memoire tampon

Messages d'erreur dans vos logiciels ? Besoin d'explications ou de solutions ? C'est ici qu'il vous faut poster.

memoire tampon

Messagepar bendit » 28 Nov 2004 11:16

j'ai lu pas mal de posts sur le sujet j'ai essayé les solutions (sans doute mal) car j'ai toujours echec gravure
j'ai du formater recemment depuis rien ne va plus
à 57% la mémoire chute et c l'echec
memoire vive standart 768
vive maximale 1 go DDR SDRAM
voilà une copie de mon niveau de mémoire
taille personalisée:taille initiale :768
taille maximale 1536
taille maximale totale du fichier d'echange
minimale autorisée 2 mo
recommandée 763
allouée 768
comme recommandée j'ai desactivé le sevice com
et enfin le log

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12
Version de Nero : 6.6.0.1
Graveur : <SONY DVD RW DW-U50A> Version: 1.5f - HA 1 TA 0 - 6.6.0.1
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <SONY DVD RW DW-U50A >Version: 1.5f - HA 1 TA 0 - 6.6.0.1
Pilote d'adaptateur :<atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23EA-40 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U50A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DW-U50A E: CDRom0
AXV CD/DVD-ROM G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (521652kB)
Free physical memory: 217MB (222496kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.11.2004
CueSheet
18:01:39 #1 Text 0 File Burncd.cpp, Line 2832
SONY DVD RW DW-U50A
Power-Burn activés

18:01:39 #2 Text 0 File Reader.cpp, Line 127
Reader running

18:01:39 #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-U50A running

18:01:39 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disque entier, using CD-R/RW media

18:01:40 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 322463 ( 71:41.3

18:01:40 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

18:01:40 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY DVD RW DW-U50A;
CDRW code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

18:01:40 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:01:40 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 322464 (322464) = #322464/71:39.39
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 322464 blocks [SONY DVD RW DW-U50A]
--------------------------------------------------------------

18:01:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [SONY DVD RW DW-U50A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 753626304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
322464 | lead-out | 1 | 0x00 | 0x41

18:01:40 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Début de mise en cache des fichiers

18:01:40 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

18:01:40 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Cache des fichiers terminé

18:01:40 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Début de gravure à 8x (1 200 Ko/s)

18:01:40 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:01:40 #16 Text 0 File Mmc.cpp, Line 16025
StartDAO : CD-Text - Off

18:01:40 #17 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Power-Burn -> ON

18:01:40 #18 Text 0 File Mmc.cpp, Line 16312
CueData, Len=32
41 00 00 24 00 00 00 00
41 01 00 20 00 00 00 00
41 01 01 20 00 00 02 00
41 aa 01 24 00 47 29 27

18:01:43 #19 Text 0 File Cdrdrv.cpp, Line 1284
18:01:43.796 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

18:02:09 #20 Text 0 File Cdrdrv.cpp, Line 1284
18:02:09.234 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

18:10:18 #21 TRANSFER -25 File Reader.cpp, Line 380
Erreur de lecture des données

18:10:18 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:10:18 #23 SCSI -1013 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x09
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x03 0x02 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x09

18:10:18 #24 CDR -1013 File WriterStatus.cpp, Line 167
Sous-alimentation de tampon

18:10:18 #25 TRANSFER -24 File WriterStatus.cpp, Line 167
Impossible d'effectuer la fonction Disc At Once

18:10:18 #26 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

18:10:18 #27 Phase 38 File dlgbrnst.cpp, Line 1853
La gravure a échoué à 8x (1 200 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13/09/2004 11:54:06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13/09/2004 11:54:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13/09/2004 11:58:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for rec)

voila Aidez-moi!!!! merci à tous

Revenir en haut


Montrer les messages depuis:
bendit
Nouveau Membre
 
Messages: 5
Enregistré le: 04 Mar 2004


  • Publicité

Retourner vers Logiciels de gravure

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités

cron