graveur ne reconnais pas dvd vierge

Forum de support des graveurs et périphériques Lite-On.

graveur ne reconnais pas dvd vierge

Messagepar opale » 21 Oct 2007 5:33

bonsoir

mon graveur lit et grave cd
lit dvd,mais ne reconnait pas disc dvd vierge
alors je ne peux pas graver film
pouvez vous m'aider
merci opale
opale
Nouveau Membre
 
Messages: 6
Enregistré le: 21 Oct 2007

Messagepar Scaramanga » 21 Oct 2007 5:58

Salut et bienvenue sur le forum de Gravure-News,

C'est ce qu'on appel un pb de compatibilité de média.
LA première chose a faire et de vérifier si un firmware est disponible pour ton graveur.
La seconde , essayer une autre marque....

Si tu veux un peu plus d'aide, donne nous le modéle de ton graveur, ton OS, le logiciel de gravure et accessoirement un fichier Log de gravure.

:wink:
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14146
Enregistré le: 05 Sep 2002

Messagepar opale » 21 Oct 2007 6:20

mon graveur est lite-on LH20A1H
je grave avec nero 7
le log je sais pas ou aller le chercher
opale
Nouveau Membre
 
Messages: 6
Enregistré le: 21 Oct 2007

Messagepar Scaramanga » 21 Oct 2007 16:52

Log de Nero : il se nomnes NeroHistoryLog, c' est un fichier texte ( à ouvre avec notepad par exemple) , généré p dans le dossier :
Nero 7: "C:\Programs\Nero\Nero 7\Core"
Ou dans C:\Documents and Settings\le_nom_de_l'utiliosateur\Application Data\Ahead\Nero Burning ROM

Attention : virer le serial figurant au début du texte.

:wink:
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14146
Enregistré le: 05 Sep 2002

voila le log

Messagepar opale » 21 Oct 2007 18:48

je vous envoie le log
entre temps j'ai reinstallé nero
je suis en train de voir si il fonctionne
merci de me repondre

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 01:48:21
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero API version: 7.5.13.1
Using interface version: 7.5.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 13, 1

Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0A - HA 1 TA 1 - 7.5.13.1
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8400B E: CDRom0
LITE-ON DVDRW LH-20A1H G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 289MB (296028kB)
Memory in use : 43
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.6.2007
NeroAPI
17:38:16 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

17:38:16 #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

17:38:17 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

17:38:17 #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

17:38:17 #5 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

17:38:19 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2256607 (501:28.07, 4407MB)

17:38:19 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

17:38:19 #8 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

17:38:19 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:38:19 #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2256608 (2256608) = #2256608/501:28.8
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2256608 blocks [G: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------

17:38:19 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4621533184, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2256608 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2256608 | 0 | 0x00
2256608 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

17:38:39 #12 Text 0 File SCSIPTICommands.cpp, Line 231
Error on LockVolume: Accès refusé.

17:38:39 #13 Text 0 File SCSIPTICommands.cpp, Line 277
SPTI - Error on DismountVolue: Accès refusé.

17:38:49 #14 Text 0 File SCSIPTICommands.cpp, Line 231
Error on LockVolume: Accès refusé.

17:38:49 #15 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

17:38:49 #16 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

17:38:49 #17 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

17:38:49 #18 Phase 28 File APIProgress.cpp, Line 282
Speed measurement started

17:38:50 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:44:27 #20 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-20A1H> start writing Lead-Out at LBA 2256608 (226EE0h), length 0 blocks

17:44:28 #21 Phase 29 File APIProgress.cpp, Line 282
Speed measurement completed: 9.6x (13 356 KB/s)

17:44:28 #22 Text 0 File Burncd.cpp, Line 4425
Can only write at 8x instead of 20x,
because speed of source data is too slow

17:44:28 #23 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 8x (11 080 KB/s)

17:44:28 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:44:28 #25 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode

17:44:28 #26 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 0
DVD high compatibility mode: Yes

17:44:28 #27 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:46:11 #28 Text 0 File Cdrdrv.cpp, Line 1311
17:46:11.656 - G: LITE-ON DVDRW LH-20A1H : Queue again later

19:09:49 #29 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-20A1H> start writing Lead-Out at LBA 2256608 (226EE0h), length 0 blocks

19:09:49 #30 Text 0 File DVDR.cpp, Line 3468
EndDAO: Last written address was 2256607

19:10:10 #31 Phase 37 File APIProgress.cpp, Line 282
Burn process completed successfully at 8x (11 080 KB/s)

19:10:12 #32 Text 0 File SCSIPTICommands.cpp, Line 277
SPTI - Error on DismountVolue: Accès refusé.

19:10:17 #33 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

19:10:17 #34 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-08-24 23:47:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2005-11-21 01:48:21
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 23:47:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
4C87-2018-2045-477K-055X-403E-9539-**** (*)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 01:48:21
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero API version: 7.5.13.1
Using interface version: 7.5.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 13, 1

Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0A - HA 1 TA 1 - 7.5.13.1
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8400B E: CDRom0
LITE-ON DVDRW LH-20A1H G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 287MB (294524kB)
Memory in use : 43
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.6.2007
NeroAPI
01:50:21 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

01:50:21 #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

01:50:21 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

01:50:21 #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

01:50:22 #5 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

01:50:23 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2252847 (500:37.72, 4400MB)

01:50:23 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

01:50:23 #8 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

01:50:23 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

01:50:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2252848 (2252848) = #2252848/500:37.73
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2252848 blocks [G: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------

01:50:24 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4613832704, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2252848 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2252848 | 0 | 0x00
2252848 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

01:50:44 #12 Text 0 File SCSIPTICommands.cpp, Line 231
Error on LockVolume: Accès refusé.

01:50:44 #13 Text 0 File SCSIPTICommands.cpp, Line 277
SPTI - Error on DismountVolue: Accès refusé.

01:50:54 #14 Text 0 File SCSIPTICommands.cpp, Line 231
Error on LockVolume: Accès refusé.

01:50:54 #15 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

01:50:54 #16 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

01:50:54 #17 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

01:50:54 #18 Phase 28 File APIProgress.cpp, Line 282
Speed measurement started

01:50:54 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

01:55:10 #20 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-20A1H> start writing Lead-Out at LBA 2252848 (226030h), length 0 blocks

01:55:10 #21 Phase 29 File APIProgress.cpp, Line 282
Speed measurement completed: 12.7x (17 626 KB/s)

01:55:10 #22 Text 0 File Burncd.cpp, Line 4425
Can only write at 12x instead of 20x,
because speed of source data is too slow

01:55:10 #23 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 12x (16 620 KB/s)

01:55:10 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

01:55:11 #25 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode

01:55:11 #26 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 0
DVD high compatibility mode: Yes

01:55:11 #27 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

01:55:43 #28 Text 0 File Cdrdrv.cpp, Line 1311
01:55:43.703 - G: LITE-ON DVDRW LH-20A1H : Queue again later

03:16:06 #29 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-20A1H> start writing Lead-Out at LBA 2252848 (226030h), length 0 blocks

03:16:07 #30 Text 0 File DVDR.cpp, Line 3468
EndDAO: Last written address was 2252847

03:16:28 #31 Phase 37 File APIProgress.cpp, Line 282
Burn process completed successfully at 12x (16 620 KB/s)

03:16:29 #32 Text 0 File SCSIPTICommands.cpp, Line 277
SPTI - Error on DismountVolue: Accès refusé.

03:16:34 #33 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

03:16:34 #34 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-08-24 23:47:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2005-11-21 01:48:21
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 23:47:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
4C87-2018-2045-477K-055X-403E-9539-**** (*)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 01:48:21
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero API version: 7.5.13.1
Using interface version: 7.5.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 13, 1

Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0A - HA 1 TA 1 - 7.5.13.1
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8400B E: CDRom0
LITE-ON DVDRW LH-20A1H G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 268MB (274608kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.6.2007
NeroAPI
14:21:32 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

14:21:33 #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:21:33 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

14:21:33 #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

14:21:33 #5 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

14:21:35 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2232159 (496:02.09, 4359MB)

14:21:35 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

14:21:36 #8 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

14:21:36 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:21:36 #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2232160 (2232160) = #2232160/496:2.10
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2232160 blocks [G: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------

14:21:36 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4571463680, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2232160 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2232160 | 0 | 0x00
2232160 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

14:21:36 #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

14:21:36 #13 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

14:21:36 #14 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

14:21:36 #15 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

14:21:36 #16 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 2x (2 770 KB/s)

14:21:37 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:21:37 #18 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode

14:21:37 #19 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 0
DVD high compatibility mode: Yes

14:21:37 #20 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14:22:07 #21 Text 0 File Cdrdrv.cpp, Line 1311
14:22:07.484 - G: LITE-ON DVDRW LH-20A1H : Queue again later

15:37:00 #22 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-20A1H> start writing Lead-Out at LBA 2232160 (220F60h), length 0 blocks

15:37:00 #23 Text 0 File DVDR.cpp, Line 3468
EndDAO: Last written address was 2232159

15:37:42 #24 Phase 37 File APIProgress.cpp, Line 282
Burn process completed successfully at 2x (2 770 KB/s)

15:37:43 #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

15:37:46 #26 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

15:37:46 #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-08-24 23:47:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2005-11-21 01:48:21
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 23:47:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
4C87-2018-2045-477K-055X-403E-9539-**** (*)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 01:48:21
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero API version: 7.5.13.1
Using interface version: 7.5.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 13, 1

Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0A - HA 1 TA 1 - 7.5.13.1
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8400B E: CDRom0
LITE-ON DVDRW LH-20A1H G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 328MB (336196kB)
Memory in use : 35
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.6.2007
NeroAPI
17:52:38 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

17:52:38 #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

17:52:38 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

17:52:38 #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

17:52:38 #5 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

17:52:40 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1040399 (231:11.74, 2032MB)

17:52:40 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

17:52:40 #8 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

17:52:40 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:52:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1040400 (1040400) = #1040400/231:12.0
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1040400 blocks [G: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------

17:52:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2130739200, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1040400 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1040400 | 0 | 0x00
1040400 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

17:52:40 #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:52:40 #13 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

17:52:40 #14 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

17:52:40 #15 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

17:52:40 #16 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 20x (27 700 KB/s)

17:52:40 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:52:41 #18 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode

17:52:41 #19 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 0
DVD high compatibility mode: Yes

17:52:41 #20 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:53:15 #21 Text 0 File Cdrdrv.cpp, Line 1311
17:53:15.296 - G: LITE-ON DVDRW LH-20A1H : Queue again later

18:28:07 #22 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-20A1H> start writing Lead-Out at LBA 1040400 (FE010h), length 0 blocks

18:28:07 #23 Text 0 File DVDR.cpp, Line 3468
EndDAO: Last written address was 1040399

18:28:24 #24 Phase 37 File APIProgress.cpp, Line 282
Burn process completed successfully at 20x (27 700 KB/s)

18:28:26 #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

18:28:31 #26 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

18:28:32 #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-08-24 23:47:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2005-11-21 01:48:21
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 23:47:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
4C87-2018-2045-477K-055X-403E-9539-**** (*)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 01:48:21
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero API version: 7.5.13.1
Using interface version: 7.5.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 13, 1

Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0A - HA 1 TA 1 - 7.5.13.1
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8400B E: CDRom0
LITE-ON DVDRW LH-20A1H G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 293MB (300684kB)
Memory in use : 42
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.6.2007
NeroAPI
02:26:41 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

02:26:41 #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

02:26:41 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

02:26:41 #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

02:26:41 #5 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

02:26:42 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2245279 (498:57.04, 4385MB)

02:26:42 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

02:26:42 #8 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

02:26:42 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

02:26:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2245280 (2245280) = #2245280/498:57.5
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2245280 blocks [G: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------

02:26:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4598333440, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2245280 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2245280 | 0 | 0x00
2245280 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

02:26:42 #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

02:26:42 #13 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

02:26:42 #14 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

02:26:42 #15 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

02:26:42 #16 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 20x (27 700 KB/s)

02:26:43 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

02:26:43 #18 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode

02:26:44 #19 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 0
DVD high compatibility mode: Yes

02:26:44 #20 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

02:27:07 #21 Text 0 File Cdrdrv.cpp, Line 1311
02:27:07.921 - G: LITE-ON DVDRW LH-20A1H : Queue again later

03:42:31 #22 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-20A1H> start writing Lead-Out at LBA 2245280 (2242A0h), length 0 blocks

03:42:31 #23 Text 0 File DVDR.cpp, Line 3468
EndDAO: Last written address was 2245279

03:42:51 #24 Phase 37 File APIProgress.cpp, Line 282
Burn process completed successfully at 20x (27 700 KB/s)

03:42:52 #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

03:42:57 #26 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

03:42:57 #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-08-24 23:47:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2005-11-21 01:48:21
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 23:47:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
4C87-2018-2045-477K-055X-403E-9539-**** (*)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 01:48:21
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero API version: 7.5.13.1
Using interface version: 7.5.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 13, 1

Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0A - HA 1 TA 1 - 7.5.13.1
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8400B E: CDRom0
LITE-ON DVDRW LH-20A1H G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 369MB (378368kB)
Memory in use : 27
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.7.2007
NeroAPI
14:27:34 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

14:27:35 #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:27:36 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

14:27:36 #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

14:27:36 #5 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

14:27:37 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2181647 (484:48.47, 4261MB)

14:27:37 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

14:27:37 #8 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

14:27:37 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:27:37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2181648 (2181648) = #2181648/484:48.48
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2181648 blocks [G: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------

14:27:37 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4468015104, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2181648 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2181648 | 0 | 0x00
2181648 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

14:27:37 #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

14:27:37 #13 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

14:27:37 #14 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

14:27:37 #15 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

14:27:37 #16 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 20x (27 700 KB/s)

14:27:37 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:27:37 #18 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode

14:27:37 #19 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 0
DVD high compatibility mode: Yes

14:27:38 #20 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14:28:10 #21 Text 0 File Cdrdrv.cpp, Line 1311
14:28:10.843 - G: LITE-ON DVDRW LH-20A1H : Queue again later

14:37:14 #22 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-20A1H> start writing Lead-Out at LBA 2181648 (214A10h), length 0 blocks

14:37:14 #23 Text 0 File DVDR.cpp, Line 3468
EndDAO: Last written address was 2181647

14:37:36 #24 Phase 37 File APIProgress.cpp, Line 282
Burn process completed successfully at 20x (27 700 KB/s)

14:37:38 #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:37:43 #26 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

14:37:43 #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-08-24 23:47:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2005-11-21 01:48:21
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 23:47:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
4C87-2018-2045-477K-055X-403E-9539-**** (*)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 01:48:21
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero API version: 7.5.13.1
Using interface version: 7.5.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 13, 1

Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0A - HA 1 TA 1 - 7.5.13.1
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8400B E: CDRom0
LITE-ON DVDRW LH-20A1H G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 264MB (270720kB)
Memory in use : 48
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.7.2007
NeroAPI
16:56:15 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

16:56:16 #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

16:56:16 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

16:56:16 #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

16:56:16 #5 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

16:56:17 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243199 (498:29.24, 4381MB)

16:56:17 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

16:56:17 #8 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

16:56:17 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16:56:17 #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243200 (2243200) = #2243200/498:29.25
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243200 blocks [G: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------

16:56:17 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4594073600, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2243200 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2243200 | 0 | 0x00
2243200 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

16:56:17 #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

16:56:18 #13 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

16:56:18 #14 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

16:56:18 #15 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

16:56:18 #16 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 20x (27 700 KB/s)

16:56:18 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16:56:18 #18 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode

16:56:18 #19 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 0
DVD high compatibility mode: Yes

16:56:18 #20 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:06:25 #21 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x29f90040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

17:06:26 #22 CDR -600 File Writer.cpp, Line 299
Device not available
G: LITE-ON DVDRW LH-20A1H

17:13:53 #23 Text 0 File DVDR.cpp, Line 3468
EndDAO: Last written address was -1

17:13:54 #24 CDR -1076 File WriterStatus.cpp, Line 162
Disc changed
G: LITE-ON DVDRW LH-20A1H

17:13:54 #25 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

17:13:55 #26 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 20x (27 700 KB/s)

17:13:55 #27 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

17:13:57 #28 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

17:13:58 #29 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-08-24 23:47:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2005-11-21 01:48:21
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 23:47:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
4C87-2018-2045-477K-055X-403E-9539-**** (*)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 01:48:21
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero API version: 7.5.13.1
Using interface version: 7.5.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 13, 1

Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0A - HA 1 TA 1 - 7.5.13.1
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8400B E: CDRom0
LITE-ON DVDRW LH-20A1H G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 347MB (356072kB)
Memory in use : 32
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.7.2007
NeroAPI
13:14:54 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

13:14:54 #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

13:14:54 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

13:14:54 #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

13:14:54 #5 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

13:14:55 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2243215 (498:29.40, 4381MB)

13:14:55 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

13:14:55 #8 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

13:14:55 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:14:55 #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243216 (2243216) = #2243216/498:29.41
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243216 blocks [G: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------

13:14:55 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4594106368, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2243216 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2243216 | 0 | 0x00
2243216 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

13:14:55 #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

13:14:55 #13 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

13:14:55 #14 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

13:14:55 #15 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

13:14:55 #16 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 20x (27 700 KB/s)

13:14:56 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:14:56 #18 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode

13:14:56 #19 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 0
DVD high compatibility mode: Yes

13:14:56 #20 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

13:15:28 #21 Text 0 File Cdrdrv.cpp, Line 1311
13:15:28.765 - G: LITE-ON DVDRW LH-20A1H : Queue again later

13:22:14 #22 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-20A1H> start writing Lead-Out at LBA 2243216 (223A90h), length 0 blocks

13:22:14 #23 Text 0 File DVDR.cpp, Line 3468
EndDAO: Last written address was 2243215

13:22:32 #24 Phase 37 File APIProgress.cpp, Line 282
Burn process completed successfully at 20x (27 700 KB/s)

13:22:34 #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:22:38 #26 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

13:22:38 #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-08-24 23:47:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2005-11-21 01:48:21
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 23:47:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
4C87-2018-2045-477K-055X-403E-9539-**** (*)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 01:48:21
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero API version: 7.5.13.1
Using interface version: 7.5.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 5, 13, 1

Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0A - HA 1 TA 1 - 7.5.13.1
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8400B E: CDRom0
LITE-ON DVDRW LH-20A1H G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 232MB (238548kB)
Memory in use : 54
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.7.2007
NeroAPI
17:25:05 #1 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

17:25:06 #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

17:25:06 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

17:25:07 #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

17:25:07 #5 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

17:25:07 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2224655 (494:22.05, 4345MB)

17:25:07 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

17:25:07 #8 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

17:25:07 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:25:07 #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2224656 (2224656) = #2224656/494:22.6
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2224656 blocks [G: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------

17:25:07 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4556095488, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2224656 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2224656 | 0 | 0x00
2224656 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

17:25:07 #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:25:08 #13 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

17:25:08 #14 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

17:25:08 #15 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

17:25:08 #16 Phase 36 F
opale
Nouveau Membre
 
Messages: 6
Enregistré le: 21 Oct 2007

Messagepar Scaramanga » 21 Oct 2007 19:04

1)Met a jour le firmware de ton LiteOn, tu as la LL0A la derniére dispo est LL0C.
>http://www.liteonit.com/global/index.php?option=com_wrapper&Itemid=75


2) Met a jour ta vertsion de Nero : tu possédes la7.5.13.1 , la derniére version dispo est 7.10.1.0.

>http://www.gravure-news.com/download/201.php
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14146
Enregistré le: 05 Sep 2002

merci

Messagepar opale » 21 Oct 2007 20:09

merci ca fonctionne
réponse rapide apprécié
tres gentil de ta part
opa :praise: le
opale
Nouveau Membre
 
Messages: 6
Enregistré le: 21 Oct 2007



  • Publicité

Retourner vers Graveurs Lite-On

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 1 invité

cron