Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-S182D>Version: SB03 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW SH-S182D>Version: SB03 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR STM3250820AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorpCD/DVDW SH-S182DSB03 JRAID Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182D D: CDRom0
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095528kB)
Free physical memory: 1502MB (1538112kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.3.2007
Compilation ISO
11:24:36 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:24:37 #2 Text 0 File Isodoc.cpp, Line 6527
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:24:37 #3 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)
11:24:37 #4 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media
11:24:37 #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1074543 (238:47.18, 2098MB)
11:24:37 #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
11:24:37 #7 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: TSSTcorp CD/DVDW SH-S182D, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
11:24:37 #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:24:37 #9 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1074544 (1074544) = #1074544/238:47.19
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1074544 blocks [D: TSSTcorp CD/DVDW SH-S182D]
--------------------------------------------------------------
11:24:37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [D: TSSTcorp CD/DVDW SH-S182D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2200666112, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1074544 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1074544 | 0 | 0x00
1074544 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:24:37 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:24:37 #12 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started
11:24:37 #13 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.
11:24:37 #14 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed
11:24:37 #15 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 4x (5 540 Ko/s)
11:24:37 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:24:37 #17 Text 0 File Cdrdrv.cpp, Line 9288
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:24:37 #18 Text 0 File Cdrdrv.cpp, Line 9288
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:24:37 #19 Text 0 File Cdrdrv.cpp, Line 9288
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:24:37 #20 Text 0 File DVDR.cpp, Line 8107
Drive: TSSTcorp CD/DVDW SH-S182D
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:24:37 #21 CDR -1207 File DVDR.cpp, Line 6212
Book Type automatically set to: DVD-ROM
11:24:37 #22 Phase 98 File dlgbrnst.cpp, Line 1760
Start formatting disc before burning
11:24:37 #23 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0x04 11 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x0685a7c0: Len xc
0x00 82 00 08 00 23 05 40 98 00 00 00
11:24:37 #24 Phase 101 File dlgbrnst.cpp, Line 1760
Formatting disc failed
11:24:37 #25 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
11:24:37 #26 CDR -1065 File ThreadedTransferInterface.cpp, Line 1785
Invalid command
D: TSSTcorp CD/DVDW SH-S182D
11:24:37 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1785
Could not perform start of Disc-at-once
11:24:37 #28 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 4x (5 540 Ko/s)
11:24:37 #29 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:24:40 #30 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed
11:24:40 #31 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Voila si quelqu'un peut m'aider a resoudre le probleme sa serait vraiment sympa. Je vous remercie par avance pour vos réponses
Flux RSS