recherche incomplete: gravure échoué

Messages d'erreur dans vos logiciels ? Besoin d'explications ou de solutions ? C'est ici qu'il vous faut poster.

recherche incomplete: gravure échoué

Messagepar adn » 06 Mar 2007 1:00

Bonjour,
Voila mon problème, nero m'affiche ce message apres m'avoir planté mon dvd-r:
recherche incomplete: gravure échoué

ma config:
j'ai utilisé des TDK DVD-R 4,7Gb 16X certified (blue), gravé en 4X avec Nero 7.0.1.2 sur un NEC ND 4550A firmware v1.8 (à jour) windows xp pro sp2...
en utilisant d'autres logiciels, soit le dvd n'est pas reconnu, soit la gravure echoue...

Voici mon log (un peu long :oops: ) est ce que quelqu'un pourrait le decrypter svp?


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <_NEC DVD_RW ND-4550A> Version: 1.08 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-4550A >Version: 1.08 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-4550A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : BJ3503Z XHO017F 1.0 dtscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-4550A E: CDRom0
BJ3503Z XHO017F G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785888kB)
Free physical memory: 338MB (346276kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.2.2007
Compilation ISO
20:50:43 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:50:43 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

20:50:43 #3 Text 0 File Reader.cpp, Line 124
Reader running

20:50:43 #4 Text 0 File Writer.cpp, Line 113
Writer E: _NEC DVD_RW ND-4550A running

20:50:43 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

20:50:43 #6 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

20:50:43 #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2146303 (476:57.28, 4191MB)

20:50:43 #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD DVD)

20:50:43 #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-4550A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

20:50:43 #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:50:43 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2146304 (2146304) = #2146304/476:57.29
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2146304 blocks [E: _NEC DVD_RW ND-4550A]
--------------------------------------------------------------

20:50:43 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: _NEC DVD_RW ND-4550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4395630592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2146304 | lead-out | 1 | 0x41 | 0x00

20:50:43 #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

20:50:43 #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

20:50:44 #15 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

20:50:44 #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

20:50:44 #17 Phase 28 File dlgbrnst.cpp, Line 1725
Speed measurement started

20:50:44 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:52:34 #19 Text 0 File WriterStatus.cpp, Line 116
<E: _NEC DVD_RW ND-4550A> start writing Lead-Out at LBA 2146304 (20C000h), length 0 blocks

20:52:34 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:52:34 #21 Phase 29 File dlgbrnst.cpp, Line 1674
Speed measurement completed: 28,6x (39 578 Ko/s)

20:52:34 #22 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 4x (5 540 Ko/s)

20:52:34 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:52:34 #24 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

20:52:34 #25 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

20:52:34 #26 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

20:52:34 #27 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 0.9x (0)
Disc Size: 120 mm, Maximum Rate: 2,52 Mbps (0 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: ?
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 0 h (?)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:52:36 #28 Text 0 File Cdrdrv.cpp, Line 1197
20:52:36.229 - E: _NEC DVD_RW ND-4550A : Queue again later

21:05:58 #29 Text 0 File WriterStatus.cpp, Line 116
<E: _NEC DVD_RW ND-4550A> start writing Lead-Out at LBA 2146304 (20C000h), length 0 blocks

21:05:58 #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:05:58 #31 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2146303

21:06:26 #32 Phase 33 File dlgbrnst.cpp, Line 1725
Simulation completed successfully at 4x (5 540 Ko/s)

21:06:27 #33 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5 540 Ko/s)

21:06:27 #34 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:06:27 #35 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

21:06:27 #36 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

21:06:27 #37 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

21:06:27 #38 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 0.9x (0)
Disc Size: 120 mm, Maximum Rate: 2,52 Mbps (0 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: ?
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 0 h (?)
End Physical Sector Number of Data Area: 23BFFF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:06:28 #39 Text 0 File Cdrdrv.cpp, Line 1197
21:06:28.786 - E: _NEC DVD_RW ND-4550A : Queue again later

21:07:44 #40 SPTI -1093 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 0B 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 02
Buffer x03590000: Len x10000
0x34 1B E5 C3 FF 83 7C 18 BB E0 C5 C0 79 45 54 3D
0xA3 E1 DF B2 8F 68 28 95 FF 14 63 38 F0 65 45 E0
0xD4 4B 80 74 1A 04 05 61 0E 4F F3 EA D4 17 7A E3

21:07:44 #41 CDR -1093 File Writer.cpp, Line 302
No seek complete
E: _NEC DVD_RW ND-4550A

21:07:44 #42 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:07:44 #43 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

21:07:45 #44 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2943

21:07:45 #45 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5 540 Ko/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 23/05/2006 16:25:07
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)




je rajoute que la simulation est passé avec succès.
Alors pourquoi la gravure échoue?
Avatar de l’utilisateur
adn
Nouveau Membre
 
Messages: 2
Enregistré le: 06 Mar 2007

Messagepar Scaramanga » 06 Mar 2007 5:22

Salut et bienvenue sur le forum de Gravure-News,

Le média ne semble pas reconnu par le graveur.

Code: Tout sélectionner
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


Ou as tu trouvé ce firmware 1.8 ?
http://www.de.nec.de/softwareoverview2.php/id/1333
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14146
Enregistré le: 05 Sep 2002

Messagepar Alana » 06 Mar 2007 9:45

Je rencontre aussi des problèmes avec les DVD TDK, en effet j'utilise des +RW et malgré qu'ils soient effacés ( en mode complet ) je n'arrive pas à les réenregistrer. Je vais donc changer de marque.
Avatar de l’utilisateur
Alana
Membre remarqué
Membre remarqué
 
Messages: 38
Enregistré le: 31 Déc 2006
Localisation: Belgique, Province du Luxembourg

Messagepar adn » 06 Mar 2007 17:09

bonjour, merci de me répondre (ce n'est pas le cas sur tout les forum)

j'ai trouvé cette maj ici:
http://www.clubic.com/telecharger-pilot ... 4550a.html

sur un vieux post j'ai vu que cette personne avait la meme config que moi (à part nero (7.0.1.4 et moi 7.0.1.2) et il a pas l'air de se plaindre d'une incompatibilité...
http://forum.gravure-news.com/tdk-dvd-r ... t22584.htm


J'ai aussi cherché du coté hardware (l'alim) les +5v sont a 4.869. pour pc probe il me dit ok mais mon bios me le rappelle de temps en temps au redemarage. (sinon je n'est pas reboot intempestifs).

sinon j'ai aussi des verbatim (-R et +RW) qui eux se gravent sans problème...
l'incompatibilité à l'air d'être l'explication la plus logique :roll:
Avatar de l’utilisateur
adn
Nouveau Membre
 
Messages: 2
Enregistré le: 06 Mar 2007



  • Publicité

Retourner vers Logiciels de gravure

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités

cron