gravure impossible dvd-r...

Forum de support des graveurs et périphériques Lite-On.

gravure impossible dvd-r...

Messagepar gendoji » 25 Jan 2007 17:25

Bonjour,

depuis quelques temps je rencontre le problème suivant avec mon graveur dvdrw drw-6s160p lorsque je veux graver des DVD:
j'utilise Nero 6 comme logiciel et (normalement) des dvd-r (Maxell)
lorsque je lance la gravure de divx avec nero aucun problème jusqu'à la fin où il me dit que la gravure c'est terminée avec succés, mais lorsque je lance le dvd pour vérifier que tout fonctionne correctement impossible, mon poste de travail ne repond plus et je suis obligé d'enlever le DVD pour que le poste de travail reponde normalement.
j'ai essayé ensuite avec des dvd-rw et là aucun problème tout fonctionne normalement.
J'ai également essayé avec des dvd+r et là tout fonctionne également.
le problème viendrait surement d'une incompatibilité entre mon graveur et les dvd-r mais là où je ne comprend rien c'est que d'une part d'après Nero infotool mon graveur supporte aussi bien les dvd+r que les dvd-r et d'autre part j'ai déjà gravé des dvd-r (les même que ceux avec lesquels ça ne fonctionne plus)sans aucun problème.
Je n'est qu'à utiliser des dvd+r me direz vous, mais le soucis c'est qu'il me reste environ 80 dvd-r à utiliser et surtout j'aimerais comprendre ce qui à bien pu se passé...
En espérant que vous puissiez m'aider, merci pour vos réponses
gendoji
Nouveau Membre
 
Messages: 6
Enregistré le: 25 Jan 2007

Messagepar Scaramanga » 25 Jan 2007 20:03

Salut et bienvenue sur le forum de Gravure-News,

Ton graveur a t il le dernier firmware disponible ?

http://www.gravure-news.com/html/arts/06/page01.php
http://www.liteonit.com/global/index.ph ... &Itemid=75

As tu la dernière version de Nero 6 ?

http://www.gravure-news.com/download/6.php

:wink:
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14178
Enregistré le: 05 Sep 2002

Messagepar gendoji » 25 Jan 2007 21:36

salut et merci de ton aide,
j'ai tout d'abord vérifié la version de nero qui n'était pas à jour.J'ai donc fait la mise à jour.
Ensuite avec nero info Tool j'ai regardé la version de mon firmware: PSG6
sur le site du constructeur je n'ai pas trouvé de mise à jour ni aucune info d'ailleurs sur mon graveur.
J'ai ensuite tenté de graver un DVD-r et la encore un échec avec le même cas de figure que précédemment; une petite amélioration tout de même mon poste de travail n'est plus bloqué et j'ai pu faire un clic droit pour voir s'il reconnaissait le DVD, en faisant un clic droit j'ai donc essayé de l'ouvrir, puis de l'explorer dans les 2 cas même réponse: inserer disque dans lecteur.
gendoji
Nouveau Membre
 
Messages: 6
Enregistré le: 25 Jan 2007

Messagepar gendoji » 25 Jan 2007 22:31

Du nouveau j'ai essayé de graver un fichier image avec un dvd-r et la pas de problème,par contre en ce qui concerne les dvd de données le problème reste le même...
gendoji
Nouveau Membre
 
Messages: 6
Enregistré le: 25 Jan 2007

Messagepar Scaramanga » 26 Jan 2007 5:50

Arf ouais..Le drw-6s160p est un graveur OEM.
http://club.cdfreaks.com/showthread.php?t=191531
La màj est un peut plus compliquée...Attention.
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14178
Enregistré le: 05 Sep 2002

Messagepar gendoji » 26 Jan 2007 13:44

j'ai telechargé et installé le firmware PV9N grâce au lien que tu m'as donné. j'ai ensuite essayé de graver un DVD-r: succés. J'ai donc essayé d'en regraver un autre et là même souci que précedemment. j'ai redemarré mon ordi regravé un dvd: succés; j'ai essayé une autre gravure: meme souci dvd impossible à ouvrir. En fait à chaque première gravure quand je demarre mon ordi le dvd et lisible mais si j'essaye d'en faire une autre sans redémarrer mon ordi ça ne marche plus.
je ne sais pas si ca à de l'importance et si c'est normal mais après l'installation du firmware mon graveur n'est plus reconnu comme un dvdrw drw-6s160p mais comme un dvdrw shw-160p6s...
gendoji
Nouveau Membre
 
Messages: 6
Enregistré le: 25 Jan 2007

Messagepar Scaramanga » 26 Jan 2007 13:50

Peux tu nous coller le fichier log de Nero ?

Il y a t'il un màj pour le chipset de ta carte mére ?
Avatar de l’utilisateur
Scaramanga
Administrateur®
Administrateur®
 
Messages: 14178
Enregistré le: 05 Sep 2002

Messagepar gendoji » 26 Jan 2007 14:43

voici l'historique de mon fichier log quant à ma carte mère tout semble être à jour

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Version de Nero : 6.6.0.5
Graveur : <DVDRW DRW-6S160P> Version: PSG6 - HA 0 TA 0 - 6.6.0.5
Pilote d'adaptateur :<atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM : <JU3553Y HSW640N >Version: 1.0 - HA 6 TA 0 - 6.6.0.5
Pilote d'adaptateur :<a2trgbws> HA 6

=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW DRW-6S160P atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 a2trgbws Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW DRW-6S160P D: CDRom4
JU3553Y HSW640N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047024kB)
Free physical memory: 362MB (371324kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.1.2007
CD-ROM (ISO)
20:11:42 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:11:42 #2 Text 0 File Burncd.cpp, Line 2870
DVDRW DRW-6S160P
Protection contre les ruptures activés

20:11:42 #3 Text 0 File Reader.cpp, Line 127
Reader running

20:11:42 #4 Text 0 File Writer.cpp, Line 122
Writer DVDRW DRW-6S160P running

20:11:42 #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

20:11:42 #6 Text 0 File Burncd.cpp, Line 3155
Turn on Disque entier, using CD-R/RW media

20:11:46 #7 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 445499 ( 99:01.74), real: 79:59.69
Last address to be written: 390100 ( 86:43.25)

20:11:46 #8 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: YES (enabled: CD)

20:11:46 #9 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: DVDRW DRW-6S160P;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

20:11:46 #10 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

20:11:46 #11 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 390101 (390101) = #390101/86:41.26
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 390101 blocks [DVDRW DRW-6S160P]
--------------------------------------------------------------

20:11:46 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [DVDRW DRW-6S160P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 799234048, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
390101 | lead-out | 1 | 0x41 | 0x00

20:11:46 #13 Phase 24 File dlgbrnst.cpp, Line 1832
Début de mise en cache des fichiers

20:11:46 #14 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

20:11:46 #15 Phase 25 File dlgbrnst.cpp, Line 1832
Cache des fichiers terminé

20:11:46 #16 Phase 36 File dlgbrnst.cpp, Line 1832
Début de gravure à 24x (3 600 Ko/s)

20:11:46 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:11:46 #18 Text 0 File Mmc.cpp, Line 16308
StartDAO : CD-Text - Off

20:11:46 #19 Text 0 File Mmc.cpp, Line 21060
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

20:11:46 #20 Text 0 File Mmc.cpp, Line 16595
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 56 2b 1a

20:15:38 #21 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03860000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0xA2 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

20:15:38 #22 CDR -1135 File Writer.cpp, Line 311
Erreur écriture

20:15:38 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:15:38 #24 Phase 38 File dlgbrnst.cpp, Line 1832
La gravure a échoué à 24x (3 600 Ko/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05/10/2006 03:42:42
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 27/09/2006 22:53:22 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======




Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Version de Nero : 6.6.0.5 (Nero Express)
Graveur : <DVDRW DRW-6S160P> Version: PSG6 - HA 0 TA 0 - 6.6.0.5
Pilote d'adaptateur :<atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM : <JU3553Y HSW640N >Version: 1.0 - HA 6 TA 0 - 6.6.0.5
Pilote d'adaptateur :<ae6ocfvk> HA 6

=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW DRW-6S160P atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 ae6ocfvk Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW DRW-6S160P D: CDRom0
JU3553Y HSW640N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047024kB)
Free physical memory: 583MB (597784kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.1.2007
Compilation ISO
12:07:57 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:07:57 #2 Text 0 File Reader.cpp, Line 127
Reader running

12:07:57 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

12:07:57 #4 Text 0 File Burncd.cpp, Line 3155
Turn on Disque entier, using DVD media

12:08:22 #5 Phase 40 File dlgbrnst.cpp, Line 1832
Interruption par l'utilisateur

12:08:22 #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2327161 (517:08.61, 4545MB)

12:08:22 #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

12:08:23 #8 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: DVDRW DRW-6S160P
Medium not present

12:08:23 #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05/10/2006 03:42:42
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 27/09/2006 22:53:22 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======




Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Version de Nero : 6.6.0.5 (Nero Express)
Graveur : <DVDRW DRW-6S160P> Version: PSG6 - HA 0 TA 0 - 6.6.0.5
Pilote d'adaptateur :<atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM : <JU3553Y HSW640N >Version: 1.0 - HA 6 TA 0 - 6.6.0.5
Pilote d'adaptateur :<ae6ocfvk> HA 6

=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW DRW-6S160P atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 ae6ocfvk Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW DRW-6S160P D: CDRom0
JU3553Y HSW640N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047024kB)
Free physical memory: 524MB (537100kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.1.2007
Compilation ISO
12:09:23 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:09:23 #2 Text 0 File Reader.cpp, Line 127
Reader running

12:09:23 #3 Text 0 File Writer.cpp, Line 122
Writer DVDRW DRW-6S160P running

12:09:23 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

12:09:23 #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disque entier, using DVD media

12:09:23 #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2152425 (478:19.00, 4203MB)

12:09:23 #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

12:09:23 #8 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: DVDRW DRW-6S160P, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

12:09:23 #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:09:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2152576 (2152576) = #2152576/478:21.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152576 blocks [DVDRW DRW-6S160P]
--------------------------------------------------------------

12:09:23 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [DVDRW DRW-6S160P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4408475648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2152576 | lead-out | 1 | 0x41 | 0x00

12:09:23 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Début de mise en cache des fichiers

12:09:23 #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

12:09:23 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Cache des fichiers terminé

12:09:23 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Début de gravure à 6x (8 310 Ko/s)

12:09:23 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:09:23 #17 Text 0 File DVDR.cpp, Line 2260
Recording mode: Sequential Recording Mode

12:09:23 #18 Text 0 File Mmc.cpp, Line 21060
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

12:09:23 #19 Text 0 File DVDR.cpp, Line 2401
Start write address at LBA 0
DVD high compatibility mode: Yes

12:09:23 #20 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:10:37 #21 Text 0 File Cdrdrv.cpp, Line 1284
12:10:37.187 - DVDRW DRW-6S160P\H0 T0 : Queue again later

12:19:43 #22 Text 0 File WriterStatus.cpp, Line 116
<DVDRW DRW-6S160P > start writing Lead-Out at LBA 2152576 (20D880h), lenght 0 blocks

12:19:43 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:19:43 #24 Text 0 File DVDR.cpp, Line 2642
EndDAO: Last written address was 2152575

12:20:05 #25 Phase 37 File dlgbrnst.cpp, Line 1832
Gravure terminée avec succès à 6x (8 310 Ko/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05/10/2006 03:42:42
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 27/09/2006 22:53:22 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======




Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Version de Nero : 6.6.0.5 (Nero Express)
Graveur : <DVDRW DRW-6S160P> Version: PSG6 - HA 0 TA 0 - 6.6.0.5
Pilote d'adaptateur :<atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM : <JU3553Y HSW640N >Version: 1.0 - HA 6 TA 0 - 6.6.0.5
Pilote d'adaptateur :<ae6ocfvk> HA 6

=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW DRW-6S160P atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 ae6ocfvk Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW DRW-6S160P D: CDRom0
JU3553Y HSW640N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047024kB)
Free physical memory: 521MB (533804kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.1.2007
Compilation ISO
12:31:34 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:31:34 #2 Text 0 File Reader.cpp, Line 127
Reader running

12:31:34 #3 Text 0 File Writer.cpp, Line 122
Writer DVDRW DRW-6S160P running

12:31:34 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

12:31:34 #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disque entier, using DVD media

12:31:34 #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2152425 (478:19.00, 4203MB)

12:31:34 #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

12:31:34 #8 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: DVDRW DRW-6S160P, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

12:31:34 #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:31:34 #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2152576 (2152576) = #2152576/478:21.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152576 blocks [DVDRW DRW-6S160P]
--------------------------------------------------------------

12:31:34 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [DVDRW DRW-6S160P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4408475648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2152576 | lead-out | 1 | 0x41 | 0x00

12:31:34 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Début de mise en cache des fichiers

12:31:34 #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

12:31:34 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Cache des fichiers terminé

12:31:34 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Début de gravure à 6x (8 310 Ko/s)

12:31:34 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:31:34 #17 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

12:31:34 #18 Text 0 File DVDPlusRW.cpp, Line 606
Start write address at LBA 0
DVD high compatibility mode: Yes

12:40:59 #19 Text 0 File WriterStatus.cpp, Line 116
<DVDRW DRW-6S160P > start writing Lead-Out at LBA 2152576 (20D880h), lenght 0 blocks

12:40:59 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:41:23 #21 Phase 37 File dlgbrnst.cpp, Line 1832
Gravure terminée avec succès à 6x (8 310 Ko/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05/10/2006 03:42:42
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 27/09/2006 22:53:22 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======




Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <DVDRW DRW-6S160P> Version: PSG6 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JU3553Y HSW640N >Version: 1.0 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW DRW-6S160P atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 arzq6usd Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW DRW-6S160P D: CDRom0
JU3553Y HSW640N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047024kB)
Free physical memory: 520MB (533336kB)
Memory in use : 49
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.1.2007
ISO compilation
19:56:16 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:56:16 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

19:56:16 #3 Text 0 File Reader.cpp, Line 124
Reader running

19:56:16 #4 Text 0 File Writer.cpp, Line 122
Writer DVDRW DRW-6S160P running

19:56:16 #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

19:56:16 #6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

19:56:16 #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2151263 (478:03.38, 4201MB)

19:56:16 #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

19:56:16 #9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: DVDRW DRW-6S160P, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

19:56:16 #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:56:16 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2151264 (2151264) = #2151264/478:3.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2151264 blocks [DVDRW DRW-6S160P]
--------------------------------------------------------------

19:56:16 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [DVDRW DRW-6S160P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4405788672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2151264 | lead-out | 1 | 0x41 | 0x00

19:56:16 #13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:56:16 #14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:56:16 #15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

19:56:16 #16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

19:56:16 #17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

19:56:16 #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 6x (8 310 KB/s)

19:56:16 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:56:16 #20 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

19:56:16 #21 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

19:56:16 #22 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:57:17 #23 Text 0 File Cdrdrv.cpp, Line 1200
19:57:17.078 - D: DVDRW DRW-6S160P : Queue again later

20:06:22 #24 Text 0 File WriterStatus.cpp, Line 116
<DVDRW DRW-6S160P > start writing Lead-Out at LBA 2151264 (20D360h), lenght 0 blocks

20:06:22 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:06:22 #26 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 2151263

20:06:46 #27 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 6x (8 310 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05/10/2006 03:42:42
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 27/09/2006 22:53:22 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 23:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======




Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <DVDRW DRW-6S160P> Version: PSG6 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JU3553Y HSW640N >Version: 1.0 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW DRW-6S160P atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 arzq6usd Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW DRW-6S160P D: CDRom0
JU3553Y HSW640N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047024kB)
Free physical memory: 262MB (268564kB)
Memory in use : 74
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.1.2007
Burn DVD Image
21:18:09 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

21:18:09 #2 Text 0 File Reader.cpp, Line 124
Reader running

21:18:09 #3 Text 0 File Writer.cpp, Line 122
Writer DVDRW DRW-6S160P running

21:18:09 #4 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

21:18:10 #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1970294 (437:50.44, 3848MB)

21:18:10 #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

21:18:10 #7 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: DVDRW DRW-6S160P, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

21:18:10 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:18:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1970295 (1970295) = #1970295/437:50.45
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1970295 blocks [DVDRW DRW-6S160P]
--------------------------------------------------------------

21:18:10 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [DVDRW DRW-6S160P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4035164160, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1970295 | lead-out | 1 | 0x41 | 0x00

21:18:10 #11 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

21:18:10 #12 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

21:18:10 #13 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

21:18:10 #14 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

21:18:10 #15 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

21:18:10 #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11 080 KB/s)

21:18:10 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

21:18:10 #18 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

21:18:10 #19 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

21:18:10 #20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:19:13 #21 Text 0 File Cdrdrv.cpp, Line 1200
21:19:13.718 - D: DVDRW DRW-6S160P : Queue again later

21:25:42 #22 Text 0 File WriterStatus.cpp, Line 116
<DVDRW DRW-6S160P > start writing Lead-Out at LBA 1970295 (1E1077h), lenght 0 blocks

21:25:42 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:25:42 #24 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 1970287

21:26:13 #25 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 8x (11 080 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05/10/2006 03:42:42
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 27/09/2006 22:53:22 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 23:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======




Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PV9N - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JU3553Y HSW640N >Version: 1.0 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW DRW-6S160P atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 a1d2kc22 Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S D: CDRom0
JU3553Y HSW640N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047024kB)
Free physical memory: 498MB (510912kB)
Memory in use : 51
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.1.2007
Compilation ISO
11:22:46 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:22:46 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

11:22:46 #3 Text 0 File Reader.cpp, Line 124
Reader running

11:22:46 #4 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-160P6S running

11:22:46 #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:22:46 #6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

11:22:46 #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1965343 (436:44.43, 3838MB)

11:22:46 #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

11:22:46 #9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

11:22:46 #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:22:46 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1965344 (1965344) = #1965344/436:44.44
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1965344 blocks [LITE-ON DVDRW SHW-160P6S]
--------------------------------------------------------------

11:22:46 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4025024512, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1965344 | lead-out | 1 | 0x41 | 0x00

11:22:46 #13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:22:46 #14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:22:46 #15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

11:22:46 #16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

11:22:46 #17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

11:22:46 #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 6x (8 310 Ko/s)

11:22:46 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:22:46 #20 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

11:22:46 #21 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

11:22:46 #22 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:23:52 #23 Text 0 File Cdrdrv.cpp, Line 1200
11:23:52.921 - D: LITE-ON DVDRW SHW-160P6S : Queue again later

11:32:12 #24 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 1965344 (1DFD20h), lenght 0 blocks

11:32:12 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:32:12 #26 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 1965343

11:32:34 #27 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 6x (8 310 Ko/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05/10/2006 03:42:42
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 27/09/2006 22:53:22 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 23:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======




Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PV9N - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JU3553Y HSW640N >Version: 1.0 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW DRW-6S160P atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 a1d2kc22 Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S D: CDRom0
JU3553Y HSW640N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047024kB)
Free physical memory: 525MB (538268kB)
Memory in use : 48
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.1.2007
Compilation ISO
11:50:12 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:50:12 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

11:50:12 #3 Text 0 File Reader.cpp, Line 124
Reader running

11:50:12 #4 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-160P6S running

11:50:12 #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:50:12 #6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

11:50:13 #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2151263 (478:03.38, 4201MB)

11:50:13 #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

11:50:13 #9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

11:50:13 #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:50:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2151264 (2151264) = #2151264/478:3.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2151264 blocks [LITE-ON DVDRW SHW-160P6S]
--------------------------------------------------------------

11:50:13 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4405788672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2151264 | lead-out | 1 | 0x41 | 0x00

11:50:13 #13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:50:13 #14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:50:13 #15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

11:50:13 #16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

11:50:13 #17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

11:50:13 #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 6x (8 310 Ko/s)

11:50:13 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:50:13 #20 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

11:50:13 #21 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

11:50:13 #22 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:51:18 #23 Text 0 File Cdrdrv.cpp, Line 1200
11:51:18.437 - D: LITE-ON DVDRW SHW-160P6S : Queue again later

12:00:23 #24 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 2151264 (20D360h), lenght 0 blocks

12:00:23 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:00:23 #26 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 2151263

12:00:47 #27 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 6x (8 310 Ko/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05/10/2006 03:42:42
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 27/09/2006 22:53:22 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 23:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======




Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PV9N - HA 1 TA 3 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JU3553Y HSW640N >Version: 1.0 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 a5dysx0z Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S D: CDRom3
JU3553Y HSW640N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047024kB)
Free physical memory: 333MB (341456kB)
Memory in use : 67
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.1.2007
Compilation ISO
12:18:04 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:18:04 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

12:18:04 #3 Text 0 File Reader.cpp, Line 124
Reader running

12:18:04 #4 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-160P6S running

12:18:04 #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:18:04 #6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

12:18:05 #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2151263 (478:03.38, 4201MB)

12:18:05 #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

12:18:05 #9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

12:18:05 #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:18:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2151264 (2151264) = #2151264/478:3.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2151264 blocks [LITE-ON DVDRW SHW-160P6S]
--------------------------------------------------------------

12:18:05 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4405788672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2151264 | lead-out | 1 | 0x41 | 0x00

12:18:05 #13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:18:05 #14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:18:05 #15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

12:18:05 #16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

12:18:05 #17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

12:18:05 #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11 080 Ko/s)

12:18:05 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:18:05 #20 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

12:18:05 #21 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

12:18:05 #22 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:19:22 #23 Text 0 File Cdrdrv.cpp, Line 1200
12:19:22.578 - D: LITE-ON DVDRW SHW-160P6S : Queue again later

12:26:16 #24 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 2151264 (20D360h), lenght 0 blocks

12:26:16 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:26:16 #26 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 2151263

12:26:46 #27 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 8x (11 080 Ko/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05/10/2006 03:42:42
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 27/09/2006 22:53:22 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 23:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======




Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PV9N - HA 1 TA 3 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JU3553Y HSW640N >Version: 1.0 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 a5dysx0z Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S D: CDRom3
JU3553Y HSW640N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047024kB)
Free physical memory: 521MB (533816kB)
Memory in use : 49
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.1.2007
Compilation ISO
12:29:37 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 charact
gendoji
Nouveau Membre
 
Messages: 6
Enregistré le: 25 Jan 2007

Messagepar skander14 » 26 Jan 2007 15:59

Bonjour

=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3320620AS nvata Port 2 ID 0 DMA: Off
CdRomPeripheral : JU3553Y HSW640N 1.0 a5dysx0z Port 6 ID 0 DMA: Off

Mets déjà ton DD en mode DMA On
http://www.gravure-news.com/html/tuto/03/page01.php

A+
Config : XPproSP3, core2 duo E8400, 2Go de RAM 6400, Liteon LTD163, Toshiba 1612, Plextor Premium (1.06), Plextor PX755A (1.05 ), Benq 1640 (BSLB), Benq 1655 (BCDB), Benq 1650 (BCIC), Liteon LTR-52327S (QSOE), Liteon SHM-165P6S (MSOR), Samsung SH-203B (SB01)
skander14
Ours en Peluche
Membre permanent
 
Messages: 994
Enregistré le: 24 Fév 2005
Localisation: Ailleurs

Messagepar gendoji » 26 Jan 2007 16:59

bonjour skander14
comme tu me l'as suggéré j'ai essayé de mettre mon DD en DMA on. Mais en suivant le tuto avec le lien que tu m'as donné j'ai vu que pour le canal IDE principal comme le secondaire il été normalement activé "si disponible "(en mode transfert). donc pour être plus clair je ne sais pas comment mettre mon DD en DMA on avec le tuto a moins qu'il ne faille que j'applique la 2 ème partie du tuto où il faut désinstaller un canal IDE, dans quel cas je ne sais pas quel canal IDE désinstaller car je ne sais pas lequel correspond à mon DD.
gendoji
Nouveau Membre
 
Messages: 6
Enregistré le: 25 Jan 2007



  • Publicité

Retourner vers Graveurs Lite-On

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités

cron