Gravure-News

[Smacks]

Bonjour, voila mon problème je n'arrive pas à graver des DVD+R DL avec mon graveur.

Graveur: GSA-4163B de chez LG
Logiciel: Nero ou CloneDVD 2
Firmware: A106
DMA: Activé

J'ai bien vérifié qu'il était compatible DVD+R DL et j'avais deja graver un DVD+R DL y a quelque année.


Que dois je faire merci

DVD+R DL Memorex


----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R-DL:RITEK-S04-066]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R DL] - [DVD+R DL]
Manufacturer Name : [Ritek Corp.]
Manufacturer ID : [RITEK]
Media Type ID : [S04]
Product Revision : [066]
Blank Disc Capacity : [Not Supported By Method 2]
Recording Speeds : [2.4x , 3.3x-8x]
[Method 2 Might Not Always Detect All Speeds]
----------------------------------------------------------------------------
[ DVD Identifier V5.0.1 - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------


DVD+R DL MediaRange


----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R-DL:RICOHJPN-D01-067]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R DL] - [DVD+R DL]
Manufacturer Name : [Ricoh Co. Ltd.]
Manufacturer ID : [RICOHJPN]
Media Type ID : [D01]
Product Revision : [067]
Blank Disc Capacity : [Not Supported By Method 2]
Recording Speeds : [2.4x , 3.3x-8x]
[Method 2 Might Not Always Detect All Speeds]
----------------------------------------------------------------------------
[ DVD Identifier V5.0.1 - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------

[Stef]

Bonjour et bienvenue sur GN

Peux tu nous poster le fichier log de Nero STP.

[Smacks]

Tetard

1K22-0867-0795-66M4-5462-7567-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0

Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 3 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST CD-RW GCE-8160B >Version: 2.08 - HA 1 TA 1 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 5T040H4 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8160B E: CdRom1
HL-DT-ST DVDRAM GSA-4163B F: CdRom3
Generic DVD-ROM G: CdRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 767MB (785420kB)
Free physical memory: 354MB (362928kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.4.2008
Compilation UDF/ISO
14:39:55 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:40:16 #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started

14:40:16 #3 Phase 114 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed (no file modified)

14:40:16 #4 Text 0 File Isodoc.cpp, Line 6668
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:40:16 #5 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted

14:40:16 #6 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)

14:40:16 #7 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)

14:40:16 #8 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

14:40:17 #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3758975 (835:19.50, 7341MB)

14:40:17 #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

14:40:18 #11 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66
Disc Application Code: 0, Extended Information Indicators: 3

14:40:18 #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:40:18 #13 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3758976 (3758976) = #3758976/835:19.51
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3758976 blocks [F: HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

14:40:18 #14 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [F: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7698382848, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3758976 | 0 | 0x00
3758976 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

14:40:18 #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

14:40:18 #16 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

14:40:18 #17 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

14:40:18 #18 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.

14:40:18 #19 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

14:40:18 #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 2.4x (3 324 Ko/s)

14:40:18 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:40:29 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 35 2D 00 0E 0C
Buffer x07f7fbc0: Len xc
0x00 0A 00 00 00 00 00 00 00 1C AE 30

14:40:29 #23 Text 0 File DVDPlusDualLayer.cpp, Line 671
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)

14:40:29 #24 CDR -1135 File ThreadedTransferInterface.cpp, Line 1754
Write error
F: HL-DT-ST DVDRAM GSA-4163B

14:40:29 #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1754
Could not perform start of Disc-at-once

14:40:29 #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

14:40:29 #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 2.4x (3 324 Ko/s)

14:40:29 #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:40:33 #29 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

14:40:33 #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)