Gravure-News

[carlos]

Bonjour à tous,

Avant tout votre forum est génial.
Bien voici mon problème, je grave une compilation de données diverses avec nero Version 6.3.1.10 et lorsque je lance la gravure, une erreur survient en cours de gravure sans que je ne comprenne exactement le pourquoi.

- DMA activée sauf pour le graveur mais je ne sais pas comment l'activer
- Logiciel de gravure de XP est désactivé

Voici le rapport d'erreur donné par nero :
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Version de Nero : 6.3.1.10 (Nero Express)
Graveur : <SONY CD-RW CRX215E1> Version: SYS2 - HA 1 TA 0 - 6.3.1.10
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <SAMSUNG CD-ROM SC-140F >Version: FB06 - HA 1 TA 1 - 6.3.1.10
Pilote d'adaptateur :<atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST310212A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX215E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SAMSUNG CD-ROM SC-140F atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY CD-RW CRX215E1 E: CDRom0
SAMSUNG CD-ROM SC-140F F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 48234496 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 311MB (318964kB)
Free physical memory: 80MB (82276kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.5.2004
CD-ROM (ISO)
12:05:03 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:05:05 #2 Phase 96 File dlgbrnst.cpp, Line 1841
Protection contre les ruptures de tampon activée

12:05:05 #3 Text 0 File Reader.cpp, Line 118
Reader running

12:05:05 #4 Text 0 File Writer.cpp, Line 124
Writer SONY CD-RW CRX215E1 running

12:05:05 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:05:07 #6 Text 0 File Burncd.cpp, Line 3200
Turn on Piste par piste, using CD-R/RW media

12:05:09 #7 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 219239 ( 48:45.14)

12:05:09 #8 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

12:05:09 #9 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: SONY CD-RW CRX215E1;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

12:05:09 #10 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:05:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 219240 (219240) = #219240/48:43.15
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 219238 blocks [SONY CD-RW CRX215E1 ]
--------------------------------------------------------------

12:05:10 #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [SONY CD-RW CRX215E1 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 449310720, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
219240 | lead-out | 1 | 0x00 | 0x41

12:05:10 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
Removed 2 run-out blocks from end of track 1. Length: 219240 -> 219238.

12:05:10 #14 Phase 24 File dlgbrnst.cpp, Line 1841
Début de mise en cache des fichiers

12:05:13 #15 Text 0 File Burncd.cpp, Line 4210
Cache writing successful.

12:05:13 #16 Phase 25 File dlgbrnst.cpp, Line 1841
Cache des fichiers terminé

12:05:13 #17 Phase 36 File dlgbrnst.cpp, Line 1841
Début de gravure à 32x (4.800 Ko/s)

12:05:14 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:05:15 #19 Text 0 File Mmc.cpp, Line 20051
Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON

12:07:29 #20 SCSI -1135 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04F50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0x2B 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

12:07:29 #21 CDR -1135 File Writer.cpp, Line 304
Erreur écriture

12:07:29 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:07:30 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

12:07:30 #24 CDR -201 File WriterStatus.cpp, Line 196
Fonction writestate invalide
SONY CD-RW CRX215E1\H1 T0

12:07:30 #25 TRANSFER -18 File WriterStatus.cpp, Line 196
Impossible d'exécuter EndTrack

12:07:30 #26 Text 0 File Mmc.cpp, Line 14887
<SONY CD-RW CRX215E1 > start Close Session

12:07:42 #27 SCSI -1176 File Cdrdrv.cpp, Line 1185
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x00

12:07:42 #28 CDR -1176 File WriterStatus.cpp, Line 245
Erreur fixation session

12:07:42 #29 TRANSFER -19 File WriterStatus.cpp, Line 245
Impossible d'effectuer la fonction Fixation

12:07:42 #30 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

12:07:42 #31 Text 0 File Mmc.cpp, Line 14887
<SONY CD-RW CRX215E1 > start Close Session

12:07:44 #32 Phase 38 File dlgbrnst.cpp, Line 1841
La gravure a échoué à 32x (4.800 Ko/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 1:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Si vous pouviez m'aider ce serait super sympa

[jeff]

La gravure a échoué à 32x (4.800 Ko/s)

Déja reduit la vitesse de gravure car source d'erreur et essayes une autre marque de médias

[carlos]

Je ne comprend pas pourquoi la DMA du graveur est off
>>CdRomPeripheral : SONY CD-RW CRX215E1 atapi Port 1 ID 0 DMA: Off
Comment puis la mettre ON

La marque du média utilisé est MAXELL CD-R 80 min.

[jeff]

Détailles ton matos sur la nappe il est connecté comment et avec quoi

[Redoxon]

DMA et PIO

http://forum.gravure-news.com/viewtopic ... ph&start=0