Gravure-News

[garoloup]

Bonjour,

Je viens de m'acheter des DVD+RW 8x de chez Verbatim.

Et le surprise impossible de les graver avec mon NEC 3500

Cela tient il au fait que le 3500 ne soit que 4x pour les RW ?
Si oui, peut on contourner le probleme ?

[jafre]

ton graveur n'est pas tout jeune.
essaye de mettre a jour le firmware pour qu'il reconnaisse les nouveau medias.
j'ai peur que les DVD+RW en 8x ne soit pas de bonne qualité.
par contre les DVD-RW 6x de chez Verbatim sont super.

[garoloup]

J'ai mis a jour le graveur, j'ai pris le dernier nero, j'ai essaye deepburner...

Rien n'y fait.

Voici le log de Nero:
Fred



Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0

Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.1B - HA 1 TA 1 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L15 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3250620A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163B E: CDRom0
_NEC DVD_RW ND-3500AG F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 563MB (577272kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.4.2007
Compilation ISO
08:06:49 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

08:06:49 #2 Text 0 File Isodoc.cpp, Line 6608
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

08:06:49 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

08:06:49 #4 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media

08:06:52 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 354499 ( 78:46.49, 692MB)

08:06:52 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

08:06:52 #7 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+RW

08:06:52 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD+R DL.)

08:06:52 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 177248 (177248) = #177248/39:23.23
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 177248 blocks [F: _NEC DVD_RW ND-3500AG]
1: TRM_DATA_MODE1 ()
2 indices, index0 (0) not provided
original disc pos #15 + 4 (4) = #19/0:0.19
relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4 blocks [F: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

08:06:52 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 363003904, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 363003904 363003904 363012096, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
177248 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
177248 | 1 | 0 | 0x41 | 0 | 0 | 0x00
177248 | 1 | 1 | 0x41 | 177248 | 177248 | 0x00
354496 | 2 | 0 | 0x41 | 0 | 0 | 0x00
354496 | 2 | 1 | 0x41 | 4 | 354496 | 0x00
354500 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

08:06:52 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

08:06:52 #12 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

08:06:52 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

08:06:52 #14 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.

08:06:52 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

08:06:52 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5 540 Ko/s)

08:06:52 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #177248

08:06:52 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #15): write at #15

08:06:52 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x08b82040: Len x804

08:06:52 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 05 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

08:06:52 #21 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 04 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

08:06:52 #22 Text 0 File DVDR.cpp, Line 7281
Drive: _NEC DVD_RW ND-3500AG
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished with error, return code -1065

08:06:52 #23 Text 0 File DVDR.cpp, Line 6662
Drive: _NEC DVD_RW ND-3500AG
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished with error, return code -1065

08:06:52 #24 Phase 98 File dlgbrnst.cpp, Line 1762
Start formatting disc before burning

08:06:52 #25 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x04 11 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x08b8a8c0: Len xc
0x00 82 00 08 00 23 05 40 98 00 00 00

08:06:52 #26 Phase 101 File dlgbrnst.cpp, Line 1762
Formatting disc failed

08:06:52 #27 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 177248
DVD high compatibility mode: Yes

08:06:52 #28 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752
Illegal disc
F: _NEC DVD_RW ND-3500AG

08:06:52 #29 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once

08:06:52 #30 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

08:06:52 #31 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5 540 Ko/s)

08:06:52 #32 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

08:06:54 #33 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed

08:06:54 #34 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[jafre]

ton graveur est limité à 4x pour les +RW.
il peut pas aller plus vite.

Graveur Multi-formats et double couche Nec ND-3500A :

Format de disque en écriture :
DVD-R (16x), DVD-RW (4x)
DVD+R (16x), DVD+RW (4x)
DVD+R9 (4x)
CD-R (48x) et CD-RW (24x)

Format de disque en lecture :
DVD (12x)
CD (48x)

Supporte les modes :
Fixed Packet, Variable Packet, TAO, SAO, DAO, Raw & Over-Burn

Lecture des CD :
DVD-ROM, DVD Video, CD-DA, CD Extra, CD Text, CD-ROM, CD-ROM XA, CD-I, CD-I Ready, CD-Bridge, Photo-CD, Video CD

Temps d'accès moyen :
DVD : 140 ms
CD : 120 ms

Interface : ATAPI, Ultra-DMA/33
Mémoire tampon : 2 Mo avec fonction Buffer Under-Run (protection contre les ruptures de tampon)
Poids : 0,9 Kg
Colori : Blanc ou Noir

site de nec :
http://www.de.nec.de/productdetail.php/id/1133

[franz99]

Bonjour
Je pense que la réponse à cette question est relativement simple et c'est sans doute pour cela que personne n'y a pensé plus tôt (!)

A l’aide du logiciel MCSE (Media Code Speed Edit) on peut connaître la liste de tous les MID codes du format DVD+RW que le dernier firmware 2.1B du NEC 3500 permet de graver,
la voici:



Si l’on examine maintenant le firmware d’un graveur plus récent comme le 1-02 du Nec-Optiarc AD-7173A
on trouve ceci:



Je pense donc que vous essayez de graver le MID code MKM-A03, code qui correspond effectivement à un DVD+RW Verbatim certifié 8x.
Le fichier log de Nero ne donne pas ce MID code lors de la tentative de gravure, ce qui semble logique puisque le firmware 2.1B du NEC 3500 ne le connait pas.

Cependant arrivez-vous au moins à lire le MID code de vos DVD+RW 8x Verbatim dans votre NEC 3500 (ou dans un autre graveur) à l’aide du logiciel DVD Identifier ou de Nero Info Tool ?