Petit soucis lors de la copie d'un CD avec Nero 6.6.0.18:
- echec de gravure à environ 95%
- echec de simulation à la fin (quasiment 100%)
Graveur DVD Plextor PX716A firmware 1.08
Les DMA sont activés, les ASPI 4.60 installés et pas d'autres logiciels de gravure installé (à part Alcohol, mais désactivé), et la gravure sous XP est désactivée
Hier soir j'ai pu gravé plusieurs DVD sans problème mais impossible de graver des CD
La config est neuve, l'install de XP propre, je comprend pas.
Voici le log de Nero:
- Code: Tout sélectionner
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PLEXTOR DVDR PX-716A >Version: 1.08 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD740GD-00FLC0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120M0 atapi Port 3 ID 0 DMA: On
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 6 ID 31 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 595MB (610224kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.12.2005
===== Disc-Copy over image - 1st step : Copy to image ...
11:43:57 #1 Text 0 File Reader.cpp, Line 127
Reader running
11:43:57 #2 Phase 48 File dlgbrnst.cpp, Line 1832
Analyzing disc
11:43:57 #3 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
11:43:57 #4 CDCOPY -1 File CDCopy.cpp, Line 1912
The CD is copyrighted
11:43:57 #5 Text 0 File CDCopy.cpp, Line 2128
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 359251 359250 ( 79:52.00)
11:43:57 #6 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 359251 = 359251, data (TRM_DATA_MODE1, block size 2048)
11:43:57 #7 Text 0 File Burncd.cpp, Line 3233
Turn on UltraRaw 96-Mode, using CD-R/RW media
11:43:57 #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 445499 ( 99:01.74)
Last address to be written: 359250 ( 79:52.00)
11:43:57 #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
11:43:57 #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:43:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Données (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 359251 (359251) = #359251/79:50.1
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 359251 blocks [Image Recorder]
--------------------------------------------------------------
11:43:57 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 736053248, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
359251 | lead-out | 1 | 0x41 | 0x00
11:43:57 #13 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
11:43:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:46:33 #15 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 359251 (57B53h), lenght 0 blocks
11:46:33 #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:46:33 #17 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
11:46:41 #1 Text 0 File Burncd.cpp, Line 2948
PLEXTOR DVDR PX-716A
BURN-Proof activés
11:46:41 #2 Text 0 File Reader.cpp, Line 127
Reader running
11:46:41 #3 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running
11:46:41 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 736053248
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=79:50.01 ( 359251) RecDep=0x00
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Documents and Settings\Thierry\Mes documents\TempImage.nrg>
11:46:41 #5 Text 0 File Burncd.cpp, Line 3233
Turn on UltraRaw 96-Mode, using CD-R/RW media
11:46:57 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 359250 ( 79:52.00)
11:46:57 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
11:46:57 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A;
CDRW code: 00 97 22 60; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
11:46:57 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Inconnu. Medium required by compilation: CD-R/RW.)
11:46:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Mode CD-ROM 1, ISO 9660)
2 indices, index0 (150) provided
original disc pos #0 + 359251 (359251) = #359251/79:50.1
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 359251 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------
11:46:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 879813648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
359251 | lead-out | 1 | 0x41 | 0x00
11:46:57 #12 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 10x (1 500 Ko/s)
11:46:57 #13 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x057C6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02
11:46:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:46:57 #15 Text 0 File Mmc.cpp, Line 17024
StartDAO : CD-Text - Off
11:46:57 #16 Text 0 File Mmc.cpp, Line 21774
Set BUFE: BURN-Proof -> ON
11:55:15 #17 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 359251 (57B53h), lenght 6750 blocks
11:55:22 #18 SCSI -1066 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0E1F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x8F 0x6F 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
11:55:22 #19 CDR -1066 File Writer.cpp, Line 311
Invalid field in command
11:55:22 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:55:23 #21 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 10x (1 500 Ko/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 07/10/2003 01:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Si quelqu'un pouvait m'aider, d'avance je le remercie
PS: je viens de tenter la copie du même CD sur le même réinscriptible avec Alcohol et la simulation est OK et la gravure aussi je comprens pas pourquoi Nero refuse de le graver
, le wifi et 2 ou 3 trucs pas très lourds (svchost.exe en autres)
Flux RSS