Gravure-News

[Tigrou en wheel tut tut]

Bonjour est merci pour l'aide que vous allez m'apporter.

Voila donc j'ais dernierement l'achat d'un graveur 812 s et depuis je n'arrive pas a graver un dvd ( ca revient cher a force d'en planter)

Donc g mis a jour le driver de la nappe ide nvidia.

Quand je regarde si le dma est activé voila ca me donne :





Hors quand j'utilise nero info tool's et meme les log de gravure manqué apparament le dma est pas activé



Alors avec un verbatim dvd+r g reussi a faire une gravure mais elle a mis 9h et des poussiere et avec les dvd-r impossible dans reussir une.

Voici les log

dvd+r 9h de gravure:


Tigrou

xxxx-xxxx-xxxx-xxxx-xxxx-xxxx

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
Version de Nero : 6.3.0.3
Graveur : <LITE-ON DVDRW SOHW-812S> Version: US0N - HA 2 TA 0 - 6.3.0.3
Pilote d'adaptateur :<> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM : <TOSHIBA DVD-ROM SD-M1612>Version: 1004 - HA 1 TA 0 - 6.3.0.3
Pilote d'adaptateur :<nvatabus> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722512VLSA80 V33O si3112r Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD200EB-00CSF0 nvatabus Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 nvatabus Port 1 ID 1 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-812S nvatabus Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1612 I: CDRom0
LITE-ON DVDRW SOHW-812S J: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 639MB (654364kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.6.2004
Compilation UDF/ISO
01:23:21 #1 Phase 112 File dlgbrnst.cpp, Line 1800
Réallocation des fichiers DVD-Vidéo commencée

01:23:21 #2 Phase 114 File dlgbrnst.cpp, Line 1800
Réallocation des fichiers DVD-Vidéo achevée (aucun fichier modifié)

01:23:21 #3 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

01:23:21 #4 Phase 111 File dlgbrnst.cpp, Line 1800
Classement des fichiers DVD-Vidéo

01:23:22 #5 Text 0 File Reader.cpp, Line 118
Reader running

01:23:22 #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-812S running

01:23:22 #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

01:23:22 #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

01:23:22 #9 Text 0 File Burncd.cpp, Line 3101
Turn on Disque entier, using DVD media

01:23:22 #10 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

01:23:22 #11 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

01:23:22 #12 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: LITE-ON DVDRW SOHW-812S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

01:23:22 #13 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

01:23:22 #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SOHW-812S ]
--------------------------------------------------------------

01:23:22 #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [LITE-ON DVDRW SOHW-812S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

01:23:22 #16 Phase 24 File dlgbrnst.cpp, Line 1800
Début de mise en cache des fichiers

01:23:22 #17 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

01:23:22 #18 Phase 25 File dlgbrnst.cpp, Line 1800
Cache des fichiers terminé

01:23:22 #19 Phase 36 File dlgbrnst.cpp, Line 1800
Début de gravure à 4x (5 520 Ko/s)

01:23:22 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

01:23:22 #21 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 01 4D 43 43 00 00 00 - 00 00 30 30 32 00 38 23 ..MCC.....002.8#
54 37 13 02 4A 71 02 90 - 66 16 16 0B 0B 0A 0A 01 T7..Jq..f.......
1C 1E 0B 0C 12 12 01 00 - 00 00 00 00 00 00 00 01 ................

01:23:22 #22 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 14:17,672 (857672ms) -> OK

01:23:22 #23 Text 0 File DVDPlusRW.cpp, Line 564
Start write address at LBA 0
DVD high compatibility mode: Yes

10:35:59 #24 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-812S > start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks

10:36:00 #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:36:19 #26 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

10:36:19 #27 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

10:36:19 #28 Phase 37 File dlgbrnst.cpp, Line 1800
Gravure terminée avec succès à 4x (5 520 Ko/s)

10:36:19 #29 Phase 78 File dlgbrnst.cpp, Line 1800
Vérification de la compilation

10:36:40 #30 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

10:36:40 #31 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Recorder needs eject between burn and verify. Auto reload.
(Medium in drive: Inconnu. Medium required by compilation: DVD.)

10:46:47 #32 Text 0 File UDFCompilationImpl.cpp, Line 1362
Nombre de fichiers=30, identiques=30, différents=0, inaccessibles=0, sautés=0.

10:46:47 #33 Phase 80 File dlgbrnst.cpp, Line 1800
Vérification de la compilation réussie


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0412 built by: WinDDK, size=63744 bytes, created 13/01/2004 12:36:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)




Et le avec le dvd-r impossible de graver ( remarque sur le cd on vois kan meme une bonne parti de brulé )

xxxx-xxxx-xxxx-xxxx-xxxx-xxxx

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
Nero API version: 6.3.0.3
Using interface version: 6.0.0.0
Installed in: D:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-812S> Version: US0N - HA 2 TA 0 - 6.3.0.3
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : HDS722512VLSA80 V33O si3112r Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD200EB-00CSF0 nvatabus Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 nvatabus Port 1 ID 1 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-812S nvatabus Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-812S J: CDRom1
TOSHIBA DVD-ROM SD-M1612 I: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 690MB (706912kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.6.2004
NeroAPI
11:23:53 #1 Phase 111 File APIProgress.cpp, Line 253
DVD-Video files sorted

11:23:53 #2 Text 0 File Reader.cpp, Line 118
Reader running

11:23:53 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-812S running

11:23:53 #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

11:23:53 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

11:23:53 #6 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-At-Once, using DVD media

11:23:53 #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2185823 (485:44.23, 4269MB)

11:23:53 #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

11:23:53 #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: LITE-ON DVDRW SOHW-812S, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193

11:23:53 #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:23:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2185824 (2185824) = #2185824/485:44.24
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2185824 blocks [LITE-ON DVDRW SOHW-812S ]
--------------------------------------------------------------

11:23:54 #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [LITE-ON DVDRW SOHW-812S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4476567552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2185824 | lead-out | 1 | 0x00 | 0x41

11:23:54 #13 Phase 24 File APIProgress.cpp, Line 253
Caching of files started

11:23:54 #14 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

11:23:54 #15 Phase 25 File APIProgress.cpp, Line 253
Caching of files completed

11:23:54 #16 Phase 36 File APIProgress.cpp, Line 253
Burn process started at 4x (5 540 KB/s)

11:23:54 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:23:54 #18 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

11:23:54 #19 Text 0 File Mmc.cpp, Line 19487
Set BUFE: supported -> ON , SMART-BURN : ON

11:23:54 #20 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

11:23:54 #21 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:27:55 #22 SCSI -1046 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x01410000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

11:27:55 #23 CDR -1046 File Writer.cpp, Line 301
Illegal disc

11:27:55 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:27:55 #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

11:27:56 #26 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 31

11:27:56 #27 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 4x (5 540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



Voila sinon ui g des aspi 4.72 mais meme avant ca ne marcher pas mais si faut enlever j'enleve


version de nero 6.3.0.3

cm: asus a7n8x -e deluxe , amd 2600 +, 1 giga de memoire vive, 3 disque dur dont 1 en serial ata, lecteur dvd toshiba et graveur dvd lite on

voila si manque des info dite je transmettrais

Encore une fois merci d'avance

[mike]

Voila sinon ui g des aspi 4.72 mais meme avant ca ne marcher pas mais si faut enlever j'enleve

oui désinstalle le et réinstalle la version 4.6 , la version 4.72 cause des problème sur xp

[Tigrou en wheel tut tut]

Nettoyé avec aspi killer puis 4.60 installé resultat un nouveaux dvd de foutu gravure planté.

[Laddyc]

si tout était nickel avant, remettre les anciens drivers seraient à envisager.
désinstaller le soft de gravure intégré de winxp aussi si ce n'est pas fait.

mettre à jour nero si ce n'es tpas la derniere version.

[Tigrou en wheel tut tut]

Non ca ne marche pas depuis que j'ai acheté ce graveur. Par contre en cd-rom ca fonctionne parfaitement.


Bon j'ai mis a jour la version nero et rien la g pu faire une simulation au moins c un disque de gagné. j'ai en message

Adress bloc invalide

la simulation a échoué

voici toujours le log:

Tigrou

xxxx-xxxx-xxxx-xxxxx-xxxx-xxxx

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Version de Nero : 6.3.1.15
Graveur : <LITE-ON DVDRW SOHW-812S> Version: US0N - HA 1 TA 1 - 6.3.1.15
Pilote d'adaptateur :<nvatabus> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM : <TOSHIBA DVD-ROM SD-M1612>Version: 1004 - HA 1 TA 0 - 6.3.1.15
Pilote d'adaptateur :<nvatabus> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722512VLSA80 V33O si3112r Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD200EB-00CSF0 nvatabus Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 nvatabus Port 1 ID 1 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-812S nvatabus Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1612 I: CDRom0
LITE-ON DVDRW SOHW-812S J: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 630MB (645232kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.6.2004
Compilation UDF/ISO
16:08:51 #1 Phase 112 File dlgbrnst.cpp, Line 1845
Réallocation des fichiers DVD-Vidéo commencée

16:08:51 #2 Phase 114 File dlgbrnst.cpp, Line 1845
Réallocation des fichiers DVD-Vidéo achevée (aucun fichier modifié)

16:08:51 #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

16:08:51 #4 Phase 111 File dlgbrnst.cpp, Line 1845
Classement des fichiers DVD-Vidéo

16:08:51 #5 Text 0 File Reader.cpp, Line 118
Reader running

16:08:51 #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-812S running

16:08:51 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

16:08:51 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

16:08:51 #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disque entier, using DVD media

16:08:52 #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2185823 (485:44.23, 4269MB)

16:08:52 #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

16:08:52 #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: LITE-ON DVDRW SOHW-812S, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193

16:08:52 #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16:08:52 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2185824 (2185824) = #2185824/485:44.24
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2185824 blocks [LITE-ON DVDRW SOHW-812S ]
--------------------------------------------------------------

16:08:52 #15 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [LITE-ON DVDRW SOHW-812S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4476567552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2185824 | lead-out | 1 | 0x00 | 0x41

16:08:52 #16 Phase 24 File dlgbrnst.cpp, Line 1845
Début de mise en cache des fichiers

16:08:52 #17 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

16:08:52 #18 Phase 25 File dlgbrnst.cpp, Line 1845
Cache des fichiers terminé

16:08:52 #19 Phase 32 File dlgbrnst.cpp, Line 1845
Début de simulation à 4x (5 540 Ko/s)

16:08:52 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16:08:52 #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 13:34,068 (814068ms) -> OK

16:08:52 #22 Text 0 File DVDR.cpp, Line 1840
Recording mode: Sequential Recording Mode for Multisession

16:08:52 #23 Text 0 File Mmc.cpp, Line 20239
Set BUFE: supported -> ON , SMART-BURN : OFF

16:08:52 #24 Text 0 File DVDR.cpp, Line 1981
Start write address at LBA 0
DVD high compatibility mode: Yes

16:08:52 #25 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16:08:57 #26 SCSI -1064 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04030000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x00

16:08:57 #27 CDR -1064 File Writer.cpp, Line 304
Adresse de bloc invalide

16:08:57 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

16:08:58 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

16:08:58 #30 Text 0 File DVDR.cpp, Line 2215
EndDAO: Last written address was 31

16:08:58 #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

16:08:58 #32 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

16:09:02 #33 Phase 34 File dlgbrnst.cpp, Line 1845
La simulation a échoué à 4x (5 540 Ko/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0412 built by: WinDDK, size=63744 bytes, created 13/01/2004 12:36:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Ce qui me parait le plus bizarre c'est que dans le log y met dma off et dans nero info tool rien alors qu'en allant sur les gestionnaire de perif c'est bien mi en route

[Sam58]

Salut.

DiskPeripheral : HDS722512VLSA80 V33O si3112r Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD200EB-00CSF0 nvatabus Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 nvatabus Port 1 ID 1 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-812S nvatabus Port 1 ID 1 DMA: Off

Déjà tous les DMA sont sur off

[Tigrou en wheel tut tut]

Salut.


Déjà tous les DMA sont sur off

Je vois bien qui sont sur off pourtant quand tu regarde l'image du début du post dans mon gestionnaire y sont activé. donc je vois pas ce que je peux faire

[Tigrou en wheel tut tut]

Ayé j'ai trouvé.


Le pb venait bien du DMA mais c'etait le driver de l'ide qui merder. Je suis repasser a une version anterieur et hop nikel nero info tool a detecté le dma activé.


Donc voili voilou a savoir pour ceux ki on une asus a7n8x-e deluxe et des pb de gravure, ayé le bon driver qui gere l'ide.

@Pluche


et merci pour votre aide


Tigrou Woo hoo hoo hooooo

[Redoxon]

Nous avions bien vu le blème sur l'image ci dessus. Effectivement c'est un soucis de driver.

Heureux que ton soucis est réglé

[Maverick]

Salut,

Donc voili voilou a savoir pour ceux ki on une asus a7n8x-e deluxe et des pb de gravure, ayé le bon driver qui gere l'ide.

En fait, sur ton image de nero InfoTools, c'est les Autoruns qui sont activés, ce qui n'a rien a voir avec les UDMA.
Quel driver nForce as tu sur ta CM
Les quelques dernières versions sont des intégrés, donc tout s'installe d'office...

[ticosax]

salut,
bien moi j'aimerais en savoir plus sur tes drivers parce que, j'ai la même CM et le même graveur et le même problème. quels sont les pilotes compatibles ?

[Tigrou en wheel tut tut]

salut,
bien moi j'aimerais en savoir plus sur tes drivers parce que, j'ai la même CM et le même graveur et le même problème. quels sont les pilotes compatibles ?

donc moi les drivers qui tourne actuellement chez moi 'est ceux la :

http://www.nvidia.com/object/nforce_udp_winxp_3.13

et j'avais mis a jour sur la version 4.24 plus recente mais a partir de la ca ne marcher plus:

http://www.nvidia.com/object/nforce_udp_winxp_4.24


Donc je suis revenu a l'ancienne version et voila plus de soucis

[ticosax]

merci déjà, mais ce n'est pas aussi rose pour moi, car infotool de nero fait tout planter. je voudrais savoir si lors de l'installation des 3.13 tu as activé l'option de prise en charge des controleurs par le pilote "expérimental" de nvidia ou tu as laissé ceux que windows utilisent habituellement ?