gravure echouée avec Nero Premium 7

Messages d'erreur dans vos logiciels ? Besoin d'explications ou de solutions ? C'est ici qu'il vous faut poster.

gravure echouée avec Nero Premium 7

Messagepar hakim09 » 09 Déc 2005 19:01

Bonjour;
je possede un graveur de marque LG GSA-4082B, je gravais auparavent absolument tout (CD-R, CD-RW, DVD, ...) avec Nero 6, mais depuis que j'ai installer Nero 7 Premium, je ne peut pas graver les DVR-R (video), le prossus de gravage et juste après le décodage du fichier video, je vois clignoter mon graveur indiquant le commencement de l'étape de gravure mais hélas il s'arrete, ne me donnant aucune explication, doit désinstaller le Nero 7 ? SVP aidez moi ! Merci
hakim09
Nouveau Membre
 
Messages: 4
Enregistré le: 09 Déc 2005

Messagepar Scaramanga » 09 Déc 2005 19:47

Peux tu nous coller le fichier log de Nero ?
( supprem en le numéro de série avant de le publier !)
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14171
Enregistré le: 05 Sep 2002

Messagepar hakim09 » 09 Déc 2005 20:06

merci pour ton initiative pour m'aider, comment je fais pour t'envoyer le fichier log ?
hakim09
Nouveau Membre
 
Messages: 4
Enregistré le: 09 Déc 2005

Messagepar Scaramanga » 09 Déc 2005 20:16

Le fichier log de ero est un fichier texte qui consigne tout les événements du processus de gravure, d'ou sont interet quand quelque chose daube.
Ce fichier ce nomne NeroHistory.log et ce trouve dans le dossier d'installation de Nero ( C:\Program Files\Ahead\Nero , par exemple).
Tu peux l'ouvrir avec BlocNote.

Pour info : Définition du fichier log
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14171
Enregistré le: 05 Sep 2002

Messagepar hakim09 » 09 Déc 2005 20:51

encore une fois merci, voici le contenu du fichier Log de Nero.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 10MB (10328kB)
Memory in use : 98
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.11.2005
NeroAPI
10:47:47 #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

10:47:47 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

10:47:47 #3 Text 0 File Reader.cpp, Line 124
Reader running

10:47:47 #4 Text 0 File Writer.cpp, Line 113
Writer G: HL-DT-ST DVDRAM GSA-4082B running

10:47:47 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

10:47:47 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

10:47:47 #7 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

10:47:47 #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1930335 (428:57.60, 3770MB)

10:47:47 #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

10:47:47 #10 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

10:47:47 #11 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:47:47 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1930336 (1930336) = #1930336/428:57.61
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1930336 blocks [G: HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------

10:47:47 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [G: HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3953328128, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1930336 | lead-out | 1 | 0x41 | 0x00

10:47:47 #14 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:47:49 #15 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

10:47:49 #16 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

10:47:49 #17 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

10:47:49 #18 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5 540 Ko/s)

10:47:49 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:47:49 #20 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode

10:47:49 #21 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

10:47:49 #22 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

10:47:49 #23 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:48:42 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x02e40000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

10:48:42 #25 CDR -1135 File Writer.cpp, Line 302
Write error
G: HL-DT-ST DVDRAM GSA-4082B

10:48:42 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:48:42 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:48:42 #28 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1

10:48:42 #29 CDR -1135 File WriterStatus.cpp, Line 167
Write error
G: HL-DT-ST DVDRAM GSA-4082B

10:48:42 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

10:48:42 #31 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 4x (5 540 Ko/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 21MB (21748kB)
Memory in use : 95
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.11.2005
NeroAPI
14:21:01 #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

14:21:01 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

14:21:01 #3 Text 0 File Reader.cpp, Line 124
Reader running

14:21:01 #4 Text 0 File Writer.cpp, Line 113
Writer G: HL-DT-ST DVDRAM GSA-4082B running

14:21:01 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

14:21:01 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

14:21:01 #7 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

14:21:01 #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1930319 (428:57.44, 3770MB)

14:21:01 #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

14:21:01 #10 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

14:21:01 #11 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:21:01 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1930320 (1930320) = #1930320/428:57.45
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1930320 blocks [G: HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------

14:21:01 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [G: HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3953295360, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1930320 | lead-out | 1 | 0x41 | 0x00

14:21:01 #14 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

14:21:02 #15 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

14:21:02 #16 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

14:21:02 #17 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

14:21:02 #18 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5 540 Ko/s)

14:21:02 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:21:02 #20 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode

14:21:02 #21 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

14:21:02 #22 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

14:21:02 #23 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14:21:28 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x02e50000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

14:21:28 #25 CDR -1135 File Writer.cpp, Line 302
Write error
G: HL-DT-ST DVDRAM GSA-4082B

14:21:28 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14:21:29 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

14:21:29 #28 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1

14:21:29 #29 CDR -1135 File WriterStatus.cpp, Line 167
Write error
G: HL-DT-ST DVDRAM GSA-4082B

14:21:29 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

14:21:29 #31 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 4x (5 540 Ko/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 25MB (26396kB)
Memory in use : 94
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.11.2005
NeroAPI
17:25:38 #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

17:25:38 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

17:25:38 #3 Text 0 File Reader.cpp, Line 124
Reader running

17:25:38 #4 Text 0 File Writer.cpp, Line 113
Writer G: HL-DT-ST DVDRAM GSA-4082B running

17:25:38 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

17:25:39 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

17:25:39 #7 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

17:26:28 #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1930319 (428:57.44, 3770MB)

17:26:28 #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

17:26:28 #10 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

17:26:28 #11 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: inconnu. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM.)

17:26:28 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1930320 (1930320) = #1930320/428:57.45
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1930320 blocks [G: HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------

17:26:28 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [G: HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3953295360, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1930320 | lead-out | 1 | 0x41 | 0x00

17:26:28 #14 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:26:28 #15 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

17:26:28 #16 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

17:26:28 #17 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

17:26:28 #18 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5 540 Ko/s)

17:26:28 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:26:28 #20 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode

17:26:28 #21 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

17:26:28 #22 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

17:26:28 #23 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:26:47 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x02e40000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

17:26:47 #25 CDR -1135 File Writer.cpp, Line 302
Write error
G: HL-DT-ST DVDRAM GSA-4082B

17:26:47 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17:26:47 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

17:26:47 #28 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1

17:26:47 #29 CDR -1135 File WriterStatus.cpp, Line 167
Write error
G: HL-DT-ST DVDRAM GSA-4082B

17:26:47 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

17:26:47 #31 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 4x (5 540 Ko/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
Hakim
Privé
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.01 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 386MB (396064kB)
Memory in use : 24
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.11.2005
CueSheet
17:30:20 #1 Text 0 File Burncd.cpp, Line 3007
HL-DT-ST DVDRAM GSA-4082B
Protection contre les ruptures activés

17:30:20 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

17:30:20 #3 Text 0 File Reader.cpp, Line 124
Reader running

17:30:20 #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using CD-R/RW media

17:30:40 #5 Phase 40 File dlgbrnst.cpp, Line 1724
Aborted by user

17:30:40 #6 Text 0 File DlgWaitCD.cpp, Line 277
Disc check failed: Medium not allowed (Wrong CD)

17:30:40 #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

17:30:40 #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-4082B
Medium not present

17:30:40 #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD-R. Medium required by compilation: CD-R/RW.)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Hakim
Privé
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.01 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 303MB (310712kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.11.2005
Compilation ISO
17:32:07 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

17:32:07 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

17:32:07 #3 Text 0 File Reader.cpp, Line 124
Reader running

17:32:07 #4 Text 0 File Writer.cpp, Line 113
Writer G: HL-DT-ST DVDRAM GSA-4082B running

17:32:07 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

17:32:07 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

17:32:08 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 31839 ( 7:04.39, 62MB)

17:32:08 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

17:32:08 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

17:32:08 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:32:08 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 31840 (31840) = #31840/7:4.40
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 31840 blocks [G: HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------

17:32:08 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [G: HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 65208320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
31840 | lead-out | 1 | 0x41 | 0x00

17:32:08 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:32:08 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

17:32:08 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

17:32:08 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

17:32:08 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5 540 Ko/s)

17:32:08 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:32:08 #19 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode for Multisession

17:32:08 #20 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

17:32:08 #21 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

17:32:08 #22 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:32:23 #23 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x04784600: Len xc

17:32:23 #24 SPTI -1064 File SCSIPassThrough.cpp, Line 306
CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 2A 00 00 0C 21 02
Buffer x04f40000: Len x10000
0x22 00 20 00 00 00 00 00 00 20 00 08 00 00 00 00
0x08 00 68 0C 12 08 19 34 04 02 00 00 01 00 00 01
0x01 00 22 00 17 00 00 00 00 00 00 17 00 28 00 00

17:32:23 #25 CDR -1064 File Writer.cpp, Line 302
Invalid block address
G: HL-DT-ST DVDRAM GSA-4082B

17:32:23 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17:32:24 #27 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 31

17:32:26 #28 Phase 133 File dlgbrnst.cpp, Line 1724
Writing short lead-out

17:32:26 #29 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5 540 Ko/s)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Hakim
Privé
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.01 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 275MB (282364kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.11.2005
Image CD
17:47:40 #1 Text 0 File Burncd.cpp, Line 3007
HL-DT-ST DVDRAM GSA-4082B
Protection contre les ruptures activés

17:47:40 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

17:47:40 #3 Text 0 File Reader.cpp, Line 124
Reader running

17:47:40 #4 Text 0 File Burncd.cpp, Line 3301
Turn on Track-At-Once, using CD-R/RW media

17:47:57 #5 Phase 40 File dlgbrnst.cpp, Line 1724
Aborted by user

17:47:57 #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

17:47:57 #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-4082B
Medium not present

17:47:57 #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: inconnu. Medium required by compilation: CD-R/RW.)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Hakim
Privé
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.01 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 275MB (281916kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.11.2005
Image CD
17:48:45 #1 Text 0 File Burncd.cpp, Line 3007
HL-DT-ST DVDRAM GSA-4082B
Protection contre les ruptures activés

17:48:45 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

17:48:45 #3 Text 0 File Reader.cpp, Line 124
Reader running

17:48:45 #4 Text 0 File Burncd.cpp, Line 3301
Turn on Track-At-Once, using CD-R/RW media

17:48:49 #5 Phase 40 File dlgbrnst.cpp, Line 1724
Aborted by user

17:48:49 #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

17:48:49 #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-4082B
Medium not present

17:48:49 #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: inconnu. Medium required by compilation: CD-R/RW.)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Hakim
Privé
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.01 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 275MB (282236kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.11.2005
Image CD
17:49:30 #1 Text 0 File Burncd.cpp, Line 3007
HL-DT-ST DVDRAM GSA-4082B
Protection contre les ruptures activés

17:49:30 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

17:49:30 #3 Text 0 File Reader.cpp, Line 124
Reader running

17:49:30 #4 Text 0 File Burncd.cpp, Line 3301
Turn on Track-At-Once, using CD-R/RW media

17:49:44 #5 Phase 40 File dlgbrnst.cpp, Line 1724
Aborted by user

17:49:44 #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

17:49:44 #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-4082B
Medium not present

17:49:44 #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: inconnu. Medium required by compilation: CD-R/RW.)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Hakim
Privé
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.01 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 274MB (281500kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.11.2005
Image CD
17:50:20 #1 Text 0 File Burncd.cpp, Line 3007
HL-DT-ST DVDRAM GSA-4082B
Protection contre les ruptures activés

17:50:20 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

17:50:20 #3 Text 0 File Reader.cpp, Line 124
Reader running

17:50:20 #4 Text 0 File Burncd.cpp, Line 3301
Turn on Track-At-Once, using CD-R/RW media

17:50:30 #5 Phase 40 File dlgbrnst.cpp, Line 1724
Aborted by user

17:50:30 #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

17:50:30 #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-4082B
Medium not present

17:50:30 #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: inconnu. Medium required by compilation: CD-R/RW.)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Hakim
Privé
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST CD-RW GCE-8524B>Version: 1.00 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.01 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 200MB (205700kB)
Memory in use : 60
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.11.2005
Image CD
17:51:13 #1 Text 0 File Burncd.cpp, Line 3007
HL-DT-ST CD-RW GCE-8524B
Protection contre les ruptures activés

17:51:13 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

17:51:13 #3 Text 0 File Reader.cpp, Line 124
Reader running

17:51:13 #4 Text 0 File Writer.cpp, Line 113
Writer F: HL-DT-ST CD-RW GCE-8524B running

17:51:14 #5 Text 0 File Burncd.cpp, Line 3301
Turn on Track-At-Once, using CD-R/RW media

17:51:14 #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 291422 ( 64:47.47)

17:51:14 #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

17:51:14 #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST CD-RW GCE-8524B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

17:51:14 #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:51:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 291423 (291423) = #291423/64:45.48
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 291421 blocks [F: HL-DT-ST CD-RW GCE-8524B]
--------------------------------------------------------------

17:51:14 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: HL-DT-ST CD-RW GCE-8524B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 597141504, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
291423 | lead-out | 1 | 0x41 | 0x00

17:51:14 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1126
Removed 2 run-out blocks from end of track 1. Length: 291423 -> 291421.

17:51:14 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:51:14 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

17:51:14 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

17:51:14 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

17:51:14 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 52x (7 800 Ko/s)

17:51:14 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

17:51:14 #19 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

17:53:19 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17:53:23 #21 Text 0 File MMC.cpp, Line 16273
<HL-DT-STCD-RW GCE-8524B > start Close Session

17:53:38 #22 Phase 37 File dlgbrnst.cpp, Line 1724
Burn process completed successfully at 52x (7 800 Ko/s)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Hakim
Privé
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST CD-RW GCE-8524B>Version: 1.00 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.01 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 253MB (259852kB)
Memory in use : 50
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.12.2005
CD-ROM (ISO)
18:41:13 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:41:13 #2 Text 0 File Burncd.cpp, Line 3007
HL-DT-ST CD-RW GCE-8524B
Protection contre les ruptures activés

18:41:13 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

18:41:13 #4 Text 0 File Reader.cpp, Line 124
Reader running

18:41:13 #5 Text 0 File Writer.cpp, Line 113
Writer F: HL-DT-ST CD-RW GCE-8524B running

18:41:13 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

18:41:13 #7 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using CD-R/RW media

18:41:14 #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 188046 ( 41:49.21)

18:41:14 #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

18:41:14 #10 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST CD-RW GCE-8524B;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

18:41:14 #11 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:41:14 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 188047 (188047) = #188047/41:47.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 188047 blocks [F: HL-DT-ST CD-RW GCE-8524B]
--------------------------------------------------------------

18:41:14 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: HL-DT-ST CD-RW GCE-8524B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 385427456, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
188047 | lead-out | 1 | 0x41 | 0x00

18:41:14 #14 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:41:14 #15 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

18:41:14 #16 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

18:41:14 #17 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

18:41:14 #18 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 52x (7 800 Ko/s)

18:41:14 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:41:14 #20 Text 0 File MMC.cpp, Line 16828
StartDAO : CD-Text - Off

18:41:14 #21 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

18:41:14 #22 Text 0 File MMC.cpp, Line 17059
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 29 31 16

18:42:56 #23 Text 0 File WriterStatus.cpp, Line 116
<F: HL-DT-ST CD-RW GCE-8524B> start writing Lead-Out at LBA 188047 (2DE8Fh), length 0 blocks

18:42:56 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:43:02 #25 Phase 37 File dlgbrnst.cpp, Line 1724
Burn process completed successfully at 52x (7 800 Ko/s)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Hakim
Privé
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST CD-RW GCE-8524B>Version: 1.00 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.01 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 127MB (130368kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.12.2005
CD Copy
19:03:34 #1 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:03:34 #2 Text 0 File Burncd.cpp, Line 3007
HL-DT-ST CD-RW GCE-8524B
Protection contre les ruptures activés

19:03:34 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

19:03:34 #4 Text 0 File Reader.cpp, Line 124
Reader running

19:03:34 #5 Text 0 File Writer.cpp, Line 113
Writer F: HL-DT-ST CD-RW GCE-8524B running

19:03:34 #6 Phase 48 File dlgbrnst.cpp, Line 1724
Analyzing disc

19:03:34 #7 CDCOPY -1 File CDCopy.cpp, Line 1915
The CD is copyrighted

19:03:34 #8 Text 0 File CDCopy.cpp, Line 2131
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 297818 297817 ( 66:12.67)

19:03:34 #9 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 297818 = 297818, data (TRM_DATA_MODE2_FORM1_NOSUB, block size 2048)

19:03:34 #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using CD-R/RW media

19:03:35 #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 297817 ( 66:12.67)

19:03:35 #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

19:03:35 #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST CD-RW GCE-8524B;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

19:03:35 #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:03:35 #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_FORM1_NOSUB (1 - Données (mode 2))
2 indices, index0 (150) not provided
original disc pos #0 + 297818 (297818) = #297818/66:10.68
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 297818 blocks [F: HL-DT-ST CD-RW GCE-8524B]
--------------------------------------------------------------

19:03:35 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: HL-DT-ST CD-RW GCE-8524B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 700820736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
297818 | lead-out | 1 | 0x41 | 0x00

19:03:35 #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:03:36 #18 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 52x (7 800 Ko/s)

19:03:36 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:03:36 #20 Text 0 File MMC.cpp, Line 16828
StartDAO : CD-Text - Off

19:03:36 #21 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

19:03:36 #22 Text 0 File MMC.cpp, Line 17059
CueData, Len=32
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 aa 01 34 00 42 0c 44

19:08:06 #23 SPTI -1047 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 00 00 04 8B 58 00 00 01 00 00 00
Sense Area: 0xF0 00 05 00 04 8B 58 0A 00 00 00 00 64
Buffer x07398000: Len x800

19:08:06 #24 Text 0 File TrackPFile.cpp, Line 252
Read error -1047 at address 297816, end of track -> ignore error

19:08:35 #25 Text 0 File WriterStatus.cpp, Line 116
<F: HL-DT-ST CD-RW GCE-8524B> start writing Lead-Out at LBA 297818 (48B5Ah), length 0 blocks

19:08:35 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19:08:47 #27 Phase 37 File dlgbrnst.cpp, Line 1724
Burn process completed successfully at 52x (7 800 Ko/s)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
5c80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8523B E: CDRom0
HL-DT-ST CD-RW GCE-8524B F: CDRom1
HL-DT-ST DVDRAM GSA-4082B G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physica
hakim09
Nouveau Membre
 
Messages: 4
Enregistré le: 09 Déc 2005

Messagepar skander14 » 09 Déc 2005 23:30

Bonsoir
je ne suis pas trop spécialiste des logs de Nero mais déja mets tes lecteurs graveurs en DMA :

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8524B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B IdeChnDr Port 1 ID 1 DMA: Off

ici http://www.gravure-news.com/html/tuto/03/page01.php

A+
Config : XPproSP3, core2 duo E8400, 2Go de RAM 6400, Liteon LTD163, Toshiba 1612, Plextor Premium (1.06), Plextor PX755A (1.05 ), Benq 1640 (BSLB), Benq 1655 (BCDB), Benq 1650 (BCIC), Liteon LTR-52327S (QSOE), Liteon SHM-165P6S (MSOR), Samsung SH-203B (SB01)
skander14
Ours en Peluche
Membre permanent
 
Messages: 994
Enregistré le: 24 Fév 2005
Localisation: Ailleurs



  • Publicité

Retourner vers Logiciels de gravure

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités

cron