) , j'ai un pb de gravure vraiment bizarre :
J'ai un Acer 2012 WLMI avec le graveur Hitachi (apparement aucune maj firmware possible ?).
Je grave avec Nero 6.3.1.17 sur des dvd+r traxdata version 1.1 4,7Go.
Win XP avec log gravure xp desactivé.
Je lance la gravure de fichiers, la gravure demarre et au bout d'un certain temps c'est l'echec ( génération de cadres dvd de compatibilité supérieure, puis echec.).
Le plus curieux c'est qu'apres avoir foiré ce dvdr je peut en remettre un et la ca grave sans probleme. Donc a chaque reboot de mon pc si je veux graver je suis obliger de foirer un dvd ... sympa vous me suivez ?
Voici le fichier .log si ca peut aider :
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Version de Nero : 6.3.1.17
Graveur : <MATSHITA DVD-RAM UJ-820S>Version: 1.00 - HA 1 TA 0 - 6.3.1.17
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <MATSHITA DVD-RAM UJ-820S >Version: 1.00 - HA 1 TA 0 - 6.3.1.17
Pilote d'adaptateur :<atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-820S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d343port Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-820S E: CDRom0
Generic DVD-ROM G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 256MB (262428kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.12.2004
Compilation ISO
13:26:24 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:26:24 #2 Text 0 File Reader.cpp, Line 118
Reader running
13:26:24 #3 Text 0 File Writer.cpp, Line 124
Writer MATSHITA DVD-RAM UJ-820S running
13:26:24 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
13:26:24 #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disque entier, using DVD media
13:27:09 #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2098491 (466:19.66, 4098MB)
13:27:09 #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
13:27:09 #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: MATSHITA DVD-RAM UJ-820S, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
13:27:09 #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Inconnu. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM.)
13:27:09 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2098492 (2098492) = #2098492/466:19.67
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2098492 blocks [MATSHITA DVD-RAM UJ-820S ]
--------------------------------------------------------------
13:27:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [MATSHITA DVD-RAM UJ-820S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4297711616, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2098492 | lead-out | 1 | 0x00 | 0x41
13:27:09 #12 Phase 24 File dlgbrnst.cpp, Line 1845
Début de mise en cache des fichiers
13:27:10 #13 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
13:27:10 #14 Phase 25 File dlgbrnst.cpp, Line 1845
Cache des fichiers terminé
13:27:10 #15 Phase 36 File dlgbrnst.cpp, Line 1845
Début de gravure à 2,4x (3 324 Ko/s)
13:27:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:27:10 #17 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: R01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 52 30 31 01 38 ...RITEK...R01.8
23 54 37 09 00 5A 65 00 - AC 5F 14 14 0A 0A 0A 0A #T7..Ze.._......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
13:27:10 #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 21:53,223 (1313223ms) -> OK
13:27:10 #19 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes
13:27:15 #20 Text 0 File Cdrdrv.cpp, Line 1294
13:27:15.375 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:27:43 #21 Text 0 File Cdrdrv.cpp, Line 1294
13:27:43.921 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:27:44 #22 Text 0 File Cdrdrv.cpp, Line 1294
13:27:44.625 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:28:05 #23 Text 0 File Cdrdrv.cpp, Line 1294
13:28:05.250 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:28:26 #24 Text 0 File Cdrdrv.cpp, Line 1294
13:28:26.453 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:28:47 #25 Text 0 File Cdrdrv.cpp, Line 1294
13:28:47.515 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:29:08 #26 Text 0 File Cdrdrv.cpp, Line 1294
13:29:08.687 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:29:29 #27 Text 0 File Cdrdrv.cpp, Line 1294
13:29:29.937 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:29:51 #28 Text 0 File Cdrdrv.cpp, Line 1294
13:29:51.000 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:30:12 #29 Text 0 File Cdrdrv.cpp, Line 1294
13:30:12.250 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:30:33 #30 Text 0 File Cdrdrv.cpp, Line 1294
13:30:33.484 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:30:54 #31 Text 0 File Cdrdrv.cpp, Line 1294
13:30:54.765 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:31:15 #32 Text 0 File Cdrdrv.cpp, Line 1294
13:31:15.859 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:31:34 #33 Text 0 File Cdrdrv.cpp, Line 1294
13:31:34.906 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
13:31:37 #34 SCSI -400 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03310000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x05 0x77 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x05 0x74 0xA0 0x0A
0x00 0x32 0x00 0x00 0x03 0x01
13:31:37 #35 CDR -400 File Writer.cpp, Line 304
Erreur de cible non spécifiée
13:31:37 #36 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
13:31:37 #37 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
13:31:37 #38 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x83 0x00 0x00 0x30 0x05
13:31:37 #39 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x83 0x00 0x00 0x30 0x05
13:31:37 #40 Phase 127 File dlgbrnst.cpp, Line 1845
Génération des cadres DVD de compatibilité supérieure
13:31:37 #41 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
13:31:37 #42 CDR -1046 File WriterStatus.cpp, Line 164
Disque non valable
13:31:37 #43 TRANSFER -24 File WriterStatus.cpp, Line 164
Impossible d'effectuer la fonction Disc At Once
13:31:37 #44 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
13:31:37 #45 Phase 38 File dlgbrnst.cpp, Line 1845
La gravure a échoué à 2,4x (3 324 Ko/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 03:02:46
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
MERCI BCP POUR VOTRE AIDE !
Flux RSS