Gravure-News

[ravi]

bonjour à vous tous.
Je vous mets la copie du rapport de nero.
Je ne sais pas l'interpréter.
merci par avance d'une piste de solution.
Je suis sur amd k6.2 500,ai bien lu vos divers conseils,mis à jour ma carte mère,installé vb6,démonté et remonté néro,en vain.


Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/02 16:03:58
Nero Version: 5.5.10.54 (Nero Express)
Recorder: <LITE-ON LTR-52327S> Version: QS09 - HA 0 TA 0 - 5.5.10.54
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < 50X CD-ROM> Version: 5.3D - HA 0 TA 1 - 5.5.10.54
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
LITE-ON LTR-52327S (Target 0, J: Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
50X CD-ROM (Target 1, K: Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261628kB)
Free physical memory: 16MB (16512kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

25.1.2004
CD-ROM (ISO)
10:26:26 #1 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:26:26 #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated

10:26:26 #3 Text 0 File Reader.cpp, Line 115
Reader running

10:26:26 #4 Text 0 File Writer.cpp, Line 125
Writer LITE-ON LTR-52327S running

10:26:26 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

10:26:26 #6 Text 0 File Burncd.cpp, Line 3769
Turn on Track-At-Once, using CD-R/RW media

10:26:26 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 345127 (345127) = #345127/76:41.52
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

10:26:27 #8 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 359846 (79:59.71)
Last address to be written: 345126 (76:43.51)

10:26:27 #9 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

10:26:27 #10 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: LITE-ON LTR-52327S;
CDR code: 00 97 24 01; OSJ entry from: Taiyo Yuden Company Limited
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 18 01 (LI 97:24.01), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

10:26:27 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder LITE-ON LTR-52327S for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 707127296

10:26:27 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.

10:26:27 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 345127 (345127) = #345127/76:41.52
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 345125 blocks [LITE-ON LTR-52327S ]
--------------------------------------------------------------

10:26:27 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

10:26:27 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

10:26:27 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 52x (7 800 Ko/s)

10:26:27 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

10:26:27 #18 Text 0 File Mmc.cpp, Line 19092
Set BUFE: supported -> ON , SMART-BURN : ON

10:31:19 #19 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03730000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0x40 0xA4 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

10:31:19 #20 MMC -1135 File Writer.cpp, Line 333
Write error

10:31:19 #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

10:31:19 #22 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

10:31:19 #23 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state

10:31:19 #24 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack

10:31:19 #25 Text 0 File Mmc.cpp, Line 14085
<LITE-ON LTR-52327S > start Close Session

10:31:22 #26 SCSI -1176 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x00

10:31:22 #27 MMC -1176 File WriterStatus.cpp, Line 233
Session fixation error

10:31:22 #28 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation

10:31:22 #29 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation

10:31:22 #30 Text 0 File Mmc.cpp, Line 14085
<LITE-ON LTR-52327S > start Close Session

10:31:22 #31 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 52x (7 800 Ko/s)

10:31:22 #32 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/02 12:55:38
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69578 bytes, created 05/05/99 22:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00 (Adapter driver for rec)

Registry Keys:

[Scaramanga]

Salut et bienvenue sur Gravure News,

Physical memory : 255MB (261628kB)
Free physical memory: 16MB (16512kB)
Memory in use : 55 %

ça me semble incohérent ça ...?

[ravi]

j'en conviens,mais la pertinence de ta remarque ne m'éclaire guère

[gowap]

Peut etre rien a voir, mais en tous cas pas raisonnable :

Burn process failed at 52x (7 800 Ko/s)

[Maverick]

LITE-ON LTR-52327S (Target 0, J: Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
50X CD-ROM (Target 1, K: Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off

De plus le DMA n'es pas activé.

[ravi]

merci de vos réponses.
1/une "fuite" de mémoire"?
2/la vitesse de gravure serait trop rapide?
3/Sur le dma,j'ai bien tenté de l'activer,j'ai coché,rien à faire.Peut-être est-ce du à la jeunesse de mon matériel,lol:Amd k6.2.500??????qui ne le permet pas.
Je ne sais.
Ceci étant,tout a déjà marché avec le même matériel.
J'ai cherché,pas de modification en hard.
Mais installation de winiso et jet audio????la cause se trouve-t-elle là??
Je les ai donc enlevés.Même pb.
J'envisage donc une réinstall complète.
Qu'en pensez-vous?
Merci par avance