Gravure-News

[DANLAU]

BONJOUR

J'ai mis à jour ma version ce néro et ma gravure dvd-video à planté à 98% je joint le log de nero lWindows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
Nero version: 6.3.0.3
Recorder: <DVDRW IDE1008> Version: 0052 - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE1008 >Version: 0052 - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST315323A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1008 E: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 127MB (130612kB)
Free physical memory: 28MB (29648kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.2.2004
UDF/ISO compilation
17:25:03 #1 Phase 112 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation started

17:25:03 #2 Phase 114 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation completed (no file modified)

17:25:03 #3 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

17:25:03 #4 Phase 111 File dlgbrnst.cpp, Line 1800
DVD-Video files sorted

17:25:03 #5 Text 0 File Reader.cpp, Line 118
Reader running

17:25:03 #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

17:25:03 #7 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE1008 running

17:25:03 #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

17:25:04 #9 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

17:25:42 #10 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2077311 (461:37.36, 4057MB)

17:25:42 #11 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

17:25:42 #12 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: DVDRW IDE1008, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

17:25:42 #13 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD-ROM. Medium required by compilation: DVD+R/RW; DVD-R/RW.)

17:25:42 #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2077312 (2077312) = #2077312/461:37.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2077312 blocks [DVDRW IDE1008 ]
--------------------------------------------------------------

17:25:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [DVDRW IDE1008 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4254334976, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2077312 | lead-out | 1 | 0x00 | 0x41

17:25:43 #16 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

17:25:43 #17 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

17:25:43 #18 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

17:25:44 #19 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5 520 KB/s)

17:25:44 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:25:44 #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 51:24,578 (3084578ms) -> OK

17:25:45 #22 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

17:25:45 #23 Text 0 File Mmc.cpp, Line 19487
Set BUFE: Super Link -> ON

17:25:45 #24 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

17:25:45 #25 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:26:15 #26 Text 0 File Cdrdrv.cpp, Line 1277
17:26:15.266 - DVDRW IDE1008\H1 T0 : Queue again later

18:33:56 #27 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x046C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1D 0xAD 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

18:33:56 #28 CDR -1135 File Writer.cpp, Line 301
Write error

18:33:56 #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:33:56 #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

18:33:56 #31 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 1944895

18:34:19 #32 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

18:34:19 #33 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

18:34:19 #34 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (5 520 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 30/08/2002 12:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

e log si quelqu'un peut m'aider merci

[speigel]

bonsoir danlau

Burn process started at 4x (5 520 KB/s)

Burn process failed at 4x (5 520 KB/s)

4x c'est un peu rapide pour de la gravure video, même si cette vitesse est supportée par ton graveur et ton support.!!

re-commence à1x, voir 2x

et pourquoi s'il s'agit d-une gravure video, tu fait une compil udf/iso ??

14.2.2004
UDF/ISO compilation

salutations

speigel

[DANLAU]

Bonjour speigel

c'est nero qui paramétre tout seul la vitesse de gravage, j'vais essayé de le gravé en 2 X MERCI BEAUCOUP