[MrSharingan]

Bonjour, depuis peu, j'ai des problèmes pour graver des dvd-r verbatim

16x ( made in Taïwan ) avec comme MID code : mcc03rg20 .

Mes 2 graveur :

- pioneer dvr-109 ( firmware v1.58 ) IDE

- pioneer dvr-215d ( firmware v1.22 ) SERIAL ATA







J'ai essayer ces dvd-r vierge sur 2 autres ordinateur est la toujours

pareil, j'ai un message d'erreur lors de la gravure au tout début. ( adresse de bloc invalide )

Je met le lien ou j'ai poster mon problème de gravure.

http://www.entraide-nero.org/forum/viewtopic.php?f=11&t=383&p=2191#p2191

Tout ça pour dire que je doute de la qualité de ces dvd verbatim . ( et bigo du forum entreaide-nero aussi )

J'ai un peu lu quelque sujet de ce forum et je vois que quelque personnes

s' y connaissent bien.

Donc je viens vous demander votre avis et peut etre quequ'un a deja eu le problème avec les meme dvd ? ^^ .

Merci d'avance

[Scaramanga]

As tu un fichier LOG de gravure ?

[Scaramanga]

As tu un fichier LOG de gravure ?

[MrSharingan]

Mon frere viens de graver ( graveur dvd pioneer dvr-111d firmare V1.29 )

impeccable 2 dvd d'une autre boite de 50, puisque la j'étais sur la fin de la

boite .

Mais moi j'ai essayer 3 gravure avec ces dvd + 2 autres avec un dvd-r

16x Tayo Yuden tg02( 1 a fonctionner et l'autre non ), eh ben toujours

pareil : " adresse de bloc invalide ".

Il faut mettre le graveur en sata master ou esclave ? ( je n'ai pas de cavalier derrière )

Je ne sais plus quoi pensé O_o

[MrSharingan]

[Scaramanga]

Mets à jour le firmware de ton graveur.

[Scaramanga]

Mets à jour le firmware de ton graveur.

[MrSharingan]

[Scaramanga]

Il me semble que la dernière version de firmware soit la 1.58 ?

[Scaramanga]

Il me semble que la dernière version de firmware soit la 1.58 ?

[MrSharingan]

Voila le rapport néro avec les firmware des 2 graveurs mis a jour :

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.13.0
Internal Version: 8, 3, 13, 0

Recorder: <PIONEER DVD-RW DVR-215D>Version: 1.22 - HA 1 TA 1 - 8.3.13.0
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2000kB
Bus Type : default
CD-ROM: <PIONEER DVD-RW DVR-109 >Version: 1.58 - HA 1 TA 0 - 8.3.13.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6V250F0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-215D atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6B200M0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : WDC WD5001AALS-00L3B2 atapi Port 2 ID 1 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 I: CdRom0
PIONEER DVD-RW DVR-215D F: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095532kB)
Free physical memory: 1630MB (1669644kB)
Memory in use : 20 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.1.2010
Compilation ISO
19:21:33 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:21:33 #2 Text 0 File Isodoc.cpp, Line 6714
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:21:33 #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

19:21:33 #4 Text 0 File Burncd.cpp, Line 3639
Turn on Disc-At-Once, using DVD media

19:21:33 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

19:21:34 #6 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2220879 (493:31.54, 4337MB)

19:21:34 #7 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

19:21:34 #8 Text 0 File DlgWaitCD.cpp, Line 2946
Recorder: PIONEER DVD-RW DVR-215D, Media type: DVD-R
Disc Manufacturer ID: <MCC 03> <RG20 >
Disc Application Code: 64, Disc Physical Code: 193

19:21:34 #9 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:21:34 #10 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2220880 (2220880) = #2220880/493:31.55
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2220880 blocks [F: PIONEER DVD-RW DVR-215D]
--------------------------------------------------------------

19:21:34 #11 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [F: PIONEER DVD-RW DVR-215D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4548362240, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2220880 | 0 | 0x00
2220880 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

19:21:34 #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

19:21:34 #13 Text 0 File Burncd.cpp, Line 4430
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

19:21:34 #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

19:21:34 #15 Text 0 File Burncd.cpp, Line 4552
Cache writing successful.

19:21:34 #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

19:21:34 #17 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (5 540 Ko/s)

19:21:34 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:21:34 #19 Text 0 File DVDR.cpp, Line 3297
Recording mode: Sequential Recording Mode

19:21:34 #20 Text 0 File DVDR.cpp, Line 3451
Start write address at LBA 0
DVD high compatibility mode: Yes

19:21:34 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x075b6980: Len x648

19:21:34 #22 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00 .@....R.........
03 4D 43 43 20 30 33 00 - 04 52 47 32 30 20 20 00 .MCC.03..RG20...
05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00 .............x..
07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00 ................
09 95 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00 .....x..........
0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00 .....g.....:..2.
0D 00 00 D0 00 00 00 00 - 0E 0A 24 35 2F 29 1A 00 ..........$5/)..
0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00 .P.)............
11 00 00 00 00 00 00 00 - 12 09 2E 37 2F 29 19 00 ...........7/)..
13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00 .P.)............
15 00 00 00 00 00 00 00 - 16 09 3F 44 3D 24 29 00 ..........?D=$).
17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00 .`./............
19 00 00 00 00 00 00 00 - 1A 08 57 46 42 27 24 00 ..........WFB'$.
1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00 .p.+............
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:21:34 #23 Text 0 File DVDR.cpp, Line 3589
Reserved Track size: 2220880 (21E350h, 4337MB) -> return code 0

19:21:34 #24 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

19:22:24 #25 SPTI -1064 File SCSIPassThrough.cpp, Line 214
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
CDB Data: 0x2A 00 00 00 03 80 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 21 02
Buffer x09140740: Len x10000
0x71 B0 1B 31 A7 0D 05 A7 95 F9 77 98 D3 14 2D C3
0xFB 56 72 69 FA D3 94 33 4F E3 82 70 31 0C 60 8F
0x6D F4 31 B6 DF 86 36 DB F0 C6 DB 7E 18 DB 6F C3

19:22:24 #26 CDR -1064 File Writer.cpp, Line 306
Invalid block address
F: PIONEER DVD-RW DVR-215D

19:22:24 #27 Text 0 File DVDR.cpp, Line 3857
EndDAO: Last written address was 895 (37Fh)

19:22:24 #28 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (5 540 Ko/s)

19:22:24 #29 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:22:28 #30 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed

19:22:28 #31 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Scaramanga]

Le code d'errue atapi est trop vague pour localiser l'origine du Pb.

[Scaramanga]

Le code d'errue atapi est trop vague pour localiser l'origine du Pb.

[MrSharingan]

Oui, en réinstallant windows xp, je n'ai utilisé que les dernier drivers

télécharger sur le site gigabit .

Mais par contre je ne comprend pas les 3 lignes de codes :

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00

je ne les retrouver pas sur le lien que tu donne O_o

[Scaramanga]

[Scaramanga]

[MrSharingan]

voila a quoi correspond l'erreur :

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00

**052400 1 2 3 4 5 Invalid field in CDB

These errors are difficult to specify a cause for. Most of the times the problem is in the system.

Traduction mot a mot :

Ces erreurs sont difficiles à spécifier une cause pour. La plupart du temps le problème sont dans le système.

Ma carte mère est la suivante : gigabyte EP31-DS3L rev 2.1
Processeur : core 2 duo e8400
Mémoire : 2 go corsaire xms2 ddr2 800

[Scaramanga]

Tu trouveras les pilotes ici :
http://www.gigabyte.fr/Support/Motherboard/Driver_Model.aspx?ProductID=2959

[Scaramanga]

Tu trouveras les pilotes ici :
http://www.gigabyte.fr/Support/Motherboard/Driver_Model.aspx?ProductID=2959

[MrSharingan]

[MrSharingan]

Bonjour, pour mon probleme d'adresse de bloc invalide, j'ai peut etre

trouvé le problème >> l'antivirus kaspersky antivirus V9.0.0.736

J'en suis pas sur a 100 %, mais ça a l'aire d'être ça, mais ce qui est

bizarre c'est que je n'ai aucun message ( notification ) de l'antivirus.

[cedbytheway]

[MrSharingan]

Oui j'en suis sur a 200 %, je viens de faire un test avec et sans antivirus

( kaspersky antivirus 2010 V9 ), eh ben avec, impossible de graver ( ça

bloque a 1 % adresse de bloc invalide ) et sans pas de problème .

Sois tu quitte l'antivirus ou sois tu fais clique droit ( sur l'icone

kaspersky ) suspension de la protection... et tu clique sur reprendre

manuellement .

[cedbytheway]