Commande scsi interrompue DVR 212

Forum de support des graveurs et périphériques Pioneer.

Commande scsi interrompue DVR 212

Messagepar macnabis » 03 Fév 2008 16:17

Bonjour à tous,

je suis dans une impasse car toutes mes gravures échouent sous Nero, EasyCd, etc... car j'ai toujours l'erreur de chaîne SCSI

Je vous montre le log de Nero, en espérant qu'une âme charritable prendra 5 minutes pour m'aideer, merci par avance
Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0

Recorder: <PIONEER DVD-RW DVR-212> Version: 1.24 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default
CD-ROM: <HP PhotoSmart DVD >Version: NU01 - HA 1 TA 1 - 8.1.1.0
Adapter driver: <USB 2.0> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD5000AAJB-00UHA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y120P0 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HP PhotoSmart DVD L: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096364kB)
Free physical memory: 1630MB (1670116kB)
Memory in use : 20 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.2.2008
Graver une image DVD
00:48:53 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

00:48:53 #2 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

00:48:53 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2278449 (506:19.24, 4450MB)

00:48:53 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

00:48:53 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: PIONEER DVD-RW DVR-212, Media type: DVD-R
Disc Manufacturer ID: <DAXON0> <16S>
Disc Application Code: 64, Disc Physical Code: 193

00:48:53 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

00:48:53 #7 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2278450 (2278450) = #2278450/506:19.25
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278450 blocks [D: PIONEER DVD-RW DVR-212]
--------------------------------------------------------------

00:48:53 #8 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [D: PIONEER DVD-RW DVR-212] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4666265600, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2278450 | 2278450 | 0x00
2278450 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

00:48:53 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

00:48:53 #10 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

00:48:53 #11 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

00:48:53 #12 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

00:48:53 #13 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

00:48:53 #14 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 4x (5 540 Ko/s)

00:48:53 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

00:48:53 #16 Text 0 File DVDR.cpp, Line 3245
Recording mode: Sequential Recording Mode

00:48:53 #17 Text 0 File DVDR.cpp, Line 3401
Start write address at LBA 0
DVD high compatibility mode: Yes

00:48:53 #18 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x04d0ad80: Len x648

00:48:53 #19 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 84 0E 10 87 88 80 00 .@....R.........
03 44 41 58 4F 4E 30 00 - 04 31 36 53 00 00 00 00 .DAXON0..16S....
05 88 80 00 00 00 01 00 - 06 09 0B 12 A8 88 90 00 ................
07 88 80 00 00 00 00 00 - 08 06 13 0A 0E 08 04 00 ................
09 96 06 0C 0B 70 88 00 - 0A 80 00 00 00 00 10 00 .....p..........
0B 08 18 17 B8 88 85 00 - 0C B6 79 0B B0 33 03 00 ..........y..3..
0D 30 00 D0 00 00 00 00 - 0E 0A 20 3B 37 29 1E 00 .0.........;7)..
0F 50 1D 2B 15 AA B5 00 - 10 88 80 00 00 00 00 00 .P.+............
11 00 00 00 00 00 00 00 - 12 0A 2D 39 35 2B 1D 00 ..........-95+..
13 50 1F 2D 19 98 B5 00 - 14 88 80 00 00 00 00 00 .P.-............
15 00 00 00 00 00 00 00 - 16 09 3A 45 40 2E 27 00 ..........:E@.'.
17 80 21 2E 1F 78 B5 00 - 18 88 8C 00 0C 00 0C 00 ..!..x..........
19 00 00 00 00 00 00 00 - 1A 09 4F 47 46 38 26 00 ..........OGF8&.
1B 70 21 2D 1B 67 C5 00 - 1C 88 84 00 04 00 04 00 .p!-.g..........
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00:48:53 #20 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

00:49:32 #21 SPTI -500 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x00) WinError(1617) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x07841e00: Len xc

00:49:32 #22 SPTI -500 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x07bb0680: Len x10000
0x00 00 01 BA 44 00 25 3B 25 57 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 79 06 7B AF E1 72 A5 C4 7B
0xEC C7 88 B5 A3 CE 96 64 A8 08 5C 41 1C 23 78 E9

00:49:32 #23 SPTI -500 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0784cb80: Len x10000
0x00 00 01 BA 44 00 25 3B 25 57 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 79 06 7B AF E1 72 A5 C4 7B
0xEC C7 88 B5 A3 CE 96 64 A8 08 5C 41 1C 23 78 E9

00:49:32 #24 Text 0 File MMC.cpp, Line 20166
Writer-Buffer for 㩄倠佉䕎剅䐠䑖刭⁗䐠剖㈭㈱ reduced to 32768Bytes

00:49:32 #25 SPTI -500 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 20 00 00 10 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0784cb80: Len x8000
0x00 00 01 BA 44 00 25 3B 25 57 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 79 06 7B AF E1 72 A5 C4 7B
0xEC C7 88 B5 A3 CE 96 64 A8 08 5C 41 1C 23 78 E9

00:49:32 #26 CDR -500 File Writer.cpp, Line 306
SCSI command aborted
D: PIONEER DVD-RW DVR-212

00:49:32 #27 SPTI -500 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04d0b140: Len x48

00:49:33 #28 SPTI -500 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x07841500: Len x48

00:49:33 #29 Text 0 File DVDR.cpp, Line 3803
EndDAO: Last written address was 799 (31Fh)

00:49:33 #30 CDR -500 File WriterStatus.cpp, Line 162
SCSI command aborted
D: PIONEER DVD-RW DVR-212

00:49:33 #31 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

00:49:33 #32 SPTI -500 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0784b640: Len x48

00:49:34 #33 SPTI -500 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0784bdc0: Len x48

00:49:34 #34 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 4x (5 540 Ko/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
macnabis
Nouveau Membre
 
Messages: 4
Enregistré le: 03 Fév 2008

Messagepar Scaramanga » 03 Fév 2008 17:15

Salut et bienvenue sur le forum de Gravure-News,

Ca plante quelque que soit les données et le type de support ?

As tu les dernier pilote de disponible pour le chispset de ta carte mère ?
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14178
Enregistré le: 05 Sep 2002

Messagepar macnabis » 03 Fév 2008 17:48

Merci pour ton acceuil :D

pour te répondre, cela plante à chaque DVD , et 1 fois sur 2 pour les CD.

Pour les pilotes, oui, j'ai suivi tous les conseils des forums afin d'etre impeccable au niveau pilotes.

Pour les logiciels de gravure, Nero, Easycd, Cd burner, même résultat.

Et pour finir, cela est valable pour mes 2 graveurs, (sachant que j'ai reçu le pioneer, croyant que l'autre était HS..)

De plus j'ai un graveur en USB2 qui marche nickel ! (donc ça vient pas des supports)

Je ne sais plus quoi faire :praise:
macnabis
Nouveau Membre
 
Messages: 4
Enregistré le: 03 Fév 2008

Messagepar Scaramanga » 03 Fév 2008 18:04

Tu peux déjà mettre à jour ta version de NERO >>> 8.2.8.0
http://www.gravure-news.com/download/109.php

Tu peux tester ton graveur sur un autre PC , cela permettra à coup sur de déterminer si le Pb est dû au graveur ou au PC. Dans ce dernier cas, il faut creuser du coté de pilote chipset et bios....
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14178
Enregistré le: 05 Sep 2002

Messagepar macnabis » 04 Fév 2008 13:56

Nero mis à jour,

Graveur testé sur un autre PC, ok !

Bios et pilotes derniers en date, pas d'incompatibilités relevées sur les forums....
macnabis
Nouveau Membre
 
Messages: 4
Enregistré le: 03 Fév 2008

Messagepar Scaramanga » 04 Fév 2008 18:16

C'est quoi ta CM ?
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14178
Enregistré le: 05 Sep 2002

Messagepar macnabis » 09 Mar 2008 1:24

Scaramanga a écrit:C'est quoi ta CM ?


ASROCK DUAL VSTA et ensuite Gigabte DS3

Mais ça y est ! J'ai réussi ! Cela s'appelle un FORMATAGE, car ayant réussi à graver sur un autre PC,je ne voyais que cette solution.

Donc pas de solution trouvée, hormis le radical formatage :roll: .

Je tenais à remercier les personnes (ainsi que le forum) qui ont essayé, avec toute leur bonne volonté de m'aider, à bientôt peut etre? :D
macnabis
Nouveau Membre
 
Messages: 4
Enregistré le: 03 Fév 2008



  • Publicité

Retourner vers Graveurs Pioneer

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités

cron