Gravure-News

[philpassman]

Bonsoir!
Voilà mon problème:
Je veux graver des données sur un dvd double couche memorex avec mon graveur nec 2510 mais un message d'erreur apparait au tout début de la gravure: generation des cadres dvd de compatibilite superieure puis le disque est non valable , impossible d'effectuer la fonction disk at once, la gravure a 2,4x a échouée.

Quelqu'un a-t'il une solution?

merci d'avance

[Scaramanga]

Salut et bienvenue sur le forum de Gravure-News,

Peux tu nous coller le fichier log de Nero ?

Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.

En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:Program fileAheadNero, il se nomne NeroHistoryLog . On peut le visualier avec un éditeur de texte , bloc note de windows par exemple.

Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log.
tu peux le coller entre les balise [ code ] et [ /code ].

[philpassman]

voici mon log:


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'J:\nero 7\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0

Recorder: <_NEC DVD_RW ND-2510A> Version: 2.15 - HA 1 TA 1 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic STEALTH DVD >Version: - HA 1 TA 2 - 7.5.7.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L120AVV207-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : MSI CD-RW MS-8348 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic STEALTH DVD st3mp28 Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
MSI CD-RW MS-8348 H: CDRom0
_NEC DVD_RW ND-2510A I: CDRom1
Generic STEALTH DVD N: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 346MB (354856kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.1.2008
Compilation ISO
10:19:40 #1 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:19:41 #2 Text 0 File Isodoc.cpp, Line 6508
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:19:41 #3 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)

10:19:41 #4 Text 0 File Burncd.cpp, Line 3435
Turn on Disc-At-Once, using DVD media

10:19:41 #5 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4038495 (897:26.45, 7887MB)

10:19:41 #6 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO (enabled: CD)

10:19:41 #7 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD+R9 Double Layer

10:19:41 #8 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:19:41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4038496 (4038496) = #4038496/897:26.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4038496 blocks [Main]
--------------------------------------------------------------

10:19:41 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8270839808, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 4038496 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4038496 | 0 | 0x00
4038496 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:19:41 #11 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:19:41 #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

10:19:41 #13 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.

10:19:41 #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

10:19:41 #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 2.4x (3 324 Ko/s)

10:19:41 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:19:42 #17 Text 0 File DVDPlusDualLayer.cpp, Line 470
Disc finalized, LBA total Image size: 4038496 (7887MB), Last LBA L0: 2019263 (3943MB)

10:19:42 #18 Text 0 File DVDPlusDualLayer.cpp, Line 635
L0 Data Zone Capacity set to 2019264 (1ECFC0h, 3943MB) -> OK, confirmed setting

10:19:42 #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 662
Burning Layer 1

10:19:42 #20 Text 0 File DVDPlusDualLayer.cpp, Line 672
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

10:19:42 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 293
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x07013600: Len x804

10:19:42 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 293
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xC9 03 02 00 42 54 59 50 45 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24

10:19:42 #23 Text 0 File DVDR.cpp, Line 6450
Drive: _NEC DVD_RW ND-2510A
Book Type request [NEC]: DVD-ROM, write to RAM
Changing the Book Type was finished with error, return code -1066

10:19:42 #24 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: Yes

10:19:44 #25 SPTI -1046 File SCSIPassThrough.cpp, Line 293
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x06f90400: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

10:19:44 #26 CDR -1046 File Writer.cpp, Line 278
Illegal disc
I: _NEC DVD_RW ND-2510A

10:19:46 #27 SPTI -1046 File SCSIPassThrough.cpp, Line 293
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

10:19:46 #28 SPTI -1046 File SCSIPassThrough.cpp, Line 293
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

10:19:46 #29 Phase 127 File dlgbrnst.cpp, Line 1746
Generating DVD high compatibility borders

10:19:46 #30 CDR -1046 File WriterStatus.cpp, Line 161
Illegal disc
I: _NEC DVD_RW ND-2510A

10:19:46 #31 TRANSFER -24 File WriterStatus.cpp, Line 161
Could not perform end of Disc-at-once

10:19:46 #32 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 2.4x (3 324 Ko/s)

10:19:46 #33 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed

10:19:46 #34 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 22:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Scaramanga]

Tu devrais mettre à jour Nero , la dernière version est la 7.10.1.2.
http://www.gravure-news.com/download/201.php

Essais de désisntaller Daemon Tool.