Problème Gravure Lite-On DVDRW SHM-165H6S

Forum de support des graveurs et périphériques Lite-On.

Problème Gravure Lite-On DVDRW SHM-165H6S

Messagepar gellek » 24 Nov 2007 20:56

Bonjour,
Je possède le graveur Lite-On DVDRW SHM-165H6S et depuis hier impossible de graver, à chaque fois Nero me marque :




1C82-0000-19E5-MAAX-4003-9801-****

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=5, 0, 0, 1, size=22528 bytes, created 17/03/2001 20:34:12
ahead WinASPI: File 'C:\Program Files\Nero\Nero Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.5.1.1
Internal Version: 7, 5, 1, 1

Recorder: <LITE-ON DVDRW SHM-165H6S>Version: HS0E - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SHM-165H6S>Version: HS0E - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3200827AS iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHM-165H6S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SHM-165H6S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046924kB)
Free physical memory: 541MB (554596kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.11.2007
Compilation ISO
18:17:46 #1 Text 0 File Isodoc.cpp, Line 6510
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:17:46 #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

18:17:46 #3 Text 0 File Reader.cpp, Line 126
Reader running

18:17:46 #4 Text 0 File Writer.cpp, Line 123
Writer E: LITE-ON DVDRW SHM-165H6S running

18:17:46 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)

18:17:46 #6 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using DVD media

18:17:47 #7 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1437327 (319:24.27, 2807MB)

18:17:47 #8 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)

18:17:47 #9 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: LITE-ON DVDRW SHM-165H6S, Media type: DVD-R
Disc Manufacturer: DAXON0 - 08S
Disc Application Code: 64, Disc Physical Code: 193

18:17:47 #10 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:17:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1437328 (1437328) = #1437328/319:24.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1437328 blocks [E: LITE-ON DVDRW SHM-165H6S]
--------------------------------------------------------------

18:17:47 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [E: LITE-ON DVDRW SHM-165H6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2943647744, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1437328 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1437328 | 0 | 0x00
1437328 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

18:17:47 #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:17:47 #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

18:17:47 #15 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.

18:17:47 #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

18:17:47 #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5 540 Ko/s)

18:17:47 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:17:47 #19 Text 0 File DVDR.cpp, Line 2969
Recording mode: Sequential Recording Mode

18:17:47 #20 Text 0 File DVDR.cpp, Line 3125
Start write address at LBA 0
DVD high compatibility mode: Yes

18:17:47 #21 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:18:26 #22 Text 0 File Cdrdrv.cpp, Line 1290
18:18:26.281 - E: LITE-ON DVDRW SHM-165H6S : Queue again later

18:22:10 #23 SPTI -1046 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 15 60 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x075e0000: Len x10000
0xE3 16 ED 8A 37 D4 F4 D7 10 85 B1 A7 3C 24 0A A9
0xE1 F7 60 67 33 CC F7 0E 8E EC FB DC DA E2 B8 EA
0xAD 3D CF BB BD 3E ED BE 3D 5E 14 C9 CE E2 E2 AC

18:22:10 #24 CDR -1046 File Writer.cpp, Line 312
Illegal disc
E: LITE-ON DVDRW SHM-165H6S

18:22:10 #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:22:10 #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

18:22:11 #27 Text 0 File DVDR.cpp, Line 3341
EndDAO: Last written address was 5471

18:22:11 #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5 540 Ko/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/08/2005 02:00:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 08:05:10
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 08/03/2007 00:51:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



Donc si quelqu'un pouvait m'aider, ca serait sympa. J'ai des choses importantes à graver. Merci d'avance.


Nero : 7.5.1.1
DVD : DVD-R Phillips
Vitesse de Gravure avant le problème : 8x
Graveur : Lite-On DVDRW SHM-165H6S
Autres :

- XP Media Center SP2
- ASPI 4.60 installé suite à votre tuto, avant 4.1.72
- Aide gravure XP désactivé
- Mode DMA activé
- Autorun désactivé



Quand je veux graver, ca grave jusqu'à 3-4% puis ca bloque quand la vitesse d'ecriture atteint 6.5x , le DVD continuer de tourner puis 2-3 minutes après ca me marque " Disque Non Valable " puis je vous ai posté le log.

Je grave depuis pas mal de temps avec ce graveur donc je ne pense pas qu'il y ait un rapport avec la compatibilité du CD car j'ai toujours utilisé les phillips.


Merci d'avance pour vos reponses.
gellek
Nouveau Membre
 
Messages: 3
Enregistré le: 24 Nov 2007

Messagepar gellek » 24 Nov 2007 21:31

Je viens d'essater un CD-R Verbatim , ca a marché donc je vais essayer un DVDR W Verbatim.
gellek
Nouveau Membre
 
Messages: 3
Enregistré le: 24 Nov 2007

Messagepar Scaramanga » 24 Nov 2007 21:34

Salut et bienvenue sur le forum de Gravure-News,

Code: Tout sélectionner
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


-Le disque inséré n'est pas reconnu. Qulle est la marque de ces médias ?
-Met a jour ton firmware.

http://www.liteonit.com/global/index.ph ... &Itemid=75
:wink:
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14171
Enregistré le: 05 Sep 2002

Messagepar gellek » 25 Nov 2007 1:32

J'ai mis à jour le firmware et le disque inséré est un DVD-R Phillips. Je réesaye demain, je vous tiens au courant.
gellek
Nouveau Membre
 
Messages: 3
Enregistré le: 24 Nov 2007



  • Publicité

Retourner vers Graveurs Lite-On

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités

cron