Gravure-News

par **scaryguy** » 03 Juil 2006 5:20

Salut à tous et os qui court !
J'ai un probleme avec nero depuis plusieurs semaines...les gravures foirent quasi-systematiquement (en tout cas sur des DVD-R)
En cherchant un peu je me suis apperçu grace à nero infotool que je n'ai aucun aspi installé sur windows. J'ai trouvé plusieurs liens d'update d'aspi (vers. 4.60, 4.71 et 4.72) mais a chaque fois que j'essaie d'installer l'une d'elle j'en arrive au même point, ASPICHK me dit qu'aucune version de ASPI32.SYS, WOWPOST.EXE, WINASPI.DLL, WNASPI32.DLL n'est installée.
J'ai l'impression de tourner en rond !
Quelqu'un peut-il m'expliquer svp... :praise:

j'ai déjà grillé bons nombres de DVD-R et je ne suis pas cresus (ni Einstein d'ailleurs).
Merci beaucoup d'avance.

par **scaryguy** » 03 Juil 2006 5:52

Au fait, lorsque j'utilise force aspi il me dit :"accès refusé" pour aspi32.sys
Moi pas comprendre...

par **Scaramanga** » 03 Juil 2006 6:11

Salut et bienvenue sur le forum de Gravure-News,

Ce n'est pas un pb de pilotes Aspi : Nero utilse ses propres pilotes et n'en necessite pas d'autre.

Peux tu nous coller le fichier Log de Nero ?

Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.

En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:Program fileAheadNero, il se nomne NeroHistoryLog . On peut le visualier avec un éditeur de texte , bloc note de windows par exemple.

Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log.
tu peux le coller entre les balise [ code ] et [ /code ].

par **scaryguy** » 03 Juil 2006 13:17

Ok alors voilà le dernier rapport log que j'ai eu hier:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=0 bytes, created 14/06/2006 14:18:26
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GSA-2166D>Version: 1.00 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <RQ2040E ACD575A >Version: 2.0B - HA 1 TA 1 - 6.6.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N030ATCS04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2212 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : RQ2040E ACD575A 2.0B vaxscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R2212 E: CDRom0
HL-DT-ST DVDRRW GSA-2166D G: CDRom2
RQ2040E ACD575A H: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 222MB (227824kB)
Free physical memory: 20MB (20632kB)
Memory in use : 90 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.7.2006
ISO compilation
18:49:13 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

18:49:14 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 35840KB of Memory

18:49:14 #3 Text 0 File Reader.cpp, Line 124
Reader running

18:49:14 #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRRW GSA-2166D running

18:49:14 #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

18:49:14 #6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

18:49:50 #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1432895 (318:25.20, 2798MB)

18:49:50 #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

18:49:50 #9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRRW GSA-2166D, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

18:49:50 #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW; DVD DL; DVD-RAM.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD DL; DVD-RAM.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD DL; DVD-RAM.)

18:49:51 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1432896 (1432896) = #1432896/318:25.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1432896 blocks [HL-DT-ST DVDRRW GSA-2166D]
--------------------------------------------------------------

18:49:51 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRRW GSA-2166D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2934571008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1432896 | lead-out | 1 | 0x41 | 0x00

18:49:52 #13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:49:52 #14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

18:49:52 #15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

18:49:52 #16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

18:49:52 #17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

18:49:52 #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5 540 KB/s)

18:49:52 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:49:52 #20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: C36BF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

18:49:52 #21 Text 0 File DVDR.cpp, Line 5533
Drive: HL-DT-ST DVDRRW GSA-2166D
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

18:49:52 #22 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

18:57:26 #23 SPTI -1093 File SCSIPassThrough.cpp, Line 289
G: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 E0 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 02
Buffer x07810000: Len x10000
0x6D B4 16 8D B1 EE 9D ED 09 AE 9B 6D AA DB 6D 0B
0x1B 24 09 BB B3 36 9A 68 01 F2 A5 DB 3D 08 B3 50
0x36 6C D0 CD 1B 6D A1 26 84 D7 6D B6 BF B3 6D A2

18:57:26 #24 CDR -1093 File Writer.cpp, Line 311
No seek complete
G: HL-DT-ST DVDRRW GSA-2166D

18:57:26 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:57:26 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

18:57:26 #27 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5 540 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=?.?.?.?, size=0 bytes, created 14/06/2006 14:18:25
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 01:12:26 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 16, 1, size=99584 bytes, created 10/06/2005 17:12:12 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 16, 1, size=29696 bytes, created 10/06/2005 17:11:50 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 16, 1, size=8704 bytes, created 10/06/2005 17:12:14 (InCD4 driver for win NT/2K/XP)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 01:59:41 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

J'ai contacté nero et LG et aucun des deux n'a de solution !
Je n'ai plus que vous.... :praise:

par **Scaramanga** » 03 Juil 2006 17:47

As tu réellemnt 222 Mo de RAM !? Encore le fichier log de Nero qui délire ....

Code: Tout sélectionner: Physical memory : 222MB (227824kB) Free physical memory: 20MB (20632kB)

Tu peux déjà mettre à jour le firmware de ton graveur, une V1.01 semble disponible.

Code: Tout sélectionner: Recorder: <HL-DT-ST DVDRRW GSA-2166D>Version: 1.00 - HA 1 TA 2 - 6.6.1.4

par **scaryguy** » 08 Juil 2006 18:55

Salut, désolé j'ai mis un peu de temps pour répondre mais je suis très pris par mon boulot en ce moment...
Bon j'ai mis mon firmware de graveur à jour, ça a marché pour les deux première gravure que j'ai effectué mais maintenant c'est reparti, ça plante à nouveau à chaque fois.
Je commence à avoir une pile impressinnante de dvd dans ma poubelle!
Le message de néro après l'echec de gravure est différent...
Je joint le log de ma dernière gravure effectuée à l'instant.
Au fait, ça pose un pb d'avoir 222m de ram? (moi pas être très callé en informatique!)
En tout cas merci encore pour ton aide, le schmilblik avance...
Voici le log:

Code: Tout sélectionner: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=0 bytes, created 14/06/2006 14:18:26 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/07/2006 19:16:52 Nero Version: 6.6.0.9 Internal Version: 6, 6, 0, 9h (Nero Express) Recorder: <HL-DT-ST DVDRRW GSA-2166D>Version: 1.01 - HA 3 TA 0 - 6.6.0.9 Adapter driver: <> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <RQ2040E ACD575A >Version: 2.0B - HA 2 TA 0 - 6.6.0.9 Adapter driver: <vaxscsi> HA 2 === Scsi-Device-Map === DiskPeripheral : IC25N030ATCS04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R2212 atapi Port 1 ID 0 DMA: On CdRomPeripheral : RQ2040E ACD575A 2.0B vaxscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R2212 E: CDRom0 RQ2040E ACD575A H: CDRom1 HL-DT-ST DVDRRW GSA-2166 F: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 36700160 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 222MB (227824kB) Free physical memory: 28MB (29276kB) Memory in use : 87 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.7.2006 Compilation ISO 11:53:53 #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:53:55 #2 Text 0 File Reader.cpp, Line 127 Reader running 11:53:55 #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRRW GSA-2166D running 11:53:56 #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:53:56 #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 11:53:56 #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2095615 (465:41.40, 4092MB) 11:53:56 #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 11:53:57 #8 Text 0 File DlgWaitCD.cpp, Line 2452 Recorder: HL-DT-ST DVDRRW GSA-2166D, Media type: DVD+R Disc Manufacturer ID: MPOMEDIA, Media Type ID: 080, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 11:53:57 #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:53:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2095616 (2095616) = #2095616/465:41.41 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2095616 blocks [HL-DT-ST DVDRRW GSA-2166D] -------------------------------------------------------------- 11:53:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRRW GSA-2166D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4291821568, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2095616 | lead-out | 1 | 0x41 | 0x00 11:54:08 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:54:09 #13 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 11:54:09 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:54:09 #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5 540 Ko/s) 11:54:09 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2655 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:54:09 #17 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MPOMEDIA Media type ID: 080 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 50 4F 4D 45 - 44 49 41 30 38 30 00 38 ...MPOMEDIA080.8 23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 11:54:09 #18 Text 0 File DVDR.cpp, Line 4985 Drive: HL-DT-ST DVDRRW GSA-2166D Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:54:09 #19 CDR -1207 File DVDR.cpp, Line 4915 Book Type automatically set to: DVD-ROM 11:54:09 #20 Text 0 File DVDPlusRW.cpp, Line 652 Start write address at LBA 0 DVD high compatibility mode: No 11:58:37 #21 SCSI -400 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x075E0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x80 Sense Qual: 0x04 CDB Data: 0x2A 0x00 0x00 0x00 0xDA 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x80 0x04 11:58:37 #22 CDR -400 File Writer.cpp, Line 311 Unspecified target error 11:58:37 #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:58:37 #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:58:58 #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5 540 Ko/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=?.?.?.?, size=0 bytes, created 14/06/2006 14:18:25 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 01:12:26 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 16, 1, size=99584 bytes, created 10/06/2005 17:12:12 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 16, 1, size=29696 bytes, created 10/06/2005 17:11:50 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 16, 1, size=8704 bytes, created 10/06/2005 17:12:14 (InCD4 driver for win NT/2K/XP) File 'Drivers\vaxscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 18/06/2006 15:59:27 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

par **Scaramanga** » 08 Juil 2006 19:27

Au fait, ça pose un pb d'avoir 222m de ram?

222 Mo déjà c'est une valeur louche, c'est toujours multiple de 256.
Mais le fichier log de nero annonce souvent des bizarreries quant aux valuer de la RAM.
Faudra tout de même avoir le coeur net sur ce pb de mémoire. De nos jour 512 Mo est un minimum.

Met à jour ta version de Nero > 6.6.1.4 !!!!
http://www.gravure-news.com/download/6.php

par **scaryguy** » 08 Juil 2006 21:12

Je viens de mettre à jour nero (j'avais aussi fais un test avec la version 7 il y a deux semaines, même résultat).
Comment puis-je vérifier si ce qu'annonce néro (222M ram) est faux?
Encore un échec, voici le dernier log :

Code: Tout sélectionner: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=0 bytes, created 14/06/2006 14:18:26 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/07/2006 19:16:52 NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d (Nero Express) Recorder: <HL-DT-ST DVDRRW GSA-2166D>Version: 1.01 - HA 1 TA 3 - 6.6.1.4 Adapter driver: <USB 1.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <RQ2040E ACD575A >Version: 2.0B - HA 1 TA 1 - 6.6.1.4 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N030ATCS04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R2212 atapi Port 1 ID 0 DMA: On CdRomPeripheral : RQ2040E ACD575A 2.0B vaxscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R2212 E: CDRom0 HL-DT-ST DVDRRW GSA-2166D F: CDRom3 RQ2040E ACD575A H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 36700160 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 222MB (227824kB) Free physical memory: 6MB (6800kB) Memory in use : 97 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.7.2006 ISO compilation 15:00:22 #1 Text 0 File Isodoc.cpp, Line 6475 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 15:00:24 #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 35840KB of Memory 15:00:25 #3 Text 0 File Reader.cpp, Line 124 Reader running 15:00:25 #4 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRRW GSA-2166D running 15:00:25 #5 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 15:00:25 #6 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 15:00:46 #7 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2095615 (465:41.40, 4092MB) 15:00:46 #8 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 15:00:46 #9 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: HL-DT-ST DVDRRW GSA-2166D, Media type: DVD+R Disc Manufacturer ID: MPOMEDIA, Media Type ID: 080, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 15:00:46 #10 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:00:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2095616 (2095616) = #2095616/465:41.41 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2095616 blocks [HL-DT-ST DVDRRW GSA-2166D] -------------------------------------------------------------- 15:00:47 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [HL-DT-ST DVDRRW GSA-2166D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4291821568, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2095616 | lead-out | 1 | 0x41 | 0x00 15:00:47 #13 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 15:00:47 #14 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 15:00:47 #15 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 15:00:48 #16 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 15:00:48 #17 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 15:00:48 #18 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 4x (5 540 KB/s) 15:00:48 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:00:48 #20 Text 0 File Cdrdrv.cpp, Line 8647 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MPOMEDIA Media type ID: 080 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 50 4F 4D 45 - 44 49 41 30 38 30 00 38 ...MPOMEDIA080.8 23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 15:00:48 #21 Text 0 File DVDR.cpp, Line 5533 Drive: HL-DT-ST DVDRRW GSA-2166D Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 15:00:48 #22 CDR -1207 File DVDR.cpp, Line 5463 Book Type automatically set to: DVD-ROM 15:00:48 #23 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 15:04:43 #24 SPTI -1 File SCSIPassThrough.cpp, Line 289 F: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x80 Sense Qual: 0x04 CDB Data: 0x2A 00 00 00 DA C0 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 80 04 Buffer x07810000: Len x10000 0xFA A9 69 A5 75 C2 48 28 40 F4 E1 B3 89 F7 AE 0C 0xFE 01 2F 4E 95 20 12 76 58 63 F0 F8 E9 E9 E2 4D 0x38 AE 86 65 E3 D5 2D 3B 36 DA 61 34 90 1F F4 CF 15:04:43 #25 CDR -1 File Writer.cpp, Line 311 Unspecified Recorder Error F: HL-DT-ST DVDRRW GSA-2166D 15:04:44 #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 15:04:49 #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 15:05:10 #28 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 4x (5 540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=?.?.?.?, size=0 bytes, created 14/06/2006 14:18:25 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 01:12:26 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 16, 1, size=99584 bytes, created 10/06/2005 17:12:12 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 16, 1, size=29696 bytes, created 10/06/2005 17:11:50 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 16, 1, size=8704 bytes, created 10/06/2005 17:12:14 (InCD4 driver for win NT/2K/XP) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 01:59:41 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

par **Scaramanga** » 08 Juil 2006 22:32

Comment puis-je vérifier si ce qu'annonce néro (222M ram) est faux?

Demarrer /panneua de configuration/Systéme, dans l'onglet général tu trouvera la valeur de la RAM .

Je pense que c'est Nero qui délire, avec si peux de RAM ton PC devrait ramer grave...

par **scaryguy** » 09 Juil 2006 0:37

Euh.......mon pc tourne avec 224m de ram

Je ne sais pas si je dois rire ou bien le balancer par la fenêtre et m'en acheter un autre!!!
Bref, par rapport à mon pb de gravure penses-tu que ça vient de ça?
Si non, que faire?
:praise:

ô ce cur....

par **Scaramanga** » 09 Juil 2006 8:16

Je pense qu'il fait déjà réglé ce pb de mémoire.
Quel est la valeur de la mémoire insatllé sur ton PC, nb de barette ?

Pour tester il existe des utilitaires :
http://www.pcastuces.com/pratique/windo ... emoire.htm
http://oca.microsoft.com/en/windiag.asp

Gravure-News

pb avec aspi

pb avec aspi

Qui est en ligne