heu je suis repasser en version 6 de nero croyant ke ca venait de
la mais non ca marche toujours pas
voici le nouveau message d'erreur ke jai eu en essayant de graver
un dvd de données :
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 6.6.0.1
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS DVD-ROM LTD-166S>Version: DPS2 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-22CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS DVD-ROM LTD-166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS DVD-ROM LTD-166S E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261612kB)
Free physical memory: 81MB (83404kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.1.2006
ISO compilation
11:16:01 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:16:01 #2 Text 0 File Reader.cpp, Line 127
Reader running
11:16:01 #3 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 200j running
11:16:01 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:16:01 #5 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
11:16:01 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2231871 (495:58.21, 4359MB)
11:16:01 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
11:16:01 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HP DVD Writer 200j, Media type: DVD+R
11:16:01 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:16:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2231872 (2231872) = #2231872/495:58.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2231872 blocks [HP DVD Writer 200j]
--------------------------------------------------------------
11:16:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4570873856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2231872 | lead-out | 1 | 0x00 | 0x41
11:16:02 #12 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started
11:16:02 #13 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.
11:16:02 #14 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed
11:16:02 #15 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2.4x (3 324 KB/s)
11:16:02 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:16:02 #17 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03A85000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
11:16:02 #18 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
11:16:02 #19 Text 0 File DVDR.cpp, Line 5367
Drive: HP DVD Writer 200j
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:16:02 #20 CDR -1207 File DVDR.cpp, Line 4608
Book Type automatically set to: DVD-ROM
11:16:02 #21 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 23:13,476 (1393476ms) -> OK
11:16:02 #22 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes
11:17:32 #23 SCSI -400 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x060B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x91
Sense Qual: 0xC2
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x91 0xC2
11:17:32 #24 CDR -400 File Writer.cpp, Line 311
Unspecified target error
11:17:32 #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
11:17:32 #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
11:17:33 #27 Phase 127 File dlgbrnst.cpp, Line 1853
Generating DVD high compatibility borders
11:17:33 #28 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
11:17:33 #29 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
11:17:33 #30 Phase 129 File dlgbrnst.cpp, Line 1853
Generating DVD borders completed successfully
11:17:33 #31 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
11:17:33 #32 Text 0 File DVDR.cpp, Line 5367
Drive: HP DVD Writer 200j
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:17:33 #33 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
11:17:33 #34 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2.4x (3 324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option
Flux RSS