Gravure-News

par **tahlmo** » 12 Mar 2008 18:57

Bonjour à tous

j'essaye de faire un liveCD de linux à partir d'un fichier .iso téléchargé, mais à chaque essai la gravure s'arrête vers 15% en mettant qu'il y a eu une erreur de gravure. N'ayant pas des connaissances avancées, je viens demander votre aide :praise:

; j'ai fait quelques recherches mais je n'ai pas trouvé ce que je voulais.
Pour information, je grave avec nero, et mon lecteur/graveur est un Philips DVD+-RW SDVD8431.

N'est-il pas possible aussi d'utiliser ce fichier .iso avec daemon tools pour lancer linux ? (je ne pense pas puisqu'il faut redémarrer l'ordinateur pour lancer linux, mais je demande quand même)

Merci d'avance à tous pour l'aide que vous pourrez m'apporter.

par **Stef** » 12 Mar 2008 18:59

Bonjour et bienvenue sur GN :wink:

Quel est le méssage d'erreur exact ?

par **tahlmo** » 12 Mar 2008 19:39

J'ai exactement ça :

par **Stef** » 12 Mar 2008 19:42

Quelle est la taille de ton fichier ISO ?
En principe les Live CD Linux sont sur CD me semble-t-il !
La tu essayes de graver sur un DVD....

par **tahlmo** » 12 Mar 2008 19:57

Le fichier fait 621Mo, et j'essaye de graver sur un CD-RW (700MB), et non un DVD

par **Stef** » 12 Mar 2008 20:23

L'état du graveur est en echec d'après ta capture...
Tu peux nous mettre le log de gravure de Nero stp ?

Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.

En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:\Program file\AheadNero, il se nomne NeroHistoryLog . On peut le visualier avec un éditeur de texte , bloc note de windows par exemple.

Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log.
tu peux le coller entre les balise [ code ] et [ /code ].

par **tahlmo** » 12 Mar 2008 21:05

[code]
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <acw6pn6d> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8431 D: CDRom0
VY1082Z TWK982D E: CDRom1
VY1082Z TWK982D F: CDRom2
VY1082Z TWK982D G: CDRom3
VY1082Z TWK982D H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 87MB (89820kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.3.2008
Image CD
09:17:23 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés

09:17:23 #2 Text 0 File Reader.cpp, Line 127
Reader running

09:17:23 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running

09:17:23 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media

09:17:24 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)

09:17:24 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

09:17:24 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

09:17:24 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:17:24 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 318320 (318320) = #318320/70:44.20
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 318320 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------

09:17:24 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 779614560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318320 | lead-out | 1 | 0x41 | 0x00

09:17:24 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

09:17:24 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

09:17:24 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

09:17:24 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3 600 Ko/s)

09:17:24 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

09:17:24 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off

09:17:24 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON

09:19:25 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04F00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x80 0x7A 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

09:19:25 #19 CDR -1135 File Writer.cpp, Line 311
Write error

09:19:25 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

09:19:25 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

09:19:25 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3 600 Ko/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <acw6pn6d> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8431 D: CDRom0
VY1082Z TWK982D E: CDRom1
VY1082Z TWK982D F: CDRom2
VY1082Z TWK982D G: CDRom3
VY1082Z TWK982D H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 70MB (72312kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.3.2008
Image CD
09:21:33 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés

09:21:33 #2 Text 0 File Reader.cpp, Line 127
Reader running

09:21:33 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running

09:21:33 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media

09:21:33 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)

09:21:33 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

09:21:33 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)

09:21:33 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:21:33 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 318320 (318320) = #318320/70:44.20
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 318320 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------

09:21:33 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 779614560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318320 | lead-out | 1 | 0x41 | 0x00

09:21:33 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

09:21:33 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

09:21:33 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

09:21:33 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)

09:21:33 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

09:21:33 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off

09:21:33 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON

09:22:56 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x033F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7B 0x32 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

09:22:56 #19 CDR -1135 File Writer.cpp, Line 311
Write error

09:22:56 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

09:22:56 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

09:22:56 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <acw6pn6d> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8431 D: CDRom0
VY1082Z TWK982D E: CDRom1
VY1082Z TWK982D F: CDRom2
VY1082Z TWK982D G: CDRom3
VY1082Z TWK982D H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 81MB (83524kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.3.2008
Image CD
09:23:54 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés

09:23:54 #2 Text 0 File Reader.cpp, Line 127
Reader running

09:23:54 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running

09:23:54 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media

09:23:54 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 318319 ( 70:46.19)

09:23:54 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

09:23:54 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 34 22; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: E1 00 C6, 2: 61 22 16 (LI 97:34.22), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 3A B0, 2: 5C C6 26, 3: 00 00 00 (invalid)

09:23:54 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:23:54 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 318320 (318320) = #318320/70:44.20
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 318320 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------

09:23:55 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 779614560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318320 | lead-out | 1 | 0x41 | 0x00

09:23:55 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

09:23:55 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

09:23:55 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

09:23:55 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 Ko/s)

09:23:55 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

09:23:55 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off

09:23:55 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON

09:26:36 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03400000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x78 0xF6 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

09:26:36 #19 CDR -1135 File Writer.cpp, Line 311
Write error

09:26:36 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

09:26:36 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

09:26:36 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 Ko/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <acw6pn6d> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8431 D: CDRom0
VY1082Z TWK982D E: CDRom1
VY1082Z TWK982D F: CDRom2
VY1082Z TWK982D G: CDRom3
VY1082Z TWK982D H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 77MB (79016kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.3.2008
Image CD
09:28:19 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés

09:28:19 #2 Text 0 File Reader.cpp, Line 127
Reader running

09:28:19 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running

09:28:19 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media

09:28:19 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 318319 ( 70:46.19)

09:28:19 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

09:28:19 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 10 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: A3 00 CE, 2: 61 0A 00 (LI 97:10.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 48, 3: 00 00 00 (invalid)

09:28:19 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:28:19 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 318320 (318320) = #318320/70:44.20
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 318320 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------

09:28:19 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 779614560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318320 | lead-out | 1 | 0x41 | 0x00

09:28:19 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

09:28:19 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

09:28:19 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

09:28:19 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)

09:28:20 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

09:28:20 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off

09:28:20 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON

09:29:46 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x033D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7B 0xE8 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

09:29:46 #19 CDR -1135 File Writer.cpp, Line 311
Write error

09:29:47 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

09:29:47 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

09:29:47 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <acw6pn6d> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 acw6pn6d Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8431 D: CDRom0
VY1082Z TWK982D E: CDRom1
VY1082Z TWK982D F: CDRom2
VY1082Z TWK982D G: CDRom3
VY1082Z TWK982D H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 130MB (133676kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.3.2008
CD-ROM (ISO)
09:31:04 #1 Text 0 File Isodoc.cpp, Line 6179
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

09:31:04 #2 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés

09:31:04 #3 Text 0 File Reader.cpp, Line 127
Reader running

09:31:04 #4 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running

09:31:04 #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

09:31:04 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Track-At-Once, using CD-R/RW media

09:31:05 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 76533 ( 17:02.33)

09:31:05 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

09:31:05 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 10 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: A3 00 CE, 2: 61 0A 00 (LI 97:10.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 48, 3: 00 00 00 (invalid)

09:31:05 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:31:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 76534 (76534) = #76534/17:0.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 76532 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------

09:31:05 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 157048832, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
76534 | lead-out | 1 | 0x41 | 0x00

09:31:05 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 76534 -> 76532.

09:31:05 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

09:31:05 #15 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

09:31:05 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

09:31:05 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)

09:31:05 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

09:31:05 #19 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON

09:32:05 #20 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x098B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x79 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

09:32:05 #21 CDR -1135 File Writer.cpp, Line 311
Write error

09:32:06 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

09:32:06 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

09:32:06 #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
PHILIPS DVD+-RW SDVD8431\H1 T0

09:32:06 #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

09:32:06 #26 Text 0 File Mmc.cpp, Line 16001
<PHILIPS DVD+-RW SDVD8431> start Close Session

09:32:51 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <asvz83hq> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8431 D: CDRom0
VY1082Z TWK982D E: CDRom1
VY1082Z TWK982D F: CDRom2
VY1082Z TWK982D G: CDRom3
VY1082Z TWK982D H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 64MB (65956kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.3.2008
Image CD
12:54:59 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés

12:54:59 #2 Text 0 File Reader.cpp, Line 127
Reader running

12:54:59 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running

12:54:59 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media

12:54:59 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)

12:54:59 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

12:54:59 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)

12:54:59 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:54:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 318320 (318320) = #318320/70:44.20
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 318320 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------

12:54:59 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 779614560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318320 | lead-out | 1 | 0x41 | 0x00

12:55:00 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:55:00 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

12:55:00 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:55:00 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)

12:55:00 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

12:55:00 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off

12:55:00 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON

12:56:27 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09BB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7B 0x9A 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

12:56:27 #19 CDR -1135 File Writer.cpp, Line 311
Write error

12:56:27 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:56:27 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:56:28 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <asvz83hq> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8431 D: CDRom0
VY1082Z TWK982D E: CDRom1
VY1082Z TWK982D F: CDRom2
VY1082Z TWK982D G: CDRom3
VY1082Z TWK982D H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 79MB (81024kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.3.2008
Image CD
13:08:46 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés

13:08:46 #2 Text 0 File Reader.cpp, Line 127
Reader running

13:08:46 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running

13:08:46 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media

13:08:46 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)

13:08:46 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

13:08:46 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)

13:08:46 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:08:46 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 318320 (318320) = #318320/70:44.20
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 318320 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------

13:08:46 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 779614560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318320 | lead-out | 1 | 0x41 | 0x00

13:08:47 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

13:08:47 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

13:08:47 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

13:08:47 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 Ko/s)

13:08:47 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

13:08:47 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off

13:08:47 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON

13:10:09 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03370000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x78 0x5A 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

13:10:09 #19 CDR -1135 File Writer.cpp, Line 311
Write error

13:10:09 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:10:09 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

13:10:09 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 Ko/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <asvz83hq> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 asvz83hq Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8431 D: CDRom0
VY1082Z TWK982D E: CDRom1
VY1082Z TWK982D F: CDRom2
VY1082Z TWK982D G: CDRom3
VY1082Z TWK982D H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 95MB (97692kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.3.2008
CD-ROM (ISO)
13:23:53 #1 Text 0 File Isodoc.cpp, Line 6179
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13:23:53 #2 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés

13:23:53 #3 Text 0 File Reader.cpp, Line 127
Reader running

13:23:53 #4 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running

13:23:53 #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

13:23:53 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Track-At-Once, using CD-R/RW media

13:23:53 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318320 ( 70:46.20)

13:23:53 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

13:23:53 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)

13:23:53 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:23:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 318321 (318321) = #318321/70:44.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318319 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------

13:23:53 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 652228608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318321 | lead-out | 1 | 0x41 | 0x00

13:23:53 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 318321 -> 318319.

13:23:55 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

13:23:55 #15 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

13:23:55 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

13:23:55 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)

13:23:55 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:23:55 #19 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON

13:25:04 #20 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x098F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7A 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

13:25:04 #21 CDR -1135 File Writer.cpp, Line 311
Write error

13:25:04 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:25:04 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

13:25:04 #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
PHILIPS DVD+-RW SDVD8431\H1 T0

13:25:04 #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

13:25:04 #26 Text 0 File Mmc.cpp, Line 16001
<PHILIPS DVD+-RW SDVD8431> start Close Session

13:25:45 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <aimlhme3> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8431 D: CDRom0
VY1082Z TWK982D E: CDRom1
VY1082Z TWK982D F: CDRom2
VY1082Z TWK982D G: CDRom3
VY1082Z TWK982D H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 85MB (87540kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.3.2008
Image CD
14:22:24 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés

14:22:24 #2 Text 0 File Reader.cpp, Line 127
Reader running

14:22:24 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running

14:22:24 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media

14:22:24 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)

14:22:24 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

14:22:24 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)

14:22:24 #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:22:24 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 318320 (318320) = #318320/70:44.20
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 318320 blocks [PHILIPS DVD+-RW SDVD8431]
--------------------------------------------------------------

14:22:24 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVD+-RW SDVD8431] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 779614560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318320 | lead-out | 1 | 0x41 | 0x00

14:22:24 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

14:22:24 #12 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

14:22:24 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

14:22:24 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1 500 Ko/s)

14:22:24 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

14:22:24 #16 Text 0 File Mmc.cpp, Line 16573
StartDAO : CD-Text - Off

14:22:24 #17 Text 0 File Mmc.cpp, Line 21353
Set BUFE: Buffer underrun protection -> ON

14:23:51 #18 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04F20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7B 0x9A 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

14:23:51 #19 CDR -1135 File Writer.cpp, Line 311
Write error

14:23:51 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14:23:51 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

14:23:51 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1 500 Ko/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PHILIPS DVD+-RW SDVD8431>Version: LX51 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VY1082Z TWK982D >Version: 1.0 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <aimlhme3> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8431 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 0 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 1 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 2 DMA: Off
CdRomPeripheral : VY1082Z TWK982D 1.0 aimlhme3 Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8431 D: CDRom0
VY1082Z TWK982D E: CDRom1
VY1082Z TWK982D F: CDRom2
VY1082Z TWK982D G: CDRom3
VY1082Z TWK982D H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 45MB (46128kB)
Memory in use : 91 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.3.2008
Image CD
18:31:24 #1 Text 0 File Burncd.cpp, Line 2868
PHILIPS DVD+-RW SDVD8431
Protection contre les ruptures activés

18:31:24 #2 Text 0 File Reader.cpp, Line 127
Reader running

18:31:24 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW SDVD8431 running

18:31:25 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media

18:31:25 #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 318319 ( 70:46.19)

18:31:25 #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

18:31:25 #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVD+-RW SDVD8431;
CDRW code

par **Stef** » 12 Mar 2008 21:14

Ton graveur grave-t-il normalement les CDR classique ? A-t-il déja gravé normalement sur ton CDR-W ?
J'ai l'impression qu'il ne le reconnait pas !
D'autre part, tu as une palanquée de lecteurs virtuels ! Ils peuvent occasionner parfois des erreurs de gravure.

Conseil dans un premier temps :
1/ essaye un autre CDR W ou un CDR classique
2/ désactive tout ces lecteurs virtuels

par **tahlmo** » 12 Mar 2008 22:13

Je ne grave que très peu, il y a longtemps que je ne l'ai plus utilisé.

Merci pour ton aide Stef ; j'ai changé de CD et j'ai désactivé tous les lecteurs virtuels, mais ça n'a rien changé

par **Burnitall** » 12 Mar 2008 23:06

Si tu as changé de media (type et marque) comme le suggère Stef, télécharge à nouveau ton image ISO. :wink:

par **Stef** » 12 Mar 2008 23:08

Oui c'est ce que j'allais suggerer, il se peut que ton image soit corrompue !
Essaye de la retélégarger ou sinon essaye de créer une image iso à partir d'un cd en ta possession et essaye de la graver sur ton CDR-W.
Comme ca on sera fixé. :wink:

par **tahlmo** » 13 Mar 2008 0:31

L'image n'étais pas corrompue et le problème ne vient pas de là. En essayant de graver d'autres fichiers ou une autre image j'ai la même erreur.

par **Stef** » 13 Mar 2008 0:44

Bon ! On va bien trouver le problème.........
Déjà, on va mettre ton Nero à jour. Tu es en 6.6.0.8, fais un petit tour dans notre rubrique téléchargement et passe en 6.6.1.15a
http://www.gravure-news.com/download/6.php
Et retente une gravure sur ton CDR-W.

par **tahlmo** » 13 Mar 2008 7:22

Désolé

le problème persiste malgré la mise à jour de Nero.

par **Stef** » 13 Mar 2008 12:01

La gravure DVD fonctionne-t-elle correctement ?
Essaye un autre logiciel de gravure ImgBurn spécialisé dans la création / gravure d'image ISO, il est très facile d'emploi :
http://www.gravure-news.com/download/197.php

par **tahlmo** » 13 Mar 2008 15:52

J'ai gravé le fichier .iso sur DVD-RW (en tant que fichier, pas en tant qu'image). La gravure est arrivée à son terme sans problème, seulement une fois que j'essayais de lire le DVD il me mettais qu'il étais vide, et je ne voyais rien dedans.

J'ai essayé avec 2 autres logiciels de gravure, mais je n'arrive pas à la fin de la gravure.

Voici les messages d'erreur que j'obtiens :

pour CDBurnerXP

et pour ImgBurn
d'abord

puis

par **Stef** » 13 Mar 2008 16:54

On y voit un peu plus clair sur l'erreur :
Erreur materiel - Error calibration power
Ca sent pas très bon tout ca ! J'ai peur que ton graveur ai un pet au casque .
As-tu la possibilité de l'installer et de le tester dans une autre machine ?
Je t'avais posé une autre question supra, la gravure DVD fonctionne-t-elle correctement ?

par **tahlmo** » 13 Mar 2008 17:14

pour la gravure DVD c'est ce que j'ai mis au début de mon message précédent, non ?

Pour ce qui est de le tester sur une autre machine je crains que ce ne soit pas possible. D'abord parce que c'est installé sur un portable, et ensuite parce que je n'ai pas d'autre ordinateur sur lequel l'installer.

Si vraiment il n'y a rien à faire j'essaierais de voir si je peux me faire graver le CD par un ami, mais c'est tout de même dommage si c'est le lecteur lui-même qui ne marche pas (en même temps ça ne m'étonne pas, mon ordinateur tombe en ruine petit à petit

)

par **popzz** » 13 Mar 2008 21:19

Bonsoir
Puisqu'il n'y a pas d'autre possibilte il serait judicieux de proposer la desinstallion de tout logiciel de lecteurs virtuel non?
A tester

Gravure-News

Problème de gravure : mauvais réglages ?

Problème de gravure : mauvais réglages ?

Qui est en ligne