Could not perform EndTrack

Messages d'erreur dans vos logiciels ? Besoin d'explications ou de solutions ? C'est ici qu'il vous faut poster.

Could not perform EndTrack

Messagepar neopof » 04 Mar 2004 21:55

voila mon erreur

en fait j'ai 2 graveur un liteon et un yamaha

j'avais foirer le flshage du liteon je lai recup
j'avais un rpob avec nero 6 ( il se fermer) jai remis le 5

jarrive a graver les CD audio !! niquel

par contre les cd de donnees foire assez souvent

genre 3/4

quelque soit le graveur

voila mon log

svp aidez moi !!!



Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=5, 0, 0, 0, size=57344 bytes, created 18/04/2001 19:18:28
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 22:37:36
Nero Version: 5.5.10.54
Recorder: <YAMAHA CRW2200E> Version: 1.0E - HA 1 TA 1 - 5.5.10.54
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <YAMAHA CRW2200E> Version: 1.0E - HA 1 TA 1 - 5.5.10.54
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 0 DMA: ?
DiskPeripheral : IC35L060AVER07-0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : YAMAHA CRW2200E atapi Port 1 ID 1 DMA: Off
DiskPeripheral : ST380023A atapi Port 2 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-40125S atapi Port 2 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 3 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 322MB (330676kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

4.3.2004
CD-ROM (ISO)
18:48:00 #1 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

18:48:00 #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated

18:48:00 #3 Text 0 File Reader.cpp, Line 115
Reader running

18:48:00 #4 Text 0 File Writer.cpp, Line 125
Writer YAMAHA CRW2200E running

18:48:00 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

18:48:00 #6 Text 0 File Burncd.cpp, Line 3769
Turn on Track-At-Once, using CD-R/RW media

18:48:00 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 333069 (333069) = #333069/74:0.69
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

18:48:30 #8 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 336074 (74:42.74)
Last address to be written: 333068 (74:02.68)

18:48:30 #9 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

18:48:30 #10 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: YAMAHA CRW2200E;
CDRW code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

18:48:30 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder YAMAHA CRW2200E for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 682432512

18:48:30 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.

18:48:30 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 333069 (333069) = #333069/74:0.69
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 333067 blocks [YAMAHA CRW2200E ]
--------------------------------------------------------------

18:48:30 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

18:48:30 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

18:48:30 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 10x (1 500 KB/s)

18:48:30 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

18:48:30 #18 Text 0 File Mmc.cpp, Line 19092
Set BUFE: supported -> ON , Optimum Writespeed Control : ON

18:52:02 #19 SCSI -1119 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x020A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x36 0x7E 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0xAC 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x00

18:52:03 #20 MMC -1119 File Writer.cpp, Line 333
Track following error

18:52:18 #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

18:52:23 #22 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

18:52:23 #23 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state

18:52:23 #24 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack

18:52:23 #25 Text 0 File Mmc.cpp, Line 14085
<YAMAHA CRW2200E > start Close Session

18:52:50 #26 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 10x (1 500 KB/s)

18:52:50 #27 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 10/12/2001 16:29:42
File 'WNASPINT.DLL': Ver=V1.14, size=68608 bytes, created 25/06/2002 00:00:00
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 10:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
neopof
Nouveau Membre
 
Messages: 14
Enregistré le: 12 Fév 2004

Messagepar jeff » 04 Mar 2004 22:08

Bonsoir.
Vu que tu a des problèmes avec le flashage du liteon et qu'il a le dma activé et le yamaha non . Montes le yamaha a la place du liteon et refais des essais en remettant néro 6 essayes avec alcohol ( un back-up d'un soft pas trop protegé car le yamaha c'est pas le top ) :wink:
Vista Pro Core2 Duo E6400 Asus P5N-E 2 Go de PC800 Corsair Cub3D 8800 Gts 320 Mo 2 DD Sata Maxtor 160 Go Graveur DVD Plextor PX-760 SA
8)) Pas de support par Mail ou MP 8))

Faire une Recherche :wink:
Avatar de l’utilisateur
jeff
Inconditionnel
Inconditionnel
 
Messages: 2611
Enregistré le: 05 Sep 2002
Localisation: Toulouse

Messagepar neopof » 04 Mar 2004 22:51

ok je vias tester mais mes problemes de flash sont resolu je pense vu qu'il a l'air de marcher

le truc que je capte pas c que en audio ca passe niquel

mais en donnes un cou p le liteon foire
un coup c le yamaha
neopof
Nouveau Membre
 
Messages: 14
Enregistré le: 12 Fév 2004



  • Publicité

Retourner vers Logiciels de gravure

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités

cron