Gravure-News

[Scorpion]

Bonjour à tous,

Je suis sous Windows XP SP 2, j'utilise le logiciel Nero 8.0.3.0, mon graveur est de marque LG GSA-4160B (firmwire mis à jour) et j'ai depuis peu un problème lors de la gravure de DVR-R :
- A peu près à 6% de l'étape de gravure le disque est éjecté Néro m'indique que la gravure à échoué et le mesage d'erreur suivant apparaît "Impossible d'effectuer la fonction Disc at once... Erreur de Focus / Tracking".
Pour infos :
- La gravure sur DVD-RW et sur CD-R / RW fonctionne correctement.
- Le problème a débuté alors que j'utilisais encore la version 7 de Néro (qui fonctionnait pourtant sans problème).
- Le mode DMA est activé.
- La gravure de XP est désactivée.
- J'ai essayé d'utiliser le logiciel gratuit DeepBurner avec des DVD-R mais la gravure échoue également.

Je remercie par avance les personnes qui s'interesseront à ce sujet et si quelqu'un à une idée sur l'origine de ce problème ou une proposition pour le solutionner alors là ce sera le bonheur...
De mon côté, je continue à chercher et si je réussi à résoudre ce disfonctionnement, je vous tiendrai au courant.

Bonne soirée !

[Stef]

Bonsoir à toi
Tu peux nous en dire plus ? Changement de supprot vierges ? Pilotes installés ?
Peux tu nous mettre le fichier Log de Nero à disposition ?

[Scorpion]

Bonjour,

En ce qui concerne les supports il s'agissait de DVD-R 8X de marque Mirror achetés sur un site internet il y a quelques temps et avec lesquel je n'avait jamais eu de soucis jusque ici, mais à priori le problème vient bien du support car ayant épuisé mon stock de DVD Mirror, j'ai gravé sur des DVD Philips 8X et en dehors d'un temps de gravure que je trouve particulèrement long (entre 20 et 45 minutes en 8X), la gravure se termine avec succès à chaque fois (mode UDF et ISO).

Voici ce qui s'est passé depuis mon premier message :
Je suis allé sur le site de tous les drivers.com et j'ai fait annalyser la configuration de mon PC (Mes Drivers). Suite à cette analyse j'ai téléchargé sept pilotes plus récents pour l'ensemble des éléments de mon PC et je les ai installé, mais le problème ne se situait pas à ce niveau car j'ai refait des tentatives de gravures entre chaque installation et elles ont toutes échouées jusqu'a ce que j'utilise les DVD Philips.

Les DVD Mirror étant vendus par lot de 50, il est possible que je sois tombé sur une serie défectueuse puisque j'en ai jeté environ 25 sur les 100 que j'ai acheté.

Je met deux fichiers log à disposition, le premier correspond à une des dernières gravures échouée et le second à une des dernières qui ont réussies, mais pour lesquelles le temps me semble trop long.

En tous les cas je vous remercie pour l'intérêt que vous avez apporté à mon problème.

Premier log :
Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0

Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 5 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST RW/DVD GCC-4520B>Version: 1.00 - HA 1 TA 1 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC35L120AVV207-1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4520B atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-32CLB0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NH6490F MTY564Q 2.0B azzbf54g Port 2 ID 0 DMA: Off
CdRomPeripheral : UD7908I IJF844A 1.0 dtscsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4520B I: CdRom1
NH6490F MTY564Q K: CdRom2
UD7908I IJF844A J: CdRom3
HL-DT-ST DVDRAM GSA-4160B H: CdRom5
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 229MB (234892kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.2.2008
Compilation ISO
19:50:10 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:50:10 #2 Text 0 File Isodoc.cpp, Line 6668
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:50:10 #3 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)

19:50:10 #4 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

19:50:11 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2256319 (501:24.19, 4406MB)

19:50:11 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

19:50:11 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

19:50:11 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:50:11 #9 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2256320 (2256320) = #2256320/501:24.20
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2256320 blocks [H: HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------

19:50:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [H: HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4620943360, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2256320 | 0 | 0x00
2256320 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

19:50:11 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

19:50:11 #12 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

19:50:11 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

19:50:11 #14 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.

19:50:11 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

19:50:11 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11 080 Ko/s)

19:50:11 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:50:11 #18 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode

19:50:11 #19 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: Yes

19:50:11 #20 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:50:11 #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400

19:50:33 #22 Text 0 File Cdrdrv.cpp, Line 1342
19:50:33.156 - 㩈䠠ⵌ呄匭⁔噄剄䵁䜠䅓㐭㘱䈰 : Queue again later

19:51:49 #23 SPTI -1039 File SCSIPassThrough.cpp, Line 181
CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 00 00 03 B8 60 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 10 32 34 00 0C 09 01
Buffer x0cd3cc00: Len x10000
0x7B 24 8D 8E 64 A7 5E 81 43 35 11 34 64 39 2D 89
0xC6 FE EA 28 EC DA B2 04 1B 57 CF 43 65 C5 27 A8
0x28 F9 04 3B 37 9A 71 AD A3 04 AB 57 7D 84 A2 3C

19:51:49 #24 CDR -1039 File Writer.cpp, Line 312
Focus or tracking error
H: HL-DT-ST DVDRAM GSA-4160B

19:51:50 #25 Text 0 File DVDR.cpp, Line 3785
EndDAO: Last written address was 243807 (3B85Fh)

19:51:50 #26 CDR -1039 File WriterStatus.cpp, Line 162
Focus or tracking error
H: HL-DT-ST DVDRAM GSA-4160B

19:51:50 #27 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

19:51:50 #28 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11 080 Ko/s)

19:51:50 #29 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:51:55 #30 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

19:51:55 #31 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Second log :
Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0

Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST RW/DVD GCC-4520B>Version: 1.00 - HA 1 TA 1 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC35L120AVV207-1 atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4520B atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-32CLB0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NH6490F MTY564Q 2.0B aolb93wu Port 2 ID 0 DMA: Off
CdRomPeripheral : UD7908I IJF844A 1.0 dtscsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4160B H: CdRom0
HL-DT-ST RW/DVD GCC-4520B I: CdRom1
NH6490F MTY564Q K: CdRom2
UD7908I IJF844A J: CdRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 221MB (226484kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.2.2008
Compilation ISO
15:16:40 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

15:16:41 #2 Text 0 File Isodoc.cpp, Line 6668
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:16:42 #3 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)

15:16:42 #4 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

15:16:42 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2246319 (499:10.69, 4387MB)

15:16:42 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

15:16:42 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD-R
Disc Manufacturer: MBI 01 - RG40
Disc Application Code: 64, Disc Physical Code: 193

15:16:42 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:16:42 #9 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2246320 (2246320) = #2246320/499:10.70
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2246320 blocks [H: HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------

15:16:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [H: HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4600463360, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2246320 | 0 | 0x00
2246320 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

15:16:42 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

15:16:42 #12 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

15:16:42 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

15:16:42 #14 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.

15:16:42 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

15:16:42 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11 080 Ko/s)

15:16:42 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:16:42 #18 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode

15:16:42 #19 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: Yes

15:16:42 #20 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:16:42 #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400

15:17:37 #22 Text 0 File Cdrdrv.cpp, Line 1342
15:17:37.937 - 㩈䠠ⵌ呄匭⁔噄剄䵁䜠䅓㐭㘱䈰 : Queue again later

16:01:45 #23 Text 0 File WriterStatus.cpp, Line 113
<H: HL-DT-ST DVDRAM GSA-4160B> start writing Lead-Out at LBA 2246320 (2246B0h), length 0 blocks

16:01:57 #24 Text 0 File DVDR.cpp, Line 3785
EndDAO: Last written address was 2246319 (2246AFh)

16:01:57 #25 Phase 37 File dlgbrnst.cpp, Line 1762
Burn process completed successfully at 8x (11 080 Ko/s)

16:01:59 #26 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

16:02:03 #27 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

16:02:03 #28 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Merci à tous et bon week-end !

[Scaramanga]

En ce qui concerne le temps trop long , cela vient probablement du fait que le mode de transf[/quote]ert de ton DD et mode DMA off. Dans ton second Log :

Code: Tout sélectionner

DiskPeripheral : IC35L120AVV207-1 atapi Port 0 ID 0 DMA: Off

Il faut activer le mode DMA de ce périphérique.
http://www.gravure-news.com/html/tuto/03/page01.php


Essais de diminuer le vitesse de graveur avec les Mirrors, passe à 4X, voir 2X plutot que 8X.

[Scorpion]

Bonsoir à tous,

Bon eh bien tout est rentré dans l'ordre, je grave sans problème à 8X dans des temps beaucoup plus réduits.

Merci pour vos conseils, vos idées et votre participation.

Bonne soirée !