, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
19:24:48 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:24:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2171120 (2171120) = #2171120/482:28.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2171120 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
19:24:48 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4446453760, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2171120 | lead-out | 1 | 0x41 | 0x00
19:24:49 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:24:49 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
19:24:49 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:24:49 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)
19:24:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:24:49 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 2420EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
19:24:49 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
19:42:56 #19 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 2171120 (2120F0h), lenght 0 blocks
19:42:57 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:42:58 #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
LEHAUT
1A20-0218-0370-2363-8674-1140*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 4 TA 0 - 6.6.0.13
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
VK8335F JOI220H F: CDRom2
LITE-ON DVDRW SHW-1635S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 222MB (227716kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.9.2006
Compilation ISO
19:46:34 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:46:34 #2 Text 0 File Reader.cpp, Line 127
Reader running
19:46:34 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
19:46:34 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
19:46:34 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
19:46:39 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 361551 ( 80:20.51, 706MB)
19:46:39 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
19:46:39 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
19:46:39 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:46:39 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 361552 (361552) = #361552/80:20.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 361552 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
19:46:39 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 740458496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
361552 | lead-out | 1 | 0x41 | 0x00
19:46:39 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:46:39 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
19:46:39 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:46:39 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)
19:46:39 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:46:39 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 2522EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: INFODISC
Media type ID: A10
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39 ...INFODISCA10.9
23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
19:46:39 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
19:49:31 #19 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 361552 (58450h), lenght 0 blocks
19:49:31 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:49:33 #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)
19:49:33 #22 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
19:52:14 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:52:14 #24 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 77MB (79360kB)
Memory in use : 84
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.10.2006
Compilation ISO
12:17:20 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:17:20 #2 Text 0 File Reader.cpp, Line 127
Reader running
12:17:20 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
12:17:20 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
12:17:20 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
12:17:22 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2152527 (478:20.27, 4204MB)
12:17:22 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
12:17:22 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12:17:22 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:17:22 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2152528 (2152528) = #2152528/478:20.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152528 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
12:17:22 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4408377344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2152528 | lead-out | 1 | 0x41 | 0x00
12:17:23 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:17:23 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
12:17:23 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:17:23 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11 080 Ko/s)
12:17:23 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:17:23 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:17:23 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
12:18:33 #19 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x039C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
12:18:33 #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error
12:18:34 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:18:34 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:18:34 #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12:18:34 #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
12:18:34 #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11 080 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 94MB (96680kB)
Memory in use : 81
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.10.2006
Compilation ISO
12:20:07 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:20:07 #2 Text 0 File Reader.cpp, Line 127
Reader running
12:20:07 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
12:20:07 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
12:20:07 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
12:20:07 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2152527 (478:20.27, 4204MB)
12:20:07 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
12:20:07 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12:20:07 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:20:07 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2152528 (2152528) = #2152528/478:20.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152528 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
12:20:07 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4408377344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2152528 | lead-out | 1 | 0x41 | 0x00
12:20:07 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:20:07 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
12:20:07 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:20:07 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11 080 Ko/s)
12:20:08 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:20:08 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:20:08 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
12:21:12 #19 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03E10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
12:21:12 #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error
12:21:12 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:21:12 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:21:12 #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12:21:12 #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
12:21:12 #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11 080 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0B - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom1
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 114MB (117120kB)
Memory in use : 77
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.10.2006
Compilation ISO
12:23:18 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write
- nico666
- Nouveau Membre
- Messages: 5
- Enregistré le: 03 Oct 2006
par nico666 » 03 Oct 2006 21:01
ben ça fait 2 fois que j'essaye, mais les balises n'ont fonctionné que dans la prévisualisation (avec fonction agrandir) donc je mets la suite:
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:52:21 #2 Text 0 File Reader.cpp, Line 127
Reader running
12:52:21 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
12:52:21 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
12:52:21 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
12:52:22 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2152527 (478:20.27, 4204MB)
12:52:22 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
12:52:22 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
12:52:22 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:52:22 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2152528 (2152528) = #2152528/478:20.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152528 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
12:52:22 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4408377344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2152528 | lead-out | 1 | 0x41 | 0x00
12:52:22 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:52:22 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
12:52:22 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:52:22 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11 080 Ko/s)
12:52:22 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:52:22 #17 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
12:52:22 #18 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
12:52:22 #19 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
12:52:22 #20 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:53:05 #21 Text 0 File Cdrdrv.cpp, Line 1288
12:53:05.589 - LITE-ON DVDRW SHW-1635S\H1 T1 : Queue again later
13:10:29 #22 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 2152528 (20D850h), lenght 0 blocks
13:10:30 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:10:31 #24 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 2152527
13:10:49 #25 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11 080 Ko/s)
13:10:50 #26 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
13:22:43 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:22:43 #28 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0Z - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom4
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 136MB (139476kB)
Memory in use : 73
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.10.2006
Compilation ISO
17:36:56 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
17:36:56 #2 Text 0 File Reader.cpp, Line 127
Reader running
17:36:56 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
17:36:56 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
17:36:56 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
17:36:57 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2140143 (475:35.18, 4179MB)
17:36:57 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
17:36:57 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
17:36:57 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:36:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2140144 (2140144) = #2140144/475:35.19
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2140144 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
17:36:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4383014912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2140144 | lead-out | 1 | 0x41 | 0x00
17:36:57 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
17:36:57 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
17:36:57 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
17:36:57 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11 080 Ko/s)
17:36:57 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:36:58 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
17:36:58 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
17:38:06 #19 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B380000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
17:38:06 #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error
17:38:06 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
17:38:06 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
17:38:06 #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
17:38:06 #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
17:38:06 #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11 080 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Voilà. Je tiens à dire quelque chose : comme le graveur ne voulait pas graver les dvd+r, me suis dit que quelque chose était peut-être pas à jour, et ce quelque chose était le firmware que j'ai fait passer de ysob à ysoz, et après (j'ai fait ça cet après-midi) impossible d'effacer les dvdrw et gravage n'importe comment qui fait qu'on ne peut pas lire le dvd nul part. Bref la mise à jour du firmware n'a fait que détraquer mon graveur, j'ai pensé à la restauration du système après avoir tapé je ne sais combien de fois sur l'armoire à côté du pc, et depuis ça remarche comme avant.
Merci d'avance pour mon problème avec les dvd+r
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:52:21 #2 Text 0 File Reader.cpp, Line 127
Reader running
12:52:21 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
12:52:21 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
12:52:21 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
12:52:22 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2152527 (478:20.27, 4204MB)
12:52:22 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
12:52:22 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
12:52:22 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:52:22 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2152528 (2152528) = #2152528/478:20.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152528 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
12:52:22 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4408377344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2152528 | lead-out | 1 | 0x41 | 0x00
12:52:22 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:52:22 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
12:52:22 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:52:22 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11 080 Ko/s)
12:52:22 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:52:22 #17 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
12:52:22 #18 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
12:52:22 #19 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
12:52:22 #20 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:53:05 #21 Text 0 File Cdrdrv.cpp, Line 1288
12:53:05.589 - LITE-ON DVDRW SHW-1635S\H1 T1 : Queue again later
13:10:29 #22 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-1635S > start writing Lead-Out at LBA 2152528 (20D850h), lenght 0 blocks
13:10:30 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:10:31 #24 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 2152527
13:10:49 #25 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11 080 Ko/s)
13:10:50 #26 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
13:22:43 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:22:43 #28 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0Z - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < ATAPI DVDROM 16X>Version: 100K - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600LB-55EDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVDROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : VK8335F JOI220H 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVDROM 16X D: CDRom0
LITE-ON DVDRW SHW-1635S E: CDRom4
VK8335F JOI220H F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 136MB (139476kB)
Memory in use : 73
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.10.2006
Compilation ISO
17:36:56 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
17:36:56 #2 Text 0 File Reader.cpp, Line 127
Reader running
17:36:56 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
17:36:56 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
17:36:56 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
17:36:57 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2140143 (475:35.18, 4179MB)
17:36:57 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
17:36:57 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
17:36:57 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:36:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2140144 (2140144) = #2140144/475:35.19
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2140144 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
17:36:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4383014912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2140144 | lead-out | 1 | 0x41 | 0x00
17:36:57 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
17:36:57 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
17:36:57 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
17:36:57 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11 080 Ko/s)
17:36:57 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:36:58 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
17:36:58 #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
17:38:06 #19 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B380000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
17:38:06 #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error
17:38:06 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
17:38:06 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
17:38:06 #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
17:38:06 #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
17:38:06 #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11 080 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 14:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Voilà. Je tiens à dire quelque chose : comme le graveur ne voulait pas graver les dvd+r, me suis dit que quelque chose était peut-être pas à jour, et ce quelque chose était le firmware que j'ai fait passer de ysob à ysoz, et après (j'ai fait ça cet après-midi) impossible d'effacer les dvdrw et gravage n'importe comment qui fait qu'on ne peut pas lire le dvd nul part. Bref la mise à jour du firmware n'a fait que détraquer mon graveur, j'ai pensé à la restauration du système après avoir tapé je ne sais combien de fois sur l'armoire à côté du pc, et depuis ça remarche comme avant.
Merci d'avance pour mon problème avec les dvd+r
- nico666
- Nouveau Membre
- Messages: 5
- Enregistré le: 03 Oct 2006
Re: problème de gravure de dvd+r avec shw-1635s
par Burnitall » 03 Oct 2006 22:36
nico666 a écrit: je tiens à préciser qu'avant j'avais des dvd -r de la même marque et aucun problème.
Avant quoi ? avant mise à jour ? ou tu as modifié quelque chose ?
nico666 a écrit: je grave avec nero, et j'ai le dernier firmware pour le graveur ...
Le dernier firmware pour ton graveur est le YS0Z
Nero 6 n'est pas à jour, tu as la version 6.6.0.13 la dernière étant la 6.6.1.4.
A priori DMA ok, vérifie peut être dans Nero InfoTool que tes aspi sont bien en etat de fonctionner.
Edit : apparement tu as posté des log différents (différence de firmware !)
-
Burnitall - Enfoiré
- Messages: 3054
- Enregistré le: 19 Juil 2004
- Localisation: Strasbourg
par nico666 » 04 Oct 2006 16:28
quand je disais avant, c'était avant que je n'utilise des dvd+r, parce qu'en fait j'en ai plus du tout des dvd-r, et ouais j'ai changé le firmware hier-aprèsmidi pour voir si des fois cela me permettrait de graver sur des dvd+r, mais au lieu d'améliorer le graveur, ça n'a fait que le déteriorer, et j'ai donc fait une restauration du système a y a deux jours et cela refonctionne correctement, hormis les dvd+r qui ne veulent toujours pas se faire graver.
Concernant nero qui n'est pas à jour, cela va-t-il influencer sur le fait que je ne puisse pas graver de dvd+r ???
Et sans vouloir paraitre ignorant (bien que cela le fasse) que sont les aspi ??
merci d'avance
Concernant nero qui n'est pas à jour, cela va-t-il influencer sur le fait que je ne puisse pas graver de dvd+r ???
Et sans vouloir paraitre ignorant (bien que cela le fasse) que sont les aspi ??
merci d'avance
- nico666
- Nouveau Membre
- Messages: 5
- Enregistré le: 03 Oct 2006
7 messages
• Page 1 sur 1
-
- Publicité
Retourner vers Graveurs Lite-On
-
- Articles en relation
- Réponses
- Vus
- Dernier message
-
- [SHW-1635S] Echec de Gravure - Mémoire Tampon Folle !
par misterneno » 09 Déc 2005 19:27 - 9 Réponses
- 1471 Vus
- Dernier message par Scaramanga
10 Déc 2005 18:51
- [SHW-1635S] Echec de Gravure - Mémoire Tampon Folle !
-
- Soucis de gravure - lecteur LITE ON SHW 1635S
par jown29 » 16 Nov 2006 11:05 - 1 Réponses
- 1710 Vus
- Dernier message par Scaramanga
17 Nov 2006 8:24
- Soucis de gravure - lecteur LITE ON SHW 1635S
-
- Problème gravure DVd double couche sur Liteon SHW-160
par hammett34 » 15 Fév 2007 17:26 - 2 Réponses
- 5078 Vus
- Dernier message par hammett34
16 Fév 2007 12:15
- Problème gravure DVd double couche sur Liteon SHW-160
-
- vitesse de gravure liteon 1635s
par bahamut-001 » 26 Sep 2006 11:34 - 1 Réponses
- 1453 Vus
- Dernier message par bahamut-001
27 Sep 2006 13:17
- vitesse de gravure liteon 1635s
-
- Led rouge pendant la gravure - SHW-16H5S
par williams » 05 Nov 2005 16:58
- 7 Réponses
- 1482 Vus
- Dernier message par williams
06 Nov 2005 12:14
- Led rouge pendant la gravure - SHW-16H5S
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités
- Index du forum
- L’équipe du forum • Supprimer les cookies du forum • Heures au format UTC + 1 heure [ Heure d’été ]
Flux RSSDéveloppé par phpBB® Forum Software © phpBB Group
Traduit par phpBB-fr.com
phpBB SEO
Time : 0.073s | 17 Queries | GZIP : Off
Traduit par phpBB-fr.com
phpBB SEO
Time : 0.073s | 17 Queries | GZIP : Off