Gravure-News

[chouchou1731]

Bonjour a tous!
Je viens d'acheter le samsung super-writemaster et des dvd fujifilm16x dvd-R 4.7Gb.
Logiciel nero express 6 fourni.
Installation reussi, je grave en disque de donnee mes films .avi. an mode multisession.Essaye en 16x et 8x et voici mes 2 mess d'erreurs de mes 2 echecs de gravures. Au debut ca marche et a chaque fois probleme a la finalisation.

1ere gravure:


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19d
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB03 - HA 2 TA 0 - 6.6.0.19
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-R2312>Version: 1A06 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHR2030AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R2312 D: CDRom0
TSSTcorp CD/DVDW SH-S182M E: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 38797312 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 239MB (245228kB)
Free physical memory: 42MB (43376kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.3.2007
Compilation ISO
19:11:45 #1 Text 0 File Isodoc.cpp, Line 6368
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:11:46 #2 Text 0 File Reader.cpp, Line 127
Reader running

19:11:46 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-S182M running

19:11:46 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

19:11:46 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

19:11:47 #6 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1431391 (318:05.16, 2795MB)

19:11:47 #7 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)

19:11:47 #8 Text 0 File DlgWaitCD.cpp, Line 2494
Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD-R
Disc Manufacturer: MBI 03 - RG40
Disc Application Code: 64, Disc Physical Code: 193

19:11:47 #9 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:11:47 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1431392 (1431392) = #1431392/318:5.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1431392 blocks [TSSTcorp CD/DVDW SH-S182M]
--------------------------------------------------------------

19:12:19 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2931490816, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1431392 | lead-out | 1 | 0x41 | 0x00

19:12:19 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

19:12:19 #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

19:12:19 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

19:12:19 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (22 160 Ko/s)

19:12:22 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:12:22 #17 Text 0 File DVDR.cpp, Line 2619
Recording mode: Sequential Recording Mode for Multisession

19:12:22 #18 Text 0 File Mmc.cpp, Line 21864
Set BUFE: Super Link -> ON

19:12:22 #19 Text 0 File DVDR.cpp, Line 2774
Start write address at LBA 0
DVD high compatibility mode: Yes

19:12:22 #20 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 00 00 00 00 00 .`...0@P........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:12:46 #21 Text 0 File Cdrdrv.cpp, Line 1289
19:12:46.677 - TSSTcorp CD/DVDW SH-S182M\H2 T0 : Queue again later

20:50:43 #22 SCSI -1135 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x076B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x14 0x0D 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

20:50:43 #23 CDR -1135 File Writer.cpp, Line 311
Write error

20:50:43 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:50:45 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

20:50:45 #26 Text 0 File DVDR.cpp, Line 3017
EndDAO: Last written address was 1314143

20:50:46 #27 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

20:57:37 #28 SCSI -1176 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x00

20:58:32 #29 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
TSSTcorp CD/DVDW SH-S182M\H2 T0

20:58:32 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

20:58:33 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (22 160 Ko/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 23:07:32
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 17/08/2001 22:51:56 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

et Gravure n°2



1A20-820N-0132-2540-5706-0121*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19d
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB03 - HA 2 TA 0 - 6.6.0.19
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-R2312>Version: 1A06 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHR2030AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R2312 D: CDRom0
TSSTcorp CD/DVDW SH-S182M E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 38797312 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 239MB (245228kB)
Free physical memory: 79MB (81048kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.3.2007
Compilation ISO
10:16:17 #1 Text 0 File Isodoc.cpp, Line 6368
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:16:17 #2 Text 0 File Reader.cpp, Line 127
Reader running

10:16:17 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-S182M running

10:16:17 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:16:17 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:16:18 #6 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 355711 ( 79:02.61, 694MB)

10:16:18 #7 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)

10:16:18 #8 Text 0 File DlgWaitCD.cpp, Line 2494
Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD-R
Disc Manufacturer: MBI 03 - RG40
Disc Application Code: 64, Disc Physical Code: 193

10:16:18 #9 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:16:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 355712 (355712) = #355712/79:2.62
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 355712 blocks [TSSTcorp CD/DVDW SH-S182M]
--------------------------------------------------------------

10:16:33 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 728498176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
355712 | lead-out | 1 | 0x41 | 0x00

10:16:33 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:16:33 #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

10:16:33 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:16:33 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11 080 Ko/s)

10:16:33 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:16:33 #17 Text 0 File DVDR.cpp, Line 2619
Recording mode: Sequential Recording Mode for Multisession

10:16:33 #18 Text 0 File Mmc.cpp, Line 21864
Set BUFE: Super Link -> ON

10:16:34 #19 Text 0 File DVDR.cpp, Line 2774
Start write address at LBA 0
DVD high compatibility mode: Yes

10:16:34 #20 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 00 00 00 00 00 .`...0@P........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:17:17 #21 Text 0 File Cdrdrv.cpp, Line 1289
10:17:17.062 - TSSTcorp CD/DVDW SH-S182M\H2 T0 : Queue again later

10:36:27 #22 SCSI -1135 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07340000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0x5D 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

10:36:27 #23 CDR -1135 File Writer.cpp, Line 311
Write error

10:36:27 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:36:27 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:36:28 #26 Text 0 File DVDR.cpp, Line 3017
EndDAO: Last written address was 220479

10:36:28 #27 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

10:39:19 #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11 080 Ko/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 23:07:32
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 17/08/2001 22:51:56 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Voila, si qqun peut m'aider a graver mes DVD et pouvoir regarder mes films ds mon salon se serait super sympa!!!
D'avance Merci pour les infos!

[Scaramanga]

Salut et bienvenue sur le forum de Gravure-News,

-Commence par mettre à jour Nero , tu as la version 6.6.0.19 , la dernière dispo est la 6.6.1.4...
http://www.gravure-news.com/download/6.php


-Réduit sensiblement ta vitesse de gravure.

Code: Tout sélectionner

 Burn process started at 16x (22 160 Ko/s)

Mets à jour le firmware de ton graveur.
http://www.toshiba-europe.com/storage/p ... pe=COMBOSL
http://www.gravure-news.com/html/arts/06/page01.php

Quel est le MID code des médias ?
http://www.gravure-news.com/html/arts/16/page01.php

PS : tu avais laissé le numéro de série de Nero dans le fichier Log...

[chouchou1731]

Merci pour ces infos, cela m'apprends pas mal sur les graveurs dvd,dvd...super interessant!!
Je suis en pleine mise a jour comme tu me l'as recommande.
Le MID MB1 03RG40.
Je te tiens au courant si j'arrive

[Scaramanga]

Le MID MBI 03RG40 ( MBI = Moser Baer India ).
C'est média sont réputés correct.
Tiens nous au jus !

[chouchou1731]

Voila les news!
j'ai telecharger tt ce que tas dit, j'arrivais pas pour le limware,du coup j'ai telecharge limware liveupdate....et j'ai apres pu enregistrer mon premier DVD!!
Mais et oui on peut jamais reussir du premier coup
j'ai enregistre film par film sur le meme DVD.1er gravage,verification sur media player s'il arrivait a le lire,gravage du 2eme film,verif a nveau...4films comme ca.
Puis essai sur le lecteur dvd de la TV. Et la j'ai pas la fenetre de choix des films,il va direct sur le premier film et apres impossible de sauter de film en film,c'est une lecture continu.Je suppose que cela doit se regler et surtout une saccade de l'image ts les 20s 30s a peu pres.Est un pb de rapidite de gravage???je l'ai fait a 12x.
Je verrai ca demain si g le temps et si t'as une idee lumineuse n'hesites pas et merci encore!!