Graveur qui ralenti pendant la gravure!

Forum de support des graveurs et périphériques Lite-On.

Graveur qui ralenti pendant la gravure!

Messagepar enigma1986 » 26 Mai 2006 16:10

Bonjour!
alors voila je m'explique:
j'ai remarquer depuis quelque jour que mon graveur ralenti en cour de gravure! premierement je m'en rend compte parce que je l'entend ralentir petit a petit(au bruit) et egalement parce que ca prend un peu plus de temps que dabitude! je m'en rend particulierement compte quand je grave en 16x ou le graveur gaz a fond et a un peu plus de la moitié de la graveur on l'entend presque plus!!! je ne comprend pas... pourtant les dvd sont graver nickel... mais ca m'embete quand meme quoi... J'ai changer de nappe ide, passer de master en slave et inversement, reinstaller les driver ide(via) rien n'y fait! je ne me rappele pas de ce que j'aurai pu faire qui serait la cause...

voici ma config :

chip kt4v
graveur lite on shw 160p6s
athlon 2400+
1go ddr
2*80go 1*40 => 3hdd
nero premium 7.0.5.4
voici le log nero:
Code: Tout sélectionner
LSD
QG701
[color=red]xxxxxxxxxxxx Attention au n° de série xxxxxxxxxxxxxxxx[/color]

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS09 - HA 1 TA 0 - 7.0.5.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <SCSIVAX  DVD/CD-ROM      >Version: 2.7a - HA 1 TA 1 - 7.0.5.4
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Maxtor 6Y080L0                   atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 0 ID 1  DMA: On
DiskPeripheral       : Maxtor 6Y080P0                   atapi Port 1 ID 0  DMA: On
DiskPeripheral       : Maxtor 6E040L0                   atapi Port 1 ID 1  DMA: On
CdRomPeripheral      : SCSIVAX DVD/CD-ROM      2.7a   Vax347s Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   K:   CDRom0
SCSIVAX DVD/CD-ROM         L:   CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 1023MB (1048048kB)
Free physical memory: 396MB (405952kB)
Memory in use       : 61
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.5.2006
Compilation ISO
21:13:49   #1 Text 0 File Isodoc.cpp, Line 6414
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : FALSE
   Simulate                : FALSE
   Write                   : TRUE
   Finalize CD             : TRUE
   Multisession            : FALSE
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 1 (Max. of 11 = 8 + 3 char)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : TRUE
   Allow more than 255 characters in path  : TRUE
   Write ISO9660 ;1 file extensions        : TRUE
   
21:13:49   #2 Text 0 File ThreadedTransfer.cpp, Line 531
   ReadBuffer-Pipe got 262144KB of Memory
   
21:13:49   #3 Text 0 File Reader.cpp, Line 124
   Reader running
   
21:13:49   #4 Text 0 File Writer.cpp, Line 113
   Writer K: LITE-ON DVDRW SHW-160P6S running
   
21:13:49   #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
   First writeable address = 0 (0x00000000)
   
21:13:49   #6 Text 0 File Burncd.cpp, Line 3341
   Turn on Disc-At-Once, using DVD media
   
21:13:49   #7 Text 0 File DlgWaitCD.cpp, Line 288
   Last possible write address on media:  2298495 (510:46.45, 4489MB)
   Last address to be written:            2251711 (500:22.61, 4397MB)
   
21:13:49   #8 Text 0 File DlgWaitCD.cpp, Line 300
   Write in overburning mode: NO (enabled: CD)
   
21:13:49   #9 Text 0 File DlgWaitCD.cpp, Line 2699
   Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
    Disc Manufacturer: OPTODI - SCR008
    Disc Application Code: 64, Disc Physical Code: 193
   
21:13:49   #10 Text 0 File DlgWaitCD.cpp, Line 472
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
21:13:49   #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 2251712 (2251712) = #2251712/500:22.62
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2251712 blocks [K: LITE-ON DVDRW SHW-160P6S]
   --------------------------------------------------------------
   
21:13:49   #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
   Prepare recorder [K: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4611506176, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
          0 |  lead-in |   0 |    0x41 | 0x00
          0 |        1 |   0 |    0x41 | 0x00
          0 |        1 |   1 |    0x41 | 0x00
    2251712 | lead-out |   1 |    0x41 | 0x00
   
21:13:49   #13 Text 0 File SCSIPassThrough.cpp, Line 39
   SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
   
21:13:49   #14 Text 0 File SCSIPassThrough.cpp, Line 84
   SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
   
21:13:49   #15 Phase 24 File dlgbrnst.cpp, Line 1730
   Caching of files started
   
21:13:49   #16 Text 0 File Burncd.cpp, Line 4175
   Cache writing successful.
   
21:13:49   #17 Phase 25 File dlgbrnst.cpp, Line 1730
   Caching of files completed
   
21:13:49   #18 Phase 36 File dlgbrnst.cpp, Line 1730
   Burn process started at 8x (11.080 Ko/s)
   
21:13:49   #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
   
21:13:49   #20 Text 0 File DVDR.cpp, Line 2699
   Recording mode: Sequential Recording Mode
   
21:13:49   #21 Text 0 File DVDR.cpp, Line 2855
   Start write address at LBA 0
   DVD high compatibility mode: Yes
   
21:13:49   #22 Text 0 File Cdrdrv.cpp, Line 8663
   ---- DVD Structure: Physical Format Information (00h) ----
   Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
    Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area:      26127F h
    End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
     Start sector number of the current Border-Out: 0 h
     Start sector number of the next Border-In:     0 h
    Media Specific [16..63]:
         00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00    .0...@.....!....
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
   
21:14:37   #23 Text 0 File Cdrdrv.cpp, Line 1210
   21:14:37.359 - K: LITE-ON DVDRW SHW-160P6S : Queue again later
   
21:23:12   #24 Text 0 File WriterStatus.cpp, Line 116
   <K: LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 2251712 (225BC0h), length 0 blocks
   
21:23:12   #25 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
21:23:12   #26 Text 0 File DVDR.cpp, Line 3095
   EndDAO: Last written address was 2251711
   
21:23:32   #27 Phase 37 File dlgbrnst.cpp, Line 1730
   Burn process completed successfully at 8x (11.080 Ko/s)
   

Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/08/2004 2:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
LSD
QG701
1C80-0010-8001-0000-5466-9470-7384

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS09 - HA 1 TA 0 - 7.0.5.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <SCSIVAX  DVD/CD-ROM      >Version: 2.7a - HA 1 TA 1 - 7.0.5.4
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Maxtor 6Y080L0                   atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 0 ID 1  DMA: On
DiskPeripheral       : Maxtor 6Y080P0                   atapi Port 1 ID 0  DMA: On
DiskPeripheral       : Maxtor 6E040L0                   atapi Port 1 ID 1  DMA: On
CdRomPeripheral      : SCSIVAX DVD/CD-ROM      2.7a   Vax347s Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   K:   CDRom0
SCSIVAX DVD/CD-ROM         L:   CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 1023MB (1048048kB)
Free physical memory: 515MB (528320kB)
Memory in use       : 49
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.5.2006
Compilation ISO
21:33:36   #1 Text 0 File Isodoc.cpp, Line 6414
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : FALSE
   Simulate                : TRUE
   Write                   : FALSE
   Finalize CD             : TRUE
   Multisession            : FALSE
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 1 (Max. of 11 = 8 + 3 char)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : TRUE
   Allow more than 255 characters in path  : TRUE
   Write ISO9660 ;1 file extensions        : TRUE
   
21:33:36   #2 Text 0 File ThreadedTransfer.cpp, Line 531
   ReadBuffer-Pipe got 262144KB of Memory
   
21:33:36   #3 Text 0 File Reader.cpp, Line 124
   Reader running
   
21:33:36   #4 Text 0 File Writer.cpp, Line 113
   Writer K: LITE-ON DVDRW SHW-160P6S running
   
21:33:36   #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
   First writeable address = 0 (0x00000000)
   
21:33:36   #6 Text 0 File Burncd.cpp, Line 3341
   Turn on Disc-At-Once, using DVD media
   
21:33:36   #7 Text 0 File DlgWaitCD.cpp, Line 288
   Last possible write address on media:  2298495 (510:46.45, 4489MB)
   Last address to be written:            2251711 (500:22.61, 4397MB)
   
21:33:36   #8 Text 0 File DlgWaitCD.cpp, Line 300
   Write in overburning mode: NO (enabled: CD)
   
21:33:36   #9 Text 0 File DlgWaitCD.cpp, Line 2699
   Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20 
    Disc Application Code: 64, Disc Physical Code: 193
   
21:33:36   #10 Text 0 File DlgWaitCD.cpp, Line 472
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
21:33:36   #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 2251712 (2251712) = #2251712/500:22.62
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2251712 blocks [K: LITE-ON DVDRW SHW-160P6S]
   --------------------------------------------------------------
   
21:33:37   #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
   Prepare recorder [K: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4611506176, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
          0 |  lead-in |   0 |    0x41 | 0x00
          0 |        1 |   0 |    0x41 | 0x00
          0 |        1 |   1 |    0x41 | 0x00
    2251712 | lead-out |   1 |    0x41 | 0x00
   
21:33:37   #13 Text 0 File SCSIPassThrough.cpp, Line 39
   SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
   
21:33:37   #14 Text 0 File SCSIPassThrough.cpp, Line 84
   SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
   
21:33:37   #15 Phase 24 File dlgbrnst.cpp, Line 1730
   Caching of files started
   
21:33:37   #16 Text 0 File Burncd.cpp, Line 4175
   Cache writing successful.
   
21:33:37   #17 Phase 25 File dlgbrnst.cpp, Line 1730
   Caching of files completed
   
21:33:37   #18 Phase 32 File dlgbrnst.cpp, Line 1730
   Simulation started at 16x (22.160 Ko/s)
   
21:33:37   #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
   
21:33:37   #20 Text 0 File DVDR.cpp, Line 2699
   Recording mode: Sequential Recording Mode
   
21:33:37   #21 Text 0 File DVDR.cpp, Line 2855
   Start write address at LBA 0
   DVD high compatibility mode: Yes
   
21:33:37   #22 Text 0 File Cdrdrv.cpp, Line 8663
   ---- DVD Structure: Physical Format Information (00h) ----
   Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
    Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area:      26127F h
    End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
     Start sector number of the current Border-Out: 0 h
     Start sector number of the next Border-In:     0 h
    Media Specific [16..63]:
         00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
   
21:33:45   #23 Text 0 File Cdrdrv.cpp, Line 1210
   21:33:45.812 - K: LITE-ON DVDRW SHW-160P6S : Queue again later
   
21:39:03   #24 Text 0 File WriterStatus.cpp, Line 116
   <K: LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 2251712 (225BC0h), length 0 blocks
   
21:39:03   #25 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
21:39:03   #26 Text 0 File DVDR.cpp, Line 3095
   EndDAO: Last written address was 2251711
   
21:39:21   #27 Phase 33 File dlgbrnst.cpp, Line 1730
   Simulation completed successfully at 16x (22.160 Ko/s)
   

Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/08/2004 2:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
LSD
QG701
1C80-0010-8001-0000-5466-9470-7384

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS09 - HA 1 TA 0 - 7.0.5.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <SCSIVAX  DVD/CD-ROM      >Version: 2.7a - HA 1 TA 1 - 7.0.5.4
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Maxtor 6Y080L0                   atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 0 ID 1  DMA: On
DiskPeripheral       : Maxtor 6Y080P0                   atapi Port 1 ID 0  DMA: On
DiskPeripheral       : Maxtor 6E040L0                   atapi Port 1 ID 1  DMA: On
CdRomPeripheral      : SCSIVAX DVD/CD-ROM      2.7a   Vax347s Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   K:   CDRom0
SCSIVAX DVD/CD-ROM         L:   CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 1023MB (1048048kB)
Free physical memory: 724MB (742008kB)
Memory in use       : 29
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.5.2006
Compilation ISO
0:52:14   #1 Text 0 File Isodoc.cpp, Line 6414
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : TRUE
   Simulate                : FALSE
   Write                   : TRUE
   Finalize CD             : FALSE
   Multisession            : TRUE
   Multisession type:      : Continue multisession
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 1 (Max. of 11 = 8 + 3 char)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : TRUE
   Allow more than 255 characters in path  : TRUE
   Write ISO9660 ;1 file extensions        : TRUE
   
0:52:14   #2 Text 0 File ThreadedTransfer.cpp, Line 531
   ReadBuffer-Pipe got 81920KB of Memory
   
0:52:14   #3 Text 0 File Reader.cpp, Line 124
   Reader running
   
0:52:14   #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
   First writeable address = 0 (0x00000000)
   
0:52:14   #5 Text 0 File Burncd.cpp, Line 3341
   Turn on Disc-At-Once, using DVD media
   
0:52:16   #6 Text 0 File DlgWaitCD.cpp, Line 288
   Last possible write address on media:  2297887 (510:38.37, 4488MB)
   Last address to be written:            1190863 (264:38.13, 2325MB)
   
0:52:16   #7 Text 0 File DlgWaitCD.cpp, Line 300
   Write in overburning mode: NO (enabled: CD)
   
0:52:16   #8 Text 0 File DlgWaitCD.cpp, Line 2699
   Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
    Disc Manufacturer: PRINCO -
    Disc Application Code: 64, Disc Physical Code: 193
   
0:52:16   #9 Text 0 File DlgWaitCD.cpp, Line 472
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
0:52:16   #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 598304 (598304) = #598304/132:57.29
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598304 blocks [K: LITE-ON DVDRW SHW-160P6S]
   --------------------------------------------------------------
   
0:52:16   #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
   Prepare recorder [K: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 2 to 2:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    1225326592, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
     592560 |  lead-in |   0 |    0x41 | 0x00
     592560 |        2 |   0 |    0x41 | 0x00
     592560 |        2 |   1 |    0x41 | 0x00
    1190864 | lead-out |   1 |    0x41 | 0x00
   
0:52:16   #12 Text 0 File SCSIPassThrough.cpp, Line 39
   SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
   
0:52:16   #13 Text 0 File SCSIPassThrough.cpp, Line 84
   SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
   
0:52:16   #14 Phase 24 File dlgbrnst.cpp, Line 1730
   Caching of files started
   
0:52:16   #15 Text 0 File Burncd.cpp, Line 4175
   Cache writing successful.
   
0:52:16   #16 Phase 25 File dlgbrnst.cpp, Line 1730
   Caching of files completed
   
0:52:16   #17 Phase 28 File dlgbrnst.cpp, Line 1730
   Speed measurement started
   
0:52:16   #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #592560
   
0:52:19   #19 TRANSFER -25 File Reader.cpp, Line 364
   Error reading data
   
0:52:19   #20 Text 0 File Reader.cpp, Line 367
   Exception value: -1
   
0:52:19   #21 Text 0 File ThreadedTransfer.cpp, Line 234
   conversion failed, stopping writers
   
0:52:19   #22 Phase 30 File dlgbrnst.cpp, Line 1730
   Speed measurement failed
   

Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/08/2004 2:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
LSD
QG701
1C80-0010-8001-0000-5466-9470-7384

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS09 - HA 1 TA 0 - 7.0.5.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <SCSIVAX  DVD/CD-ROM      >Version: 2.7a - HA 1 TA 1 - 7.0.5.4
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Maxtor 6Y080L0                   atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 0 ID 1  DMA: On
DiskPeripheral       : Maxtor 6Y080P0                   atapi Port 1 ID 0  DMA: On
DiskPeripheral       : Maxtor 6E040L0                   atapi Port 1 ID 1  DMA: On
CdRomPeripheral      : SCSIVAX DVD/CD-ROM      2.7a   Vax347s Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   K:   CDRom0
SCSIVAX DVD/CD-ROM         L:   CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 1023MB (1048048kB)
Free physical memory: 656MB (671996kB)
Memory in use       : 35
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.5.2006
Compilation ISO
0:53:05   #1 Text 0 File Isodoc.cpp, Line 6414
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : TRUE
   Simulate                : FALSE
   Write                   : TRUE
   Finalize CD             : FALSE
   Multisession            : TRUE
   Multisession type:      : Continue multisession
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 1 (Max. of 11 = 8 + 3 char)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : TRUE
   Allow more than 255 characters in path  : TRUE
   Write ISO9660 ;1 file extensions        : TRUE
   
0:53:05   #2 Text 0 File ThreadedTransfer.cpp, Line 531
   ReadBuffer-Pipe got 81920KB of Memory
   
0:53:05   #3 Text 0 File Reader.cpp, Line 124
   Reader running
   
0:53:05   #4 Text 0 File Writer.cpp, Line 113
   Writer K: LITE-ON DVDRW SHW-160P6S running
   
0:53:05   #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
   First writeable address = 0 (0x00000000)
   
0:53:05   #6 Text 0 File Burncd.cpp, Line 3341
   Turn on Disc-At-Once, using DVD media
   
0:53:26   #7 Text 0 File DlgWaitCD.cpp, Line 288
   Last possible write address on media:  2297887 (510:38.37, 4488MB)
   Last address to be written:            1190863 (264:38.13, 2325MB)
   
0:53:26   #8 Text 0 File DlgWaitCD.cpp, Line 300
   Write in overburning mode: NO (enabled: CD)
   
0:53:26   #9 Text 0 File DlgWaitCD.cpp, Line 2699
   Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
    Disc Manufacturer: PRINCO -
    Disc Application Code: 64, Disc Physical Code: 193
   
0:53:26   #10 Text 0 File DlgWaitCD.cpp, Line 472
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
0:53:26   #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 598304 (598304) = #598304/132:57.29
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598304 blocks [K: LITE-ON DVDRW SHW-160P6S]
   --------------------------------------------------------------
   
0:53:26   #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
   Prepare recorder [K: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 2 to 2:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    1225326592, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
     592560 |  lead-in |   0 |    0x41 | 0x00
     592560 |        2 |   0 |    0x41 | 0x00
     592560 |        2 |   1 |    0x41 | 0x00
    1190864 | lead-out |   1 |    0x41 | 0x00
   
0:53:26   #13 Text 0 File SCSIPassThrough.cpp, Line 39
   SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
   
0:53:26   #14 Text 0 File SCSIPassThrough.cpp, Line 84
   SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
   
0:53:26   #15 Phase 24 File dlgbrnst.cpp, Line 1730
   Caching of files started
   
0:53:26   #16 Text 0 File Burncd.cpp, Line 4175
   Cache writing successful.
   
0:53:26   #17 Phase 25 File dlgbrnst.cpp, Line 1730
   Caching of files completed
   
0:53:26   #18 Phase 28 File dlgbrnst.cpp, Line 1730
   Speed measurement started
   
0:53:26   #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #592560
   
0:53:50   #20 Text 0 File WriterStatus.cpp, Line 116
   <K: LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 1190864 (122BD0h), length 0 blocks
   
0:53:50   #21 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
0:53:50   #22 Phase 29 File dlgbrnst.cpp, Line 1679
   Speed measurement completed: 38,5x (53.220 Ko/s)
   
0:53:50   #23 Phase 36 File dlgbrnst.cpp, Line 1730
   Burn process started at 4x (5.540 Ko/s)
   
0:53:50   #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #592560
   
0:53:50   #25 Text 0 File DVDR.cpp, Line 2699
   Recording mode: Sequential Recording Mode for Multisession
   
0:53:50   #26 Text 0 File DVDR.cpp, Line 2855
   Start write address at LBA 592560
   DVD high compatibility mode: Yes
   
0:53:50   #27 Text 0 File Cdrdrv.cpp, Line 8663
   ---- DVD Structure: Physical Format Information (00h) ----
   Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
    Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area:      B769F h
    End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
     Start sector number of the current Border-Out: B76B0 h
     Start sector number of the next Border-In:     C0A50 h
    Media Specific [16..63]:
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
         00 0B 76 B0 00 0C 0A 50 - 00 00 00 00 00 00 00 00    ..v°...P........
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
   
0:58:13   #28 Text 0 File WriterStatus.cpp, Line 116
   <K: LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 1190864 (122BD0h), length 0 blocks
   
0:58:13   #29 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
0:58:13   #30 Text 0 File DVDR.cpp, Line 3095
   EndDAO: Last written address was 1190863
   
0:58:17   #31 Phase 133 File dlgbrnst.cpp, Line 1730
   Writing short lead-out
   
0:58:25   #32 Phase 37 File dlgbrnst.cpp, Line 1730
   Burn process completed successfully at 4x (5.540 Ko/s)
   

Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/08/2004 2:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
LSD
QG701
1C80-0010-8001-0000-5466-9470-7384

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS09 - HA 1 TA 0 - 7.0.5.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <SCSIVAX  DVD/CD-ROM      >Version: 2.7a - HA 1 TA 1 - 7.0.5.4
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Maxtor 6Y080L0                   atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 0 ID 1  DMA: On
DiskPeripheral       : Maxtor 6Y080P0                   atapi Port 1 ID 0  DMA: On
DiskPeripheral       : Maxtor 6E040L0                   atapi Port 1 ID 1  DMA: On
CdRomPeripheral      : SCSIVAX DVD/CD-ROM      2.7a   Vax347s Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   K:   CDRom0
SCSIVAX DVD/CD-ROM         L:   CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 1023MB (1048048kB)
Free physical memory: 279MB (286248kB)
Memory in use       : 72
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.5.2006
Compilation ISO
14:23:51   #1 Text 0 File Isodoc.cpp, Line 6414
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : TRUE
   Simulate                : FALSE
   Write                   : TRUE
   Finalize CD             : TRUE
   Multisession            : FALSE
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 1 (Max. of 11 = 8 + 3 char)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : TRUE
   Allow more than 255 characters in path  : TRUE
   Write ISO9660 ;1 file extensions        : TRUE
   
14:23:51   #2 Text 0 File ThreadedTransfer.cpp, Line 531
   ReadBuffer-Pipe got 262144KB of Memory
   
14:23:51   #3 Text 0 File Reader.cpp, Line 124
   Reader running
   
14:23:51   #4 Text 0 File Writer.cpp, Line 113
   Writer K: LITE-ON DVDRW SHW-160P6S running
   
14:23:51   #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
   First writeable address = 0 (0x00000000)
   
14:23:51   #6 Text 0 File Burncd.cpp, Line 3341
   Turn on Disc-At-Once, using DVD media
   
14:23:51   #7 Text 0 File DlgWaitCD.cpp, Line 288
   Last possible write address on media:  2298495 (510:46.45, 4489MB)
   Last address to be written:            2290239 (508:56.39, 4473MB)
   
14:23:51   #8 Text 0 File DlgWaitCD.cpp, Line 300
   Write in overburning mode: NO (enabled: CD)
   
14:23:51   #9 Text 0 File DlgWaitCD.cpp, Line 2699
   Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
    Disc Manufacturer: OPTODI - SCR008
    Disc Application Code: 64, Disc Physical Code: 193
   
14:23:51   #10 Text 0 File DlgWaitCD.cpp, Line 472
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
14:23:51   #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 2290240 (2290240) = #2290240/508:56.40
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2290240 blocks [K: LITE-ON DVDRW SHW-160P6S]
   --------------------------------------------------------------
   
14:23:51   #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
   Prepare recorder [K: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4690411520, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
          0 |  lead-in |   0 |    0x41 | 0x00
          0 |        1 |   0 |    0x41 | 0x00
          0 |        1 |   1 |    0x41 | 0x00
    2290240 | lead-out |   1 |    0x41 | 0x00
   
14:23:51   #13 Text 0 File SCSIPassThrough.cpp, Line 39
   SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
   
14:23:51   #14 Text 0 File SCSIPassThrough.cpp, Line 84
   SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
   
14:23:51   #15 Phase 24 File dlgbrnst.cpp, Line 1730
   Caching of files started
   
14:23:51   #16 Text 0 File Burncd.cpp, Line 4175
   Cache writing successful.
   
14:23:51   #17 Phase 25 File dlgbrnst.cpp, Line 1730
   Caching of files completed
   
14:23:51   #18 Phase 28 File dlgbrnst.cpp, Line 1730
   Speed measurement started
   
14:23:52   #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
   
14:24:21   #20 Phase 40 File dlgbrnst.cpp, Line 1417
   Aborted by user
   
14:24:21   #21 Phase 31 File dlgbrnst.cpp, Line 1730
   Speed measurement aborted
   

Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/08/2004 2:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
LSD
QG701
1C80-0010-8001-0000-5466-9470-7384

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4

Recorder:             <LITE-ON DVDRW SHW-160P6S>Version: PS09 - HA 1 TA 0 - 7.0.5.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <SCSIVAX  DVD/CD-ROM      >Version: 2.7a - HA 1 TA 1 - 7.0.5.4
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Maxtor 6Y080L0                   atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : LITE-ON DVDRW SHW-160P6S         atapi Port 0 ID 1  DMA: On
DiskPeripheral       : Maxtor 6Y080P0                   atapi Port 1 ID 0  DMA: On
DiskPeripheral       : Maxtor 6E040L0                   atapi Port 1 ID 1  DMA: On
CdRomPeripheral      : SCSIVAX DVD/CD-ROM      2.7a   Vax347s Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S   K:   CDRom0
SCSIVAX DVD/CD-ROM         L:   CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 1023MB (1048048kB)
Free physical memory: 264MB (270552kB)
Memory in use       : 74
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.5.2006
Compilation ISO
14:24:51   #1 Text 0 File Isodoc.cpp, Line 6414
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : FALSE
   Simulate                : FALSE
   Write                   : TRUE
   Finalize CD             : TRUE
   Multisession            : FALSE
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 1 (Max. of 11 = 8 + 3 char)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : TRUE
   Allow more than 255 characters in path  : TRUE
   Write ISO9660 ;1 file extensions        : TRUE
   
14:24:51   #2 Text 0 File ThreadedTransfer.cpp, Line 531
   ReadBuffer-Pipe got 262144KB of Memory
   
14:24:51   #3 Text 0 File Reader.cpp, Line 124
   Reader running
   
14:24:51   #4 Text 0 File Writer.cpp, Line 113
   Writer K: LITE-ON DVDRW SHW-160P6S running
   
14:24:51   #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
   First writeable address = 0 (0x00000000)
   
14:24:51   #6 Text 0 File Burncd.cpp, Line 3341
   Turn on Disc-At-Once, using DVD media
   
14:24:52   #7 Text 0 File DlgWaitCD.cpp, Line 288
   Last possible write address on media:  2298495 (510:46.45, 4489MB)
   Last address to be written:            2290239 (508:56.39, 4473MB)
   
14:24:52   #8 Text 0 File DlgWaitCD.cpp, Line 300
   Write in overburning mode: NO (enabled: CD)
   
14:24:52   #9 Text 0 File DlgWaitCD.cpp, Line 2699
   Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
    Disc Manufacturer: OPTODI - SCR008
    Disc Application Code: 64, Disc Physical Code: 193
   
14:24:52   #10 Text 0 File DlgWaitCD.cpp, Line 472
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
14:24:52   #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 2290240 (2290240) = #2290240/508:56.40
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2290240 blocks [K: LITE-ON DVDRW SHW-160P6S]
   --------------------------------------------------------------
   
14:24:52   #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
   Prepare recorder [K: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4690411520, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
          0 |  lead-in |   0 |    0x41 | 0x00
          0 |        1 |   0 |    0x41 | 0x00
          0 |        1 |   1 |    0x41 | 0x00
    2290240 | lead-out |   1 |    0x41 | 0x00
   
14:24:52   #13 Text 0 File SCSIPassThrough.cpp, Line 39
   SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
   
14:24:52   #14 Text 0 File SCSIPassThrough.cpp, Line 84
   SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
   
14:24:52   #15 Phase 24 File dlgbrnst.cpp, Line 1730
   Caching of files started
   
14:24:52   #16 Text 0 File Burncd.cpp, Line 4175
   Cache writing successful.
   
14:24:52   #17 Phase 25 File dlgbrnst.cpp, Line 1730
   Caching of files completed
   
14:24:52   #18 Phase 36 File dlgbrnst.cpp, Line 1730
   Burn process started at 8x (11.080 Ko/s)
   
14:24:52   #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
   
14:24:52   #20 Text 0 File DVDR.cpp, Line 2699
   Recording mode: Sequential Recording Mode
   
14:24:52   #21 Text 0 File DVDR.cpp, Line 2855
   Start write address at LBA 0
   DVD high compatibility mode: Yes
   
14:24:52   #22 Text 0 File Cdrdrv.cpp, Line 8663
   ---- DVD Structure: Physical Format Information (00h) ----
   Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
    Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area:      26127F h
    End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
     Start sector number of the current Border-Out: 0 h
     Start sector number of the next Border-In:     0 h
    Media Specific [16..63]:
         00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00    .0...@.....!....
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
   
14:25:36   #23 Text 0 File Cdrdrv.cpp, Line 1210
   14:25:36.859 - K: LITE-ON DVDRW SHW-160P6S : Queue again later
   
14:34:10   #24 Text 0 File WriterStatus.cpp, Line 116
   <K: LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 2290240 (22F240h), length 0 blocks
   
14:34:10   #25 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
14:34:10   #26 Text 0 File DVDR.cpp, Line 3095
   EndDAO: Last written address was 2290239
   
14:34:30   #27 Phase 37 File dlgbrnst.cpp, Line 1730
   Burn process completed successfully at 8x (11.080 Ko/s)
   

Existing drivers:
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/08/2004 2:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======

Merci bcp!!
bonne journée
enigma1986
Nouveau Membre
 
Messages: 10
Enregistré le: 26 Mai 2006

Messagepar Stef » 26 Mai 2006 16:48

Bonjour et bienvenue sur GN :wink:

Attention à ton numéro de série quand tu postes ton fichier log...

Pour ton problème :

DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y080P0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6E040L0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off


Ton graveur est branché directement derrière ton disque dur....pas du tout top comme branchement....
Branche tes disques durs ensemble et séparement de tes lecteurs optiques...

Tutoriel sur les branchements des péripheriques IDE :
http://www.gravure-news.com/html/tuto/18/page01.php

Tutoriel sur l'installation d'un graveur IDE :
http://www.gravure-news.com/html/tuto/07/page01.php

:wink:
@+ Stef :coucou:

Image
Pas encore membre de gravure-news ? Viens nous rejoindre. Image S'enregistrer :wink:
Avatar de l’utilisateur
Stef
Tutoriel GN-Killer
Tutoriel GN-Killer
 
Messages: 7265
Enregistré le: 21 Sep 2002

Messagepar enigma1986 » 26 Mai 2006 18:58

merci davoir repondu si vite 8)
et bien si je pouvais je le ferai mais j'ai 3 disque dur... et il est connecter sur lecanal secondaire donc ca devrait fonctionner non? et puis tout allais tres bien avant( et en plus il etait sur le primaire lol).
voila
enigma1986
Nouveau Membre
 
Messages: 10
Enregistré le: 26 Mai 2006

Messagepar Stef » 26 Mai 2006 19:10

Essaie dans un premier temps de deconnecter tes deux disques durs et de brancher ton graveur sur l'IDE 2 seul pour voir comment il se comporte.
Pour tes disques dur tu peux brancher une carte PCI supplémentaire, ou mettre deux disques durs sur IDE 1 et le troisième dans un boitier externe.
Mais teste d'abord le graveur seul en ide2... :wink:
@+ Stef :coucou:

Image
Pas encore membre de gravure-news ? Viens nous rejoindre. Image S'enregistrer :wink:
Avatar de l’utilisateur
Stef
Tutoriel GN-Killer
Tutoriel GN-Killer
 
Messages: 7265
Enregistré le: 21 Sep 2002

Messagepar enigma1986 » 26 Mai 2006 19:15

je vais essayer je te tiens au courant...
mais ce qui est bizard, c est que en emulation, ca roule sans probleme....
enigma1986
Nouveau Membre
 
Messages: 10
Enregistré le: 26 Mai 2006



  • Publicité

Retourner vers Graveurs Lite-On

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 1 invité

cron