Posté le: 12 Mar 2008 17:57 Sujet du message: Problème de gravure : mauvais réglages ?
Bonjour à tous
j'essaye de faire un liveCD de linux à partir d'un fichier .iso téléchargé, mais à chaque essai la gravure s'arrête vers 15% en mettant qu'il y a eu une erreur de gravure. N'ayant pas des connaissances avancées, je viens demander votre aide ; j'ai fait quelques recherches mais je n'ai pas trouvé ce que je voulais.
Pour information, je grave avec nero, et mon lecteur/graveur est un Philips DVD+-RW SDVD8431.
N'est-il pas possible aussi d'utiliser ce fichier .iso avec daemon tools pour lancer linux ? (je ne pense pas puisqu'il faut redémarrer l'ordinateur pour lancer linux, mais je demande quand même)
Merci d'avance à tous pour l'aide que vous pourrez m'apporter.
Le fichier fait 621Mo, et j'essaye de graver sur un CD-RW (700MB), et non un DVD
Stef Tutoriel GN-Killer
Inscrit le: 21 Sep 2002 Messages: 5354
Posté le: 12 Mar 2008 19:23 Sujet du message:
L'état du graveur est en echec d'après ta capture...
Tu peux nous mettre le log de gravure de Nero stp ?
Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.
En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:\Program file\AheadNero, il se nomne NeroHistoryLog . On peut le visualier avec un éditeur de texte , bloc note de windows par exemple.
Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log.
tu peux le coller entre les balise [ code ] et [ /code ].
[code:1:98856a2f57]
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <acw6pn6d> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 3 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 87MB (89820kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.3.2008
Image CD
09:17:23 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés
09:17:23 #2 Text 0 File Reader.cpp, Line 127
Reader running
09:17:23 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running
09:17:23 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
09:17:24 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)
09:17:24 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
09:17:24 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
09:17:24 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:17:24 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
09:17:24 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
09:17:24 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
09:17:24 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3 600 Ko/s)
09:17:24 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
09:17:24 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off
09:17:24 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON
09:19:25 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04F00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x80 0x7A 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
09:19:25 #19 CDR -1135 File Writer.cpp, Line 311
Write error
09:19:25 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:19:25 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
09:19:25 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3 600 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <acw6pn6d> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 3 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 70MB (72312kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.3.2008
Image CD
09:21:33 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés
09:21:33 #2 Text 0 File Reader.cpp, Line 127
Reader running
09:21:33 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running
09:21:33 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
09:21:33 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)
09:21:33 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
09:21:33 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)
09:21:33 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:21:33 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
09:21:33 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
09:21:33 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
09:21:33 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)
09:21:33 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
09:21:33 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off
09:21:33 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON
09:22:56 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x033F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7B 0x32 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
09:22:56 #19 CDR -1135 File Writer.cpp, Line 311
Write error
09:22:56 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:22:56 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
09:22:56 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <acw6pn6d> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 3 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 81MB (83524kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.3.2008
Image CD
09:23:54 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés
09:23:54 #2 Text 0 File Reader.cpp, Line 127
Reader running
09:23:54 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running
09:23:54 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
09:23:54 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 318319 ( 70:46.19)
09:23:54 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
09:23:54 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 34 22; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: E1 00 C6, 2: 61 22 16 (LI 97:34.22), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 3A B0, 2: 5C C6 26, 3: 00 00 00 (invalid)
09:23:54 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:23:55 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
09:23:55 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
09:23:55 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
09:23:55 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 Ko/s)
09:23:55 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
09:23:55 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off
09:23:55 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON
09:26:36 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03400000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x78 0xF6 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
09:26:36 #19 CDR -1135 File Writer.cpp, Line 311
Write error
09:26:36 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:26:36 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
09:26:36 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <acw6pn6d> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 3 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 77MB (79016kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.3.2008
Image CD
09:28:19 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés
09:28:19 #2 Text 0 File Reader.cpp, Line 127
Reader running
09:28:19 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running
09:28:19 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
09:28:19 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 318319 ( 70:46.19)
09:28:19 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
09:28:19 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 10 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: A3 00 CE, 2: 61 0A 00 (LI 97:10.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 48, 3: 00 00 00 (invalid)
09:28:19 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:28:19 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
09:28:19 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
09:28:19 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
09:28:19 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)
09:28:20 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
09:28:20 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off
09:28:20 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON
09:29:46 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x033D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7B 0xE8 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
09:29:46 #19 CDR -1135 File Writer.cpp, Line 311
Write error
09:29:47 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:29:47 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
09:29:47 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <acw6pn6d> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 3 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 130MB (133676kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.3.2008
CD-ROM (ISO)
09:31:04 #1 Text 0 File Isodoc.cpp, Line 6179
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
09:31:04 #2 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés
09:31:04 #3 Text 0 File Reader.cpp, Line 127
Reader running
09:31:04 #4 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running
09:31:04 #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
09:31:04 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Track-At-Once, using CD-R/RW media
09:31:05 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 76533 ( 17:02.33)
09:31:05 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
09:31:05 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 10 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: A3 00 CE, 2: 61 0A 00 (LI 97:10.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 48, 3: 00 00 00 (invalid)
09:31:05 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:31:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 76534 (76534) = #76534/17:0.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 76532 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------
09:31:05 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 157048832, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
76534 | lead-out | 1 | 0x41 | 0x00
09:31:05 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 76534 -> 76532.
09:31:05 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
09:31:05 #15 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
09:31:05 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
09:31:05 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)
09:31:05 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
09:31:05 #19 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON
09:32:05 #20 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x098B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x79 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
09:32:05 #21 CDR -1135 File Writer.cpp, Line 311
Write error
09:32:06 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:32:06 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
09:32:06 #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
PHILIPS DVD+-RW SDVD8431\H1 T0
09:32:06 #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
09:32:06 #26 Text 0 File Mmc.cpp, Line 16001
<PHILIPS DVD+-RW SDVD8431> start Close Session
09:32:51 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <asvz83hq> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 3 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 64MB (65956kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.3.2008
Image CD
12:54:59 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés
12:54:59 #2 Text 0 File Reader.cpp, Line 127
Reader running
12:54:59 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running
12:54:59 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
12:54:59 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)
12:54:59 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
12:54:59 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)
12:54:59 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:55:00 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:55:00 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
12:55:00 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:55:00 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)
12:55:00 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
12:55:00 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off
12:55:00 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON
12:56:27 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09BB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7B 0x9A 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
12:56:27 #19 CDR -1135 File Writer.cpp, Line 311
Write error
12:56:27 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:56:27 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:56:28 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <asvz83hq> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 3 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 79MB (81024kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.3.2008
Image CD
13:08:46 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés
13:08:46 #2 Text 0 File Reader.cpp, Line 127
Reader running
13:08:46 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running
13:08:46 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
13:08:46 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)
13:08:46 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
13:08:46 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)
13:08:46 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:08:47 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
13:08:47 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
13:08:47 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
13:08:47 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 Ko/s)
13:08:47 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
13:08:47 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off
13:08:47 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON
13:10:09 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03370000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x78 0x5A 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
13:10:09 #19 CDR -1135 File Writer.cpp, Line 311
Write error
13:10:09 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:10:09 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
13:10:09 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <asvz83hq> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 3 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 95MB (97692kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.3.2008
CD-ROM (ISO)
13:23:53 #1 Text 0 File Isodoc.cpp, Line 6179
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:23:53 #2 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés
13:23:53 #3 Text 0 File Reader.cpp, Line 127
Reader running
13:23:53 #4 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running
13:23:53 #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
13:23:53 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Track-At-Once, using CD-R/RW media
13:23:53 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318320 ( 70:46.20)
13:23:53 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
13:23:53 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)
13:23:53 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:23:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 318321 (318321) = #318321/70:44.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318319 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------
13:23:53 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 652228608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318321 | lead-out | 1 | 0x41 | 0x00
13:23:53 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 318321 -> 318319.
13:23:55 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
13:23:55 #15 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
13:23:55 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
13:23:55 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)
13:23:55 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:23:55 #19 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON
13:25:04 #20 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x098F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7A 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
13:25:04 #21 CDR -1135 File Writer.cpp, Line 311
Write error
13:25:04 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:25:04 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
13:25:04 #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
PHILIPS DVD+-RW SDVD8431\H1 T0
13:25:04 #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
13:25:04 #26 Text 0 File Mmc.cpp, Line 16001
<PHILIPS DVD+-RW SDVD8431> start Close Session
13:25:45 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <aimlhme3> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 3 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 85MB (87540kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.3.2008
Image CD
14:22:24 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés
14:22:24 #2 Text 0 File Reader.cpp, Line 127
Reader running
14:22:24 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running
14:22:24 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
14:22:24 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)
14:22:24 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
14:22:24 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)
14:22:24 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:22:24 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
14:22:24 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
14:22:24 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
14:22:24 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)
14:22:24 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
14:22:24 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off
14:22:24 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON
14:23:51 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04F20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7B 0x9A 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
14:23:51 #19 CDR -1135 File Writer.cpp, Line 311
Write error
14:23:51 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
14:23:51 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
14:23:51 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <aimlhme3> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 3 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 45MB (46128kB)
Memory in use : 91 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.3.2008
Image CD
18:31:24 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés
18:31:24 #2 Text 0 File Reader.cpp, Line 127
Reader running
18:31:24 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running
18:31:25 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
18:31:25 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)
18:31:25 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
18:31:25 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code
Stef Tutoriel GN-Killer
Inscrit le: 21 Sep 2002 Messages: 5354
Posté le: 12 Mar 2008 20:14 Sujet du message:
Ton graveur grave-t-il normalement les CDR classique ? A-t-il déja gravé normalement sur ton CDR-W ?
J'ai l'impression qu'il ne le reconnait pas !
D'autre part, tu as une palanquée de lecteurs virtuels ! Ils peuvent occasionner parfois des erreurs de gravure.
Conseil dans un premier temps :
1/ essaye un autre CDR W ou un CDR classique
2/ désactive tout ces lecteurs virtuels
Si tu as changé de media (type et marque) comme le suggère Stef, télécharge à nouveau ton image ISO.
Stef Tutoriel GN-Killer
Inscrit le: 21 Sep 2002 Messages: 5354
Posté le: 12 Mar 2008 22:08 Sujet du message:
Oui c'est ce que j'allais suggerer, il se peut que ton image soit corrompue !
Essaye de la retélégarger ou sinon essaye de créer une image iso à partir d'un cd en ta possession et essaye de la graver sur ton CDR-W.
Comme ca on sera fixé.
FAQ
Règlements
Rechercher
Téléchargement
S'enregistrer
Profil
Se connecter pour vérifier ses messages privés
Connexion
Carte des membres
; j'ai fait quelques recherches mais je n'ai pas trouvé ce que je voulais.
