Gravure-News

[fred27]

Bonjour,

j'ai un amd XP2000+, 512 de ram, win xp pro, un graveur asus4824a avec le firmware version 1.35. Mais déjà essayé de graver avec les versions 1.0 et 1.2et échecs

Lorsque je lance soit la gravure, soit la simulation d'un cd de données, de mp3, de ce que l'on veut, j'ai toujours ce message d'erreur " buffer too large et plus loin Could not perform EndTrack. Seule une image fonctionne.

Je vous mets en copie le rapport de néro car je ne vois vraiment pas ce que c'est.

Merci @+

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 11:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 14:25:04
Nero version: 6.0.0.23
Recorder: <ASUS CRW-4824A> Version: 1.35 - HA 2 TA 0 - 6.0.0.23
Adapter driver: <nvidesm> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <NERO IMAGEDRIVE2 >Version: 1.0h - HA 0 TA 0 - 6.0.0.23
Adapter driver: <Imagedrv> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 0 DMA: Off
CdRomPeripheral : ASUS CRW-4824A 1.35 nvidesm Port 2 ID 0 DMA: Off
CdRomPeripheral : ATAPI DVD-ROM 16XMax 1.00 nvidesm Port 2 ID 1 DMA: Off
DiskPeripheral : Promise 1+0 Stripe/RAID01.10 fasttx2k Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
NERO IMAGEDRIVE2 J: CDRom2
ASUS CRW-4824A E: CDRom0
ATAPI DVD-ROM 16XMax H: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523748kB)
Free physical memory: 259MB (266108kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.2.2004
CD-ROM (ISO)
23:25:48 #1 Text 0 File Isodoc.cpp, Line 6013
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

23:25:48 #2 Phase 97 File dlgbrnst.cpp, Line 1803
FlextraLink activated

23:25:48 #3 Text 0 File Reader.cpp, Line 118
Reader running

23:25:48 #4 Text 0 File Writer.cpp, Line 124
Writer ASUS CRW-4824A running

23:25:48 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

23:25:49 #6 Text 0 File Burncd.cpp, Line 3218
Turn on Track-at-once, using CD-R/RW media

23:27:33 #7 Text 0 File DlgWaitCD.cpp, Line 233
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 43073 ( 9:36.23)

23:27:33 #8 Text 0 File DlgWaitCD.cpp, Line 238
Write in overburning mode: FALSE

23:27:33 #9 Text 0 File DlgWaitCD.cpp, Line 1997
Recorder: ASUS CRW-4824A;
CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 16 43 (LI 97:22.67), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

23:27:33 #10 Text 0 File DlgWaitCD.cpp, Line 398
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: CD-ROM. Medium required by compilation: CD-R/RW.)

23:27:33 #11 Text 0 File ThreadedTransferInterface.cpp, Line 773
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 43074 (43074) = #43074/9:34.24
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 43072 blocks [ASUS CRW-4824A ]
--------------------------------------------------------------

23:27:33 #12 Text 0 File ThreadedTransferInterface.cpp, Line 942
Prepare recorder [ASUS CRW-4824A ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 88522752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
43074 | lead-out | 1 | 0x00 | 0x41

23:27:33 #13 Text 0 File ThreadedTransferInterface.cpp, Line 969
Removed 2 run-out blocks from end of track 1.

23:27:34 #14 Phase 24 File dlgbrnst.cpp, Line 1803
Caching of files started

23:27:34 #15 Phase 25 File dlgbrnst.cpp, Line 1803
Caching of files completed

23:27:34 #16 Phase 32 File dlgbrnst.cpp, Line 1803
Simulation started at 32x (4 800 KB/s)

23:27:34 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2146
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23:27:34 #18 Text 0 File Mmc.cpp, Line 19359
Set BUFE: FlextraLink -> ON

23:27:35 #19 SCSI -31 File Cdrdrv.cpp, Line 1427
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03DD0000
Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

23:27:35 #20 CDR -31 File Writer.cpp, Line 301
Buffer too large
ASUS CRW-4824A\H2 T0

23:27:35 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

23:27:36 #22 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

23:27:36 #23 CDR -201 File WriterStatus.cpp, Line 152
Invalid write state
ASUS CRW-4824A\H2 T0

23:27:36 #24 TRANSFER -18 File WriterStatus.cpp, Line 152
Could not perform EndTrack

23:27:36 #25 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 0:00,000 (0ms) -> OK

23:27:36 #26 Phase 34 File dlgbrnst.cpp, Line 1803
Simulation failed at 32x (4 800 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 10:53:02
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0284 built by: WinDDK, size=19712 bytes, created 04/10/2002 09:23:00 (Adapter driver for rec)
File 'Drivers\imagedrv.sys': Ver=2.23.0.0, size=89184 bytes, created 29/03/2003 15:45:18 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[fanjo]

CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 0 DMA: Off
CdRomPeripheral : ASUS CRW-4824A 1.35 nvidesm Port 2 ID 0 DMA: Off
CdRomPeripheral : ATAPI DVD-ROM 16XMax 1.00 nvidesm Port 2 ID 1 DMA: Off
DiskPeripheral : Promise 1+0 Stripe/RAID01.10 fasttx2k Port 3 ID 0 DMA: Off

Le DMA n'est pas avtivé, essaie en l'activant, et dis moi à combien est réglé la mémoire tampon dans néro (fichier---->préférence--->mémoire tampon)

[Stef]

Pour activer les DMA :
http://www.forum.gravure-news.com/viewtopic.php?t=3779

[williams]

File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 10:53:02
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0284 built by: WinDDK, size=19712 bytes, created 04/10/2002 09:23:00 (Adapter driver for rec)

ASPI inutile sous Windows XP et Nero
http://faq-nero.e-wsc.com/faq010.php

nvidesm.sys : chipset IDE NVidia. mettez à jour le pilote et à force le DMA fonctionnera.
http://faq-nero.e-wsc.com/faq007.php (forcer les DMA)

[fred27]

Je vous remercie beaucoup cela fonctionne parfaitement. Je garde ce site dans mes favoris.

Encore merci

[fanjo]

content de t'avoir aider