Gravure-News

[friskies]

Bonjour à tous,

J'ai acquis récemment un pentium intel celeron 2,66 ghz avec 512 de ram et un graveur cd/dvd -/+ RW...

je n'ai aucun problème pour graver les cd, mais dès que j'essaie de graver un dvd .... nero plante... au bout de même pas une minute.. avec comme message : "erreur d'écriture"..

J'ai désactivé la gravure automatique de xp, viré Roxio... mais rien n'y fait...

Chaque fois que j'ai tenté une simulation elle a fonctionné.... mais après la simulation... me graveur ne semble pas reconnaitre le cd vierge

je relance la machine et quand je tente de graver cela plante systématiquement... j'en suis à mon cinquième dvd vierge bousillé....

j'utilise des dvd vierge "MIRROR"... mon graveur est un philips PBDV164OPVB2.2... voilà je suis un peu désespéré... si vous pouvez m'aider je vous remercie d'avance..

ps: ci joint le log de mon dernier échec..... je n'ai qu'un lecteur/graveur dvd sur ma tour les autres sont des lecteurs virtuels dont j'ai désactivé le cache avant la gravure ... mais même avec la simulation fonctionnait:





Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 06/05/2002 11:01:14
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero version: 6.6.0.3
Recorder: <PHILIPS PBDV1640P> Version: B2.2 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PHILIPS PBDV1640P >Version: B2.2 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS PBDV1640P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 0 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 1 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 10 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 11 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 12 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 13 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 14 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 15 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 16 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 2 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 3 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 4 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 5 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 6 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 7 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 8 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 2 ID 9 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
PHILIPS PBDV1640P D: CDRom0
FvF-Inc CDDVD-2003-200x J: CDRom1
FvF-Inc CDDVD-2003-200x K: CDRom2
FvF-Inc CDDVD-2003-200x L: CDRom3
FvF-Inc CDDVD-2003-200x M: CDRom4
FvF-Inc CDDVD-2003-200x N: CDRom5
FvF-Inc CDDVD-2003-200x O: CDRom6
FvF-Inc CDDVD-2003-200x P: CDRom7
FvF-Inc CDDVD-2003-200x Q: CDRom8
FvF-Inc CDDVD-2003-200x R: CDRom9
FvF-Inc CDDVD-2003-200x S: CDRom10
FvF-Inc CDDVD-2003-200x T: CDRom11
FvF-Inc CDDVD-2003-200x U: CDRom12
FvF-Inc CDDVD-2003-200x V: CDRom13
FvF-Inc CDDVD-2003-200x W: CDRom14
FvF-Inc CDDVD-2003-200x X: CDRom15
FvF-Inc CDDVD-2003-200x Y: CDRom16
AXV CD/DVD-ROM I: CDRom18
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 152MB (156520kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.12.2004
ISO compilation
14:59:52 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:59:52 #2 Text 0 File Reader.cpp, Line 127
Reader running

14:59:52 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS PBDV1640P running

14:59:52 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

14:59:53 #5 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media

14:59:53 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2235593 (496:47.68, 4366MB)

14:59:53 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

14:59:53 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PHILIPS PBDV1640P, Media type: DVD-R
Disc Manufacturer: INFOSM - ART01
Disc Application Code: 64, Disc Physical Code: 193

14:59:53 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:59:53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2235744 (2235744) = #2235744/496:49.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2235744 blocks [PHILIPS PBDV1640P]
--------------------------------------------------------------

14:59:54 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [PHILIPS PBDV1640P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 283836416, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2235744 | lead-out | 1 | 0x41 | 0x00

14:59:54 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

14:59:54 #13 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

14:59:54 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

14:59:54 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 KB/s)

14:59:54 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:59:54 #17 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode for Multisession

14:59:54 #18 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON

14:59:54 #19 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes

14:59:54 #20 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:01:37 #21 SCSI -1135 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04140000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x3B 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

15:01:37 #22 CDR -1135 File Writer.cpp, Line 311
Write error

15:01:37 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:01:37 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

15:01:37 #25 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 15135

15:01:37 #26 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

15:04:39 #27 SCSI -1135 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

15:07:16 #28 SCSI -1135 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

15:07:16 #29 CDR -1135 File WriterStatus.cpp, Line 167
Write error

15:07:16 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

15:07:16 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5 540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 06/05/2002 11:01:08
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 04/12/2004 00:39:45 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13/09/2004 11:54:06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13/09/2004 11:54:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13/09/2004 11:58:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 05/08/2004 13:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)