Gravure-News

[pnlm]

Bonsoir,
Je n'arrive pas à graver une image avec nero 8030 sur un double couche voici le message d'erreur :
NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0

Recorder: <SONY DVD RW DW-G121A> Version: HYS1 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <SONY DVD RW DW-G121A >Version: HYS1 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DW-G121A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3250824AS atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DW-G121A G: CdRom0
SONY DVD-ROM DDU1615 H: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046956kB)
Free physical memory: 392MB (402148kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.7.2008
Graver une image DVD
00:09:45 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

00:09:46 #2 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

00:09:46 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4155839 (923:31.14, 8116MB)

00:09:46 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

00:09:46 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: SONY DVD RW DW-G121A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66
Disc Application Code: 0, Extended Information Indicators: 3

00:09:46 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

00:09:46 #7 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1)
2 indices, index0 (150) not provided
original disc pos #0 + 4155840 (4155840) = #4155840/923:31.15
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4155840 blocks [G: SONY DVD RW DW-G121A]
--------------------------------------------------------------

00:09:46 #8 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [G: SONY DVD RW DW-G121A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8511160320, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4155840 | 4155840 | 0x00
4155840 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

00:10:06 #9 Text 0 File SCSIPTICommands.cpp, Line 238
Error on LockVolume: Accès refusé.


00:10:06 #10 Text 0 File SCSIPTICommands.cpp, Line 288
SPTI - Error 5 on DismountVolue: Accès refusé.


00:10:16 #11 Text 0 File SCSIPTICommands.cpp, Line 238
Error on LockVolume: Accès refusé.


00:10:16 #12 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

00:10:16 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

00:10:16 #14 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.

00:10:16 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

00:10:16 #16 Phase 28 File dlgbrnst.cpp, Line 1762
Speed measurement started

00:10:16 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

00:10:16 #18 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400

00:13:10 #19 Text 0 File WriterStatus.cpp, Line 113
<G: SONY DVD RW DW-G121A> start writing Lead-Out at LBA 4155840 (3F69C0h), length 0 blocks

00:13:10 #20 Phase 29 File dlgbrnst.cpp, Line 1711
Speed measurement completed: 34,6x (47 776 Ko/s)

00:13:10 #21 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 2,4x (3 324 Ko/s)

00:13:10 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

00:13:10 #23 Text 0 File DVDPlusDualLayer.cpp, Line 495
Disc finalized, LBA total Image size: 4155840 (8116MB), Last LBA L0: 2077919 (4058MB)

00:15:35 #24 SPTI -1106 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x04ce1400: Len xc
0x00 0A 00 00 00 00 00 00 00 1F B4 E0

00:15:35 #25 Text 0 File DVDPlusDualLayer.cpp, Line 671
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)

00:15:35 #26 CDR -1106 File ThreadedTransferInterface.cpp, Line 1754
Power calibration error
G: SONY DVD RW DW-G121A

00:15:35 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1754
Could not perform start of Disc-at-once

00:15:35 #28 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

00:15:35 #29 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 2,4x (3 324 Ko/s)

00:15:35 #30 Text 0 File SCSIPTICommands.cpp, Line 288
SPTI - Error 5 on DismountVolue: Accès refusé.


00:15:38 #31 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

00:15:38 #32 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Si quelqu'un a une idée je suis preneur. D'avance merci

[pnlm]

Je vous envoie en plus la capture d'écran du message d'erreur :
d'avance merci

[Scaramanga]

Salut et bienvenue sur le forum de Gravure-News,

D'aprés le code d'erreur Atapi du log

Code: Tout sélectionner

Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03

IL s'agit d'un Pb de média.

http://www.cdr-zone.com/articles/atapi_ ... age_1.html

Vérifie si une màj du firwmare pour ton graveur est disponible.

[pnlm]

Bonjour,
J'ai bien trouvé la maj. Après installation toujours le même problème. Merci tout de même mais si vous avez une autre explication je suis preneur.
D'avance merci