Gravure-News

[luk]

Bonjour,
J'ai déjà lu beaucoup de sujet là dessus sans réponse. Alors, je croise les doigts !

Je gravais avant sur des philips 1-4x ss pb. J'ai acheté 25 DVD 1-8x de la meme marque mais la gravure m'indique que le DVD est "illégal" puis echec sur "disk at once". La gravure n'a meme pas commencé !! Sur des DVD RW j'ai pas de soucis.

Alors que faire ?

Ordi : Portable samsung 2.8GHz, 512 de ram.
Graveur DVD+RW RW8151 (sans aucune autre précision ! pas de maj possible)
NERO 6 - XP


Merci beaucoup à ceux qui prendrons le temps de m'aider.

Recorder: < DVD+RW RW8165> Version: 1.01 - HA 1 TA 0 - 6.0.0.17
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2060AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
DVD+RW RW8165 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523632kB)
Free physical memory: 298MB (305588kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.12.2004
NeroAPI
13:43:05 #1 Phase 112 File APIProgress.cpp, Line 238
DVD-Video files reallocation started

13:43:05 #2 Phase 114 File APIProgress.cpp, Line 238
DVD-Video files reallocation completed (no file modified)

13:43:05 #3 Phase 111 File APIProgress.cpp, Line 238
DVD-Video files sorted

13:43:05 #4 Text 0 File Reader.cpp, Line 118
Reader running

13:43:05 #5 Text 0 File Writer.cpp, Line 127
Writer DVD+RW RW8165 running

13:43:05 #6 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)

13:43:05 #7 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)

13:43:05 #8 Text 0 File Burncd.cpp, Line 3193
Turn on Disc-At-Once, using DVD media

13:43:08 #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286111 (508:01.36)

13:43:08 #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

13:43:08 #11 Text 0 File DlgWaitCD.cpp, Line 1920
Recorder: DVD+RW RW8165, Media type: DVD+R

13:43:08 #12 Text 0 File DlgWaitCD.cpp, Line 391
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:43:08 #13 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [ DVD+RW RW8165 ]
--------------------------------------------------------------

13:43:08 #14 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [ DVD+RW RW8165 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682264576, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

13:43:08 #15 Phase 24 File APIProgress.cpp, Line 238
Caching of files started

13:43:08 #16 Phase 25 File APIProgress.cpp, Line 238
Caching of files completed

13:43:08 #17 Phase 36 File APIProgress.cpp, Line 238
Burn process started at 4x (5 520 KB/s)

13:43:08 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:43:08 #19 SCSI -1066 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06C06000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

13:43:08 #20 Text 0 File DVDPlusRW.cpp, Line 1556
Set Booktype to DVD+R (10), set mode 'drive EEPROM' (0) on DVD+R media, return: 0 -> OK

13:43:08 #21 Text 0 File DVDPlusRW.cpp, Line 564
Start write address at LBA 0
DVD high compatibility mode: Yes

13:43:12 #22 SCSI -1046 File Cdrdrv.cpp, Line 1411
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x01430000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05

13:43:12 #23 CDR -1046 File Writer.cpp, Line 335
Illegal disc

13:43:12 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:43:12 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

13:43:12 #26 SCSI -1046 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05

13:43:12 #27 SCSI -1046 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05

13:43:12 #28 Phase 127 File APIProgress.cpp, Line 238
Generating DVD high compatibility borders

13:43:13 #29 Text 0 File DVDPlusRW.cpp, Line 1556
Set Booktype to DVD+RW (9), set mode 'drive EEPROM' (0) on DVD+R media, return: 0 -> OK

13:43:13 #30 CDR -1046 File WriterStatus.cpp, Line 162
Illegal disc

13:43:13 #31 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

13:43:13 #32 Phase 38 File APIProgress.cpp, Line 238
Burn process failed at 4x (5 520 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[luk]

J'ai racheter des philips 1-4x et ca grave !!!

Le dicton "qui peut le plus peut le moins" ne s'applique pas aux graveurs.

Si quelqu'un sait pourquoi, je suis preneur. J'ai 25DVD+R à utiliser !

Amicalement

(Je précise que mon graveur ne grave qu'en 4x, Nero me laisse pas le choix)

[mod="Koba"]J'ai édité ce message et supprimé le suivant. Tu n'es pas obligé de remplir le champ "Sujet" quand tu postes une réponse à un message. Ce n'est obligatoire que quand ton message est le premier du topic ! Evite surtout de commencer ce que tu as à dire dans le champ "Sujet" et de le poursuivre dans le corps du message, ça donne des résultats assez saugrenus ! [/mod]