Gravure-News

[huskydo]

bonsoir a tous

je suis newbie en pc
et je tente de graver un dvd , mais a chaque fois , ca me marque

"la gravure a echoué " , j'ai parcouru , un peu le forum , et , j'ai suivi quelques conseil , je precise que je tente de graver avec nero ! donc
j'ai desactiver la fontion de gravure de windows ( suis sous xp familial )
au paravant la gravure s'arreté a 30 % , depuis que je l'ai desactiver , ca stop a 55 % ! j'ai reduit ma vitesse de gavure , mais ca ne change rien ! :
donc je permet de vous trasmettre le message que m'as rendu nero !




Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:04
Version de Nero : 6.3.0.6
Graveur : <PHILIPS DVDR824P> Version: P2.1 - HA 1 TA 0 - 6.3.0.6
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <PHILIPS DVDR824P >Version: P2.1 - HA 1 TA 0 - 6.3.0.6
Pilote d'adaptateur :<atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-22HEA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00FRA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PHILIPS DVDR824P atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00FJA0 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
PHILIPS DVDR824P D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 432MB (443268kB)
Memory in use : 15 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.10.2004
===== Disc-Copy over image - 1st step : Copy to image ...

18:46:14 #1 Text 0 File Reader.cpp, Line 118
Reader running

18:46:14 #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

18:46:14 #3 Text 0 File DVDCopy.cpp, Line 253
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2264688 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

18:46:14 #4 Text 0 File DVDCopy.cpp, Line 345
Max -1 tracks of 1 allowed to copy
1: 0 - 2264688 = 2264688, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

18:46:14 #5 Text 0 File Burncd.cpp, Line 3101
Turn on Disque entier, using DVD media

18:46:14 #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2264687 (503:15.62, 4423MB)

18:46:14 #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

18:46:14 #8 Text 0 File DlgWaitCD.cpp, Line 2100
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

18:46:14 #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:46:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 809
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Données (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2264688 (2264688) = #2264688/503:15.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2264688 blocks [ Image Recorder ]
--------------------------------------------------------------

18:46:14 #11 Text 0 File ThreadedTransferInterface.cpp, Line 978
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4638388224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2264688 | lead-out | 1 | 0x00 | 0x41

18:46:14 #12 Phase 120 File dlgbrnst.cpp, Line 1802
Création d'une image pour la gravure

18:46:14 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2294
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:57:48 #14 SCSI -1128 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A11000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x17 0x47 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x11 0x00

18:57:48 #15 SCSI -1128 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A11000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x17 0x47 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x11 0x00

18:57:48 #16 TRANSFER -25 File Reader.cpp, Line 371
Erreur de lecture des données

18:57:49 #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:57:50 #18 Phase 67 File dlgbrnst.cpp, Line 1802
La gravure a échoué



===== Disc-Copy over image - 2nd step : Burn the image ...

18:46:14 #1 Text 0 File Reader.cpp, Line 118
Reader running

18:46:14 #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

18:46:14 #3 Text 0 File DVDCopy.cpp, Line 253
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2264688 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

18:46:14 #4 Text 0 File DVDCopy.cpp, Line 345
Max -1 tracks of 1 allowed to copy
1: 0 - 2264688 = 2264688, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

18:46:14 #5 Text 0 File Burncd.cpp, Line 3101
Turn on Disque entier, using DVD media

18:46:14 #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2264687 (503:15.62, 4423MB)

18:46:14 #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

18:46:14 #8 Text 0 File DlgWaitCD.cpp, Line 2100
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

18:46:14 #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:46:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 809
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Données (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2264688 (2264688) = #2264688/503:15.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2264688 blocks [ Image Recorder ]
--------------------------------------------------------------

18:46:14 #11 Text 0 File ThreadedTransferInterface.cpp, Line 978
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4638388224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2264688 | lead-out | 1 | 0x00 | 0x41

18:46:14 #12 Phase 120 File dlgbrnst.cpp, Line 1802
Création d'une image pour la gravure

18:46:14 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2294
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:57:48 #14 SCSI -1128 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A11000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x17 0x47 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x11 0x00

18:57:48 #15 SCSI -1128 File Cdrdrv.cpp, Line 1439
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A11000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x17 0x47 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x11 0x00

18:57:48 #16 TRANSFER -25 File Reader.cpp, Line 371
Erreur de lecture des données

18:57:49 #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:57:50 #18 Phase 67 File dlgbrnst.cpp, Line 1802
La gravure a échoué


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 28/08/2001 14:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

voila une ame charitable ,a une soluce pour moi, je l'en remercie d'avance !!



merci

huskydo