Gravure-News

[Fork]

Bonjour, j'ai un graveur TDK Cycole TDK 241040b et impossible de graver un cd. j'explique ...

depuis l'intall de xp svpack 2 je ne pouvait plus graver, en cherchant un peu partout (UDMA 2 et non PIO, désactivation de la gravure Xp ...) j'ai réussi à graver plusieurs CD r et rw. j'ai pensé qu'il s'agissait de daemon (émulateur lecteur virtuel) qui mettait la zone.

et la j'ai de nouveau le problème (j'ai pas de lecteur virtuel), c'est à devenir fou. et ce quelque soit le soft de gravage. clone cd, cdburner cp pro, et nero (différentes version).

je me suis dit, je vais acheter un graveur DVD et le tour est joué, mais j'aimerais bien savoir ce qui se passe, question de principe ...

je vous joint le logs généré par nero, merci pour votre aide :

lucem

[mod="Maverick"]Evites de mettre le n° de série de ton Ligiciel dans les posts [/mod]

XXXXXXXXXXXXXXXXXXXXXXXXXXXX

Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.45, size=172099 bytes, created 05/10/2004 19:24:42
Nero Version: 5.5.7.8
Recorder: <TDK CDRW241040B> Version: 57S2 - HA 3 TA 0 - 5.5.7.8
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <TDK CDRW241040B> Version: 57S2 - HA 3 TA 0 - 5.5.7.8
Adapter driver: <atapi> HA 3
Bus Type : default (0) -> ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST320423A atapi Port 0 ID 0 DMA: On
DiskPeripheral : HDS722580VLAT20 atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y120M0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TDK CDRW241040B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 3 ID 1 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1022MB (1047276kB)
Free physical memory: 671MB (687936kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off

CD-ROM (ISO)
21.12.2004

18:40:54 #1 Phase 90 File dlgbrnst.cpp, Line 1438
Buffer Underrun Protection activated

18:40:54 #2 Text 0 File Reader.cpp, Line 118
Reader running

18:40:54 #3 Text 0 File Writer.cpp, Line 127
Writer TDK CDRW241040B running

18:40:54 #4 Text 0 File Burncd.cpp, Line 2621
Turn on Track-At-Once, using CD-R/RW media

18:40:54 #5 ISO9660GEN -11 File geniso.cpp, Line 4381
First writeable address = 0 (0x00000000)

18:40:54 #6 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 331297 (331297) = #331297/73:37.22
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

18:40:56 #7 Text 0 File DlgWaitCD.cpp, Line 196
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 331299 (73:39.24)

18:40:58 #8 Text 0 File DlgWaitCD.cpp, Line 1338
Recorder: TDK CDRW241040B;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A BC, 2: 26 B2 26, 3: 00 80 80 (invalid)

18:41:01 #9 Text 0 File ThreadedTransferInterface.cpp, Line 834
Prepare recorder TDK CDRW241040B for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 678803456

18:41:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 862
Removed 2 run-out blocks from end of track 1.

18:41:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 331297 (331297) = #331297/73:37.22
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 331295 blocks [TDK CDRW241040B ]
--------------------------------------------------------------

18:41:01 #12 Phase 32 File dlgbrnst.cpp, Line 1438
Simulation started at 10x (1 500 KB/s)

18:41:01 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1960
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

18:41:01 #14 Text 0 File Mmc.cpp, Line 15663
Set BUFE: supported -> ON

18:43:00 #15 SCSI -1135 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x028DC9EC
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0xD9 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

18:43:00 #16 mmc -1135 File Writer.cpp, Line 321
Write error

18:43:00 #17 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

18:43:01 #18 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

18:43:01 #19 CDR -201 File WriterStatus.cpp, Line 145
Invalid writestate

18:43:01 #20 TRANSFER -18 File WriterStatus.cpp, Line 145
Could not perform EndTrack

18:43:03 #21 Phase 34 File dlgbrnst.cpp, Line 1438
Simulation failed at 10x (1 500 KB/s)

18:43:04 #22 Text 0 File Scsicmd.cpp, Line 368
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:

[Scaramanga]

Bonjour et bienvenue sur le forum de Gravure-News,

Code: Tout sélectionner

Nero Version: 5.5.7.8

Met ta version à jour , et test de nouveau.
http://www.gravure-news.com/download/58.php

[Fork]

Tout d'abord joyeux à tous ...

J'ai upgradé mon nero en 6.3.1.25 et toujours pareil :

lucem

[edité par scaramanga: supression clé....]

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Nero version: 6.3.1.25 (Nero Express)
Recorder: <TDK CDRW241040B> Version: 57S2 - HA 3 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG DVD-ROM SD-616Q >Version: F403 - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : ST320423A atapi Port 0 ID 0 DMA: On
DiskPeripheral : HDS722580VLAT20 atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y120M0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TDK CDRW241040B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
TDK CDRW241040B F: CDRom0
SAMSUNG DVD-ROM SD-616Q G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047276kB)
Free physical memory: 721MB (739276kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.12.2004
CD-ROM (ISO)
17:23:14 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

17:23:14 #2 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated

17:23:14 #3 Text 0 File Reader.cpp, Line 126
Reader running

17:23:14 #4 Text 0 File Writer.cpp, Line 124
Writer TDK CDRW241040B running

17:23:14 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

17:23:15 #6 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using CD-R/RW media

17:23:15 #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 8898 ( 2:00.48)

17:23:15 #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

17:23:15 #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: TDK CDRW241040B;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A BC, 2: 26 B2 26, 3: 00 80 80 (invalid)

17:23:15 #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:23:15 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 8899 (8899) = #8899/1:58.49
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 8897 blocks [TDK CDRW241040B ]
--------------------------------------------------------------

17:23:15 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TDK CDRW241040B ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 18532352, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
8899 | lead-out | 1 | 0x00 | 0x41

17:23:15 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 8899 -> 8897.

17:23:15 #14 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

17:23:15 #15 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

17:23:15 #16 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

17:23:15 #17 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 10x (1 500 KB/s)

17:23:15 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:23:15 #19 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON

17:31:15 #20 SCSI -1106 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0A930000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

17:31:15 #21 CDR -1106 File Writer.cpp, Line 304
Power calibration error

17:31:15 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

17:31:15 #23 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
TDK CDRW241040B\H3 T0

17:31:15 #24 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack

17:31:15 #25 Text 0 File Mmc.cpp, Line 15480
<TDK CDRW241040B > start Close Session

17:31:15 #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

17:31:15 #27 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 10x (1 500 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 07:59:42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

[Fork]

il manque un noël à mon joyeux

[pseudo555]

la derniere en date est la 6.6.0.3 ...
vire ton serial code

[Scaramanga]

Tu graves un CD multissessions ?

Finalize CD : FALSE
Multisession : TRUE