Gravure Blu-Ray IMPOSSIBLE

Problèmes de fonctionnement, tests, conseils d'achat... Posez votre question ici (Nec, Sony, Teac, Traxdata...).

Gravure Blu-Ray IMPOSSIBLE

Messagepar the.lucky » 06 Juin 2010 20:55

Je viens vers vous pour vous demander de l'aide.

Il m'est impossible de graver des disques Blu-Ray, ceux-ci commence à être gravé et vers la fin Nero me dit Erreur de gravure :doh: . Que ce soit avec des BD-R 25 Go Sony ou des BD DL 50Go Verbatim. Je grave des photos à partir de disque dur en RAID 1 automatique par système Asus. Je commence à foutre pas mal d'argent en l'air avec tous ces Blu-Ray loupé :neutral: :? .
Je suis normalement sous Windows XP Pro 32 bits avec Nero 9 en gravure ISO, et j'ai même essayé en changeant de disque système et en y installant un Windows Seven tout propre. :doh:

Voici les infos de mon ordinateur, d'abord le rapport Everest sur mon matériel puis les logs de mes trois derniers loupé de gravure par Nero .

Si vous pouviez me tirer de ce mauvais pas. :praise: Je n'ai jamais eu de problème partculier avec mon ordinateur qui est à mon sens de bonne composition mais là sur les Blu-Ray, c'est une horreur. J'en viens à me demander si il faut une bécane spéciale pour pouvoir graver en Blu-Ray. :?


Mon matériel par Everest :

Ordinateur:
Système d'exploitation Microsoft Windows XP Professional
Service Pack du système Service Pack 3
DirectX 4.09.00.0904 (DirectX 9.0c)

Carte mère:
Type de processeur 2x , 2400 MHz (7 x 343)
Nom de la carte mère Asus P5W DH Deluxe
Mémoire système 3200 Mo
Type de BIOS AMI (01/17/08)
Port de communication Port de communication (COM1)

Moniteur:
Carte vidéo NVIDIA GeForce 8600 GTS (512 Mo)
Moniteur SyncMaster 971P,SyncMaster Magic CX913P/CX971P(Digital) [NoDB] (HVMP905523)

Multimédia:
Carte audio Intel 82801GB ICH7 - High Definition Audio Controller [A-1]

Stockage:
Contrôleur IDE Contrôleur IDE standard double canal PCI
Contrôleur IDE Intel(R) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
Contrôleur IDE Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
Contrôleur SCSI/RAID A5XJIH9T IDE Controller
Contrôleur SCSI/RAID JMicron JMB36X Controller
Lecteur de disquettes Lecteur de disquettes
Disque dur SAMSUNG HD501LJ (465 Go, IDE)
Disque dur External Disk 0 (465 Go, IDE)
Disque dur SAMSUNG HD501LJ (465 Go, IDE)
Disque dur SAMSUNG HD501LJ (465 Go, IDE)
Disque dur Generic STORAGE DEVICE USB Device
Disque dur Generic STORAGE DEVICE USB Device
Disque dur Generic STORAGE DEVICE USB Device
Disque dur Generic STORAGE DEVICE USB Device
Lecteur optique PCNIX XA7GXIR SCSI CdRom Device
Lecteur optique PLEXTOR BD-R PX-B920SA SCSI CdRom Device
État des disques durs SMART OK

Partitions:
C: (NTFS) 117757 Mo (18164 Mo libre)
D: (NTFS) 359171 Mo (79278 Mo libre)
F: (NTFS) 476937 Mo (54430 Mo libre)
G: (NTFS) 476921 Mo (86048 Mo libre)
H: (NTFS) 476937 Mo (23534 Mo libre)
Taille totale 1863.0 Go (255.3 Go libre)

Entrée:
Clavier Microsoft USB Dual Receiver Wireless Keyboard (IntelliType Pro)
Souris Logitech HID-compliant Cordless Mouse
Souris Microsoft USB Dual Receiver Wireless Mouse (IntelliPoint)

Réseau:
Carte réseau Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller (192.168.24.2)

Périphériques:
Imprimante Canon SELPHY CP710
Imprimante doPDF v6
Imprimante HP DeskJet 970Cxi
Imprimante Microsoft Office Document Image Writer
Imprimante Microsoft XPS Document Writer
Contrôleur USB1 Intel 82801GB ICH7 - USB Universal Host Controller [A-1]
Contrôleur USB1 Intel 82801GB ICH7 - USB Universal Host Controller [A-1]
Contrôleur USB1 Intel 82801GB ICH7 - USB Universal Host Controller [A-1]
Contrôleur USB1 Intel 82801GB ICH7 - USB Universal Host Controller [A-1]
Contrôleur USB2 Intel 82801GB ICH7 - Enhanced USB2 Controller [A-1]
Périphérique USB Concentrateur USB générique
Périphérique USB Concentrateur USB générique
Périphérique USB Onduleur USB MGE
Périphérique USB Périphérique de stockage de masse USB
Périphérique USB Périphérique d'interface utilisateur USB
Périphérique USB Périphérique d'interface utilisateur USB
Périphérique USB Périphérique d'interface utilisateur USB
Périphérique USB Périphérique d'interface utilisateur USB
Périphérique USB Périphérique USB composite
Périphérique USB Périphérique USB composite
Périphérique USB Realtek RTL8187 Wireless 802.11g 54Mbps USB 2.0 Network Adapter
Batterie Batterie onduleur HID

----------------------------------------------------------------------------------------------------------
Puis le 1° log Nero :




Windows Vista 6.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.4.9.100
Internal Version: 9, 4, 9, 100

Recorder: <PLEXTOR BD-R PX-B920SA>Version: 1.03 - HA 1 TA 0 - 9.4.9.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 4096kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PLEXTOR BD-R PX-B920SA>Version: 1.03 - HA 1 TA 0 - 9.4.9.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
PLEXTOR BD-R PX-B920SA G: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 18 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.6.2010
Compilation ISO
08:21:12 #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

08:21:12 #2 Text 0 File Isodoc.cpp, Line 6998
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

08:21:12 #3 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)

08:21:12 #4 Text 0 File Burncd.cpp, Line 3572
Turn on Disc-At-Once, using Blu-ray Disc media

08:21:12 #5 Text 0 File DlgWaitCD.cpp, Line 313
Total disc capacity: 12018688 23474MB
User data to be written: 11988768 23415MB
Free space on disc: 12219392 23866MB

08:21:12 #6 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)

08:21:12 #7 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: PLEXTOR BD-R PX-B920SA, Media type: BD-R (seq)

08:21:12 #8 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================

08:21:12 #9 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 11988768 (11988768) = #11988768/2664:10.18
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11988768 blocks [G: PLEXTOR BD-R PX-B920SA]
--------------------------------------------------------------

08:21:13 #10 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [G: PLEXTOR BD-R PX-B920SA] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 24552996864, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 11988768 | 0 | 0x00
11988768 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

08:21:13 #11 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

08:21:13 #12 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

08:21:13 #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

08:21:13 #14 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.

08:21:13 #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

08:21:13 #16 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (17 980 Ko/s)

08:21:13 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

08:21:13 #18 Text 0 File Cdrdrv.cpp, Line 10168
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 5
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 18 (12 h):
1 recording layer (SL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
Recorded mark polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)


08:21:27 #19 Text 0 File BD.cpp, Line 392
Format BD-R with Format Type 0h, sub-type 0, spare area size 0 -> return code 0
Allocated spare area size on disc 196608
Allocated spare area size on disc 196608
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0

08:21:27 #20 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

09:17:30 #21 SPTI -1064 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
CDB Data: 0x2A 00 00 B4 74 00 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
Sense Area: 0xF0 00 05 00 B4 74 00 0A 2A 00 00 B4 21
Buffer x19ed38c0: Len x10000
0x7D 2D A6 3A 50 BC 1C 90 79 D8 18 80 7A A4 C3 EC
0x30 2B D4 75 C4 56 D7 BE 53 E7 FC 78 7E 82 F1 96
0x43 5B 00 31 86 9C 71 68 35 43 65 77 BB 50 09 B2

09:17:30 #22 CDR -1064 File Writer.cpp, Line 306
Invalid block address
G: PLEXTOR BD-R PX-B920SA

09:17:44 #23 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0

09:17:44 #24 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (17 980 Ko/s)

09:17:44 #25 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

09:17:50 #26 Text 0 File Cdrdrv.cpp, Line 11478
DriveLocker: UnLockVolume completed

09:17:50 #27 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
-------------------------------------------------------------------------------------------------------
Puis le 2° log Nero :




Windows Vista 6.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.4.9.100
Internal Version: 9, 4, 9, 100

Recorder: <PLEXTOR BD-R PX-B920SA>Version: 1.03 - HA 1 TA 0 - 9.4.9.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 4096kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PLEXTOR BD-R PX-B920SA>Version: 1.03 - HA 1 TA 0 - 9.4.9.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
PLEXTOR BD-R PX-B920SA G: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 18 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.6.2010
Compilation ISO
12:54:48 #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:54:49 #2 Text 0 File Isodoc.cpp, Line 6998
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:54:49 #3 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)

12:54:49 #4 Text 0 File Burncd.cpp, Line 3572
Turn on Disc-At-Once, using Blu-ray Disc media

12:54:49 #5 Text 0 File DlgWaitCD.cpp, Line 313
Total disc capacity: 12018688 23474MB
User data to be written: 11988768 23415MB
Free space on disc: 12219392 23866MB

12:54:49 #6 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)

12:54:49 #7 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: PLEXTOR BD-R PX-B920SA, Media type: BD-R (seq)

12:54:49 #8 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:54:49 #9 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 11988768 (11988768) = #11988768/2664:10.18
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11988768 blocks [G: PLEXTOR BD-R PX-B920SA]
--------------------------------------------------------------

12:54:49 #10 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [G: PLEXTOR BD-R PX-B920SA] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 24552996864, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 11988768 | 0 | 0x00
11988768 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:54:49 #11 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

12:54:49 #12 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

12:54:49 #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

12:54:49 #14 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.

12:54:49 #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

12:54:49 #16 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2x (8 990 Ko/s)

12:54:49 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:54:49 #18 Text 0 File Cdrdrv.cpp, Line 10168
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 5
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 18 (12 h):
1 recording layer (SL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
Recorded mark polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)


12:55:01 #19 Text 0 File BD.cpp, Line 392
Format BD-R with Format Type 0h, sub-type 0, spare area size 0 -> return code 0
Allocated spare area size on disc 196608
Allocated spare area size on disc 196608
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0

12:55:01 #20 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

14:37:32 #21 SPTI -1064 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
CDB Data: 0x2A 00 00 B4 74 00 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
Sense Area: 0xF0 00 05 00 B4 74 00 0A 2A 00 00 B4 21
Buffer x19ed38c0: Len x10000
0x7D 2D A6 3A 50 BC 1C 90 79 D8 18 80 7A A4 C3 EC
0x30 2B D4 75 C4 56 D7 BE 53 E7 FC 78 7E 82 F1 96
0x43 5B 00 31 86 9C 71 68 35 43 65 77 BB 50 09 B2

14:37:32 #22 CDR -1064 File Writer.cpp, Line 306
Invalid block address
G: PLEXTOR BD-R PX-B920SA

14:37:45 #23 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0

14:37:45 #24 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2x (8 990 Ko/s)

14:37:45 #25 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:37:49 #26 Text 0 File Cdrdrv.cpp, Line 11478
DriveLocker: UnLockVolume completed

14:37:49 #27 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

---------------------------------------------------------------------------------------------------
Puis le 3° log Nero :

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.4.9.100
Internal Version: 9, 4, 9, 100

Recorder: <PLEXTOR BD-R PX-B920SA>Version: 1.03 - HA 1 TA 0 - 9.4.9.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 4096kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PLEXTOR BD-R PX-B920SA>Version: 1.03 - HA 1 TA 0 - 9.4.9.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HD501LJ atapi Port 3 ID 0 DMA: On
DiskPeripheral : SAMSUNG HD501LJ atapi Port 3 ID 1 DMA: On
DiskPeripheral : External Disk 0 atapi Port 4 ID 0 DMA: Off
DiskPeripheral : SAMSUNG HD501LJ atapi Port 4 ID 1 DMA: On
CdRomPeripheral : PLEXTOR BD-R PX-B920SA1.03 JRAID Port 6 ID 0 DMA: Off
CdRomPeripheral : PCNIX XA7GXIR 1.03 akddvzi2 Port 7 ID 0 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR BD-R PX-B920SA I: CdRom0
PCNIX XA7GXIR E: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.6.2010
Compilation ISO
15:06:21 #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

15:06:21 #2 Text 0 File Isodoc.cpp, Line 6998
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:06:21 #3 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)

15:06:21 #4 Text 0 File Burncd.cpp, Line 3572
Turn on Disc-At-Once, using Blu-ray Disc media

15:06:21 #5 Text 0 File DlgWaitCD.cpp, Line 313
Total disc capacity: 12018688 23474MB
User data to be written: 11988768 23415MB
Free space on disc: 12219392 23866MB

15:06:21 #6 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)

15:06:21 #7 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: PLEXTOR BD-R PX-B920SA, Media type: BD-R (seq)

15:06:21 #8 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:06:21 #9 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 11988768 (11988768) = #11988768/2664:10.18
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11988768 blocks [I: PLEXTOR BD-R PX-B920SA]
--------------------------------------------------------------

15:06:21 #10 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [I: PLEXTOR BD-R PX-B920SA] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 24552996864, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 11988768 | 0 | 0x00
11988768 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

15:06:21 #11 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

15:06:21 #12 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

15:06:21 #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

15:06:21 #14 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.

15:06:21 #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

15:06:21 #16 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2x (8 990 Ko/s)

15:06:22 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:06:22 #18 Text 0 File Cdrdrv.cpp, Line 10168
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 5
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 18 (12 h):
1 recording layer (SL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
Recorded mark polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)


15:06:36 #19 Text 0 File BD.cpp, Line 392
Format BD-R with Format Type 0h, sub-type 0, spare area size 0 -> return code 0
Allocated spare area size on disc 196608
Allocated spare area size on disc 196608
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0

15:06:36 #20 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

17:07:09 #21 SPTI -1064 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
CDB Data: 0x2A 00 00 B4 74 00 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
Sense Area: 0xF0 00 05 00 B4 74 00 0A 2A 00 00 B4 21
Buffer x19ed38c0: Len x10000
0x7D 2D A6 3A 50 BC 1C 90 79 D8 18 80 7A A4 C3 EC
0x30 2B D4 75 C4 56 D7 BE 53 E7 FC 78 7E 82 F1 96
0x43 5B 00 31 86 9C 71 68 35 43 65 77 BB 50 09 B2

17:07:09 #22 CDR -1064 File Writer.cpp, Line 306
Invalid block address
I: PLEXTOR BD-R PX-B920SA

17:07:21 #23 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0

17:07:22 #24 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2x (8 990 Ko/s)

17:07:22 #25 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

17:07:26 #26 Text 0 File Cdrdrv.cpp, Line 11478
DriveLocker: UnLockVolume completed

17:07:26 #27 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



Aidez-moi s'il vous plait .... :praise:
the.lucky
Nouveau Membre
 
Messages: 5
Enregistré le: 08 Sep 2009


  • Publicité

Retourner vers Les graveurs CD / DVD et Blu-ray

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités

cron