[LG GSA-4163B] Problème de gravure (illegal disc)

Problèmes de fonctionnement, tests, conseils d'achat... Posez votre question ici (Nec, Sony, Teac, Traxdata...).

[LG GSA-4163B] Problème de gravure (illegal disc)

Messagepar samizdat » 16 Aoû 2005 22:33

Bonjour,

'ai ce Graveur GSA-4163B OEM de chez LG.

J'ai essayé de graveur un DVD créé sous Première puis Encore DVD.
Ca a buggé au moment de l'écriture sous Encore...il m'a éjecté le DVD vierge.
J'ai donc décidé de créer une image ISO sous Encore pour la graver avec mon logiciel de gravure CDBurnerXP.

Je fais "graver une image ISO"...il lance la procédure...et là encore, message d'erreur et éjection du disque !

J'ai ensuite essayé de graver avec un 3e DVD vierge les fichiers (en me disant que ce serait pas lisible sur un lecteur DVD)...et là encore, problème :

Il commence par "formaté" le DVD (alors qu'il est vierge)
Commence à graver...et au bout de quelques minutes j'ai le message " Burn Processus failed"

Il y a également marqué dans la barre des évenements "Illegal disc"

Le plus bizarre : les 3 DVD-RW que j'ai utilisé n'arrivent plus à être lu par mon lecteur. Lorsque je les met dedans, il lit...et bug...impossible de vérifier si il y a des données dessus...ni même d'éffacer toutes les données.

J'ai pourtant la derniere version du drivers pour ce graveur.

Voici le log de Néro pour info :

Sami

serial supprimé par PIER

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6B120P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 691MB (708560kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.8.2005
ISO compilation
20:22:56 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:22:56 #2 Text 0 File Reader.cpp, Line 127
Reader running

20:22:56 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running

20:22:56 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

20:22:56 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

20:23:57 #6 SCSI -1033 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x00 0x04 0x01

20:24:30 #7 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 815 ( 0:10.65, 1MB)

20:24:30 #8 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

20:24:30 #9 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+RW
Disc Manufacturer ID: MCC, Media Type ID: A01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

20:24:30 #10 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD+R DL.)

20:24:30 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 816 (816) = #816/0:10.66
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 816 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

20:24:30 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1671168, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
816 | lead-out | 1 | 0x41 | 0x00

20:24:30 #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

20:24:30 #14 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

20:24:30 #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

20:24:30 #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3 324 KB/s)

20:24:30 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:24:30 #18 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MCC.....
Media type ID: A01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 4D 43 43 00 00 - 00 00 00 41 30 31 00 39 ...MCC.....A01.9
23 02 84 78 68 02 1D 02 - 92 78 68 02 1B 02 8A 78 #..xh....xh....x
68 02 1C 22 13 00 E0 10 - 00 00 00 00 00 00 00 00 h.."............

20:24:30 #19 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

20:24:30 #20 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning

20:26:36 #21 Phase 100 File dlgbrnst.cpp, Line 1832
Formatting disc was successful

20:28:33 #22 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 0
DVD high compatibility mode: Yes

20:28:33 #23 SCSI -1046 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x05670000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x2A 0x00 0x00 0x0F 0x30 0x05

20:28:33 #24 CDR -1046 File Writer.cpp, Line 311
Illegal disc

20:28:34 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:30:28 #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3 324 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 00:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sami

Serial supprimé par PIER

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6B120P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 611MB (626676kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.8.2005
ISO compilation
21:03:42 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

21:03:42 #2 Text 0 File Reader.cpp, Line 127
Reader running

21:03:42 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running

21:03:42 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

21:03:42 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

21:03:42 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1725759 (383:30.09, 3370MB)

21:03:42 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

21:03:42 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+RW
Disc Manufacturer ID: MCC, Media Type ID: A01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

21:03:42 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:03:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1725760 (1725760) = #1725760/383:30.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1725760 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

21:03:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3534356480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1725760 | lead-out | 1 | 0x41 | 0x00

21:03:42 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

21:03:43 #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

21:03:43 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

21:03:43 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3 324 KB/s)

21:03:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:03:43 #17 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MCC.....
Media type ID: A01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 4D 43 43 00 00 - 00 00 00 41 30 31 00 39 ...MCC.....A01.9
23 02 84 78 68 02 1D 02 - 92 78 68 02 1B 02 8A 78 #..xh....xh....x
68 02 1C 22 13 00 E0 10 - 00 00 00 00 00 00 00 00 h.."............

21:03:43 #18 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

21:03:43 #19 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning

21:05:52 #20 Phase 100 File dlgbrnst.cpp, Line 1832
Formatting disc was successful

21:07:51 #21 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 0
DVD high compatibility mode: Yes

21:07:56 #22 SCSI -1046 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03270000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x2A 0x00 0x00 0x0F 0x30 0x05

21:07:56 #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc

21:07:56 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:07:56 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

21:09:48 #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3 324 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 00:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sami

IDEM

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.8
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6B120P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 606MB (620668kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.8.2005
Burn DVD Image
01:34:05 #1 Text 0 File Reader.cpp, Line 127
Reader running

01:34:05 #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running

01:34:05 #3 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

01:34:05 #4 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1725951 (383:32.51, 3370MB)

01:34:05 #5 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

01:34:05 #6 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+RW
Disc Manufacturer ID: MCC, Media Type ID: A01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

01:34:05 #7 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

01:34:05 #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1725952 (1725952) = #1725952/383:32.52
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1725952 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

01:34:05 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3534749696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1725952 | lead-out | 1 | 0x41 | 0x00

01:34:05 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

01:34:05 #11 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

01:34:05 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

01:34:05 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3 324 KB/s)

01:34:05 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

01:34:05 #15 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MCC.....
Media type ID: A01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 4D 43 43 00 00 - 00 00 00 41 30 31 00 39 ...MCC.....A01.9
23 02 84 78 68 02 1D 02 - 92 78 68 02 1B 02 8A 78 #..xh....xh....x
68 02 1C 22 13 00 E0 10 - 00 00 00 00 00 00 00 00 h.."............

01:34:05 #16 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

01:34:05 #17 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning

01:36:00 #18 Phase 100 File dlgbrnst.cpp, Line 1832
Formatting disc was successful

01:37:46 #19 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 0
DVD high compatibility mode: Yes

01:37:52 #20 SCSI -1046 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03C10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x2A 0x00 0x00 0x0F 0x30 0x05

01:37:52 #21 CDR -1046 File Writer.cpp, Line 311
Illegal disc

01:37:52 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

01:37:53 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

01:39:33 #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3 324 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 00:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sami

IDEM

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6B120P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 657MB (672972kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.8.2005
Video CD
00:55:52 #1 Text 0 File VCDDoc.cpp, Line 1371
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

00:55:52 #2 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

00:55:52 #3 Text 0 File VCDDoc.cpp, Line 2846
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: PAL
-----------------------------------------------------

00:55:52 #4 Text 0 File Burncd.cpp, Line 2868
HL-DT-ST DVDRAM GSA-4163B
Buffer underrun protection activated

00:55:52 #5 Text 0 File Reader.cpp, Line 127
Reader running

00:55:52 #6 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running

00:55:52 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

00:55:52 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

00:55:52 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media

00:55:52 #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 248518 ( 55:15.43)

00:55:52 #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

00:55:52 #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

00:55:52 #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

00:55:52 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1310 (1310) = #1310/0:17.35
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1310 blocks [HL-DT-ST DVDRAM GSA-4163B]
1: TRM_DATA_MODE2_2336 (tunisie_vcd_pal)
2 indices, index0 (150) not provided
original disc pos #0 + 247059 (247059) = #247059/54:54.9
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 247059 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

00:55:52 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 3433920, ISRC ""
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 3433920 3786720 584869488, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1310 | 2 | 0 | 0x41 | 0x00
1460 | 2 | 1 | 0x41 | 0x00
248519 | lead-out | 1 | 0x41 | 0x00

00:55:52 #16 Phase 73 File dlgbrnst.cpp, Line 1832
Preparing items

00:55:54 #17 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

00:55:54 #18 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

00:55:54 #19 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

00:55:54 #20 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3 600 KB/s)

00:55:54 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

00:55:54 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1460

00:55:54 #23 Text 0 File Mmc.cpp, Line 16480
StartDAO : CD-Text - Off

00:55:54 #24 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON

00:55:54 #25 Text 0 File Mmc.cpp, Line 16767
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 13 23
41 02 01 21 00 00 15 23
41 aa 01 34 00 37 0f 2c

00:56:04 #26 Text 0 File Cdrdrv.cpp, Line 1287
00:56:04.528 - HL-DT-ST DVDRAM GSA-4163B\H0 T1 : Queue again later

00:59:25 #27 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 248519 (3CAC7h), lenght 0 blocks

00:59:25 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

00:59:31 #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 24x (3 600 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 00:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sami

IDEM

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6B120P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 616MB (630844kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.8.2005
===== Disc-Copy over image - 1st step : Copy to image ...

18:19:15 #1 Text 0 File Reader.cpp, Line 127
Reader running

18:19:15 #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

18:19:15 #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2286112 (gap 0) Blank 0 Res 1 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

18:19:15 #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2286112 = 2286112, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

18:19:15 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

18:19:15 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

18:19:15 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

18:19:15 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

18:19:15 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:19:15 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [Image Recorder]
--------------------------------------------------------------

18:19:15 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

18:19:15 #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

18:19:15 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:27:00 #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

18:27:00 #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:27:00 #16 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully



===== Disc-Copy over image - 2nd step : Burn the image ...

18:27:07 #1 Text 0 File Reader.cpp, Line 127
Reader running

18:27:07 #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running

18:27:07 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4681957376
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=508:01.37 ( 2286112) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Propriétaire\Mes documents\TempImage.nrg>

18:27:07 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

18:42:21 #5 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

18:42:21 #6 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

18:42:21 #7 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+RW
Disc Manufacturer ID: MCC, Media Type ID: A01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

18:42:21 #8 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD+R DL.)

18:42:21 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

18:42:21 #10 Text 0 File Burncd.cpp, Line 3747
Can only write at 2.4x (3 324 KB/s) instead of 4x (5 540 KB/s) to current disc.

18:42:21 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

18:42:21 #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3 324 KB/s)

18:42:21 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:42:21 #14 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MCC.....
Media type ID: A01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 4D 43 43 00 00 - 00 00 00 41 30 31 00 39 ...MCC.....A01.9
23 02 84 78 68 02 1D 02 - 92 78 68 02 1B 02 8A 78 #..xh....xh....x
68 02 1C 22 13 00 E0 10 - 00 00 00 00 00 00 00 00 h.."............

18:42:21 #15 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

18:42:21 #16 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning

18:44:25 #17 Phase 100 File dlgbrnst.cpp, Line 1832
Formatting disc was successful

18:46:22 #18 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 0
DVD high compatibility mode: Yes

18:46:26 #19 SCSI -1046 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04F90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x2A 0x00 0x00 0x0F 0x30 0x05

18:46:26 #20 CDR -1046 File Writer.cpp, Line 311
Illegal disc

18:46:26 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:46:26 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

18:48:17 #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3 324 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 00:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======


Je ne sais vraiment plus quoi faire...
Mais mon graveur est neuf...et j'ai le firmware A105
j'ai essayé avec un autre logiciel de gravure...c'est pareil !
J'ai juste gravé une vingtaine de CD de la même marque (Verbatim) sans aucun soucis !

Merci d'avance pour votre aide !
samizdat
Nouveau Membre
 
Messages: 20
Enregistré le: 16 Aoû 2005

Messagepar PIER » 16 Aoû 2005 22:37

Bonjour et bienvenue sur le forum de Gravure-News

Attention au numéro de série dans le log de Nero !

Je n'ai pas bien compris, tu essais de graver chaque fois à partir du même original ?
Dans ce cas là un original foireux pourrait-être une des causes probables.
Abréviations et style SMS sont à proscrire, merci de faire des phrases !
Aucun support par Mail / MP

ImageRechercher avant de poser une question !
Avatar de l’utilisateur
PIER
Fondateur
Administrateur
 
Messages: 13421
Enregistré le: 31 Juil 2002

Messagepar samizdat » 16 Aoû 2005 22:42

Non, j'ai essayé plusieurs trucs :

- Graver à partir d'un DVD "normal"
- Graver à partir de fichier présents sur mon pc : avec Encore, avec Néro et avec CD Burner XP

Et à chaque fois, ca couille...
J'ai essayé avec 3 DVD RW vierges différents...et à chaque fois, non seulement ca marche pas...mais les DVD semblent inutilisable après !
samizdat
Nouveau Membre
 
Messages: 20
Enregistré le: 16 Aoû 2005

Messagepar PIER » 16 Aoû 2005 22:53

Dans le premier log je vois ça :

Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD+R DL


Je ne comprends rien à ces logs il y a des gravures de DVD, CD... :?

Il faudrait peut-être faire une mise à jour de Nero.

Comment procédes-tu lors de la gravure du DVD.
Abréviations et style SMS sont à proscrire, merci de faire des phrases !
Aucun support par Mail / MP

ImageRechercher avant de poser une question !
Avatar de l’utilisateur
PIER
Fondateur
Administrateur
 
Messages: 13421
Enregistré le: 31 Juil 2002

Messagepar samizdat » 16 Aoû 2005 22:59

Bah avec néro...je lance "Néro Sart Mart"...je fais copier DVD...il lance nero express...et puis je cliques sur suivant....

Mais je pense pas que ça vienne de Néro puisque j'ai essayé avec d'autres logiciels...et que ça merde également !
samizdat
Nouveau Membre
 
Messages: 20
Enregistré le: 16 Aoû 2005

Messagepar PIER » 16 Aoû 2005 23:08

Dans ce cas là parle nous de ta config...
Abréviations et style SMS sont à proscrire, merci de faire des phrases !
Aucun support par Mail / MP

ImageRechercher avant de poser une question !
Avatar de l’utilisateur
PIER
Fondateur
Administrateur
 
Messages: 13421
Enregistré le: 31 Juil 2002

Messagepar samizdat » 16 Aoû 2005 23:17

Athlon XP 2800+
Mobo Asrock K7VT4+ Pro
1Go de Ram (x2 Samsung PC3200 512Mo DDR)
Disque dur Maxtor 120 Go 7200 RPM UDMA133 8Mo (DiamondMax plus 9)
Graveur DVD LG GSA-4163B OEM
Asus Radeon 9250 GE/TD 256Mo
samizdat
Nouveau Membre
 
Messages: 20
Enregistré le: 16 Aoû 2005

Messagepar PIER » 16 Aoû 2005 23:35

Ma boule de crystal n'arrive pas à m'indiquer les branchements... :wink:
Abréviations et style SMS sont à proscrire, merci de faire des phrases !
Aucun support par Mail / MP

ImageRechercher avant de poser une question !
Avatar de l’utilisateur
PIER
Fondateur
Administrateur
 
Messages: 13421
Enregistré le: 31 Juil 2002

Messagepar samizdat » 16 Aoû 2005 23:53

Mon canal IDE Principal :

Périphérique 0 :
- Mode de transfert : DMA si dispo
- Mode de transfert actif : Mode PIO

Périphérique 1 :
- Mode de transfert : DMA si dispo
- Mode de transfert actif : Ultra DMA Mode 2

Mon canal IDE Secondaire :

Périphérique 0 :
- Mode de transfert : DMA si dispo
- Mode de transfert actif : Non applicable

Périphérique 1 :
- Mode de transfert : DMA si dispo
- Mode de transfert actif : Non applicable
samizdat
Nouveau Membre
 
Messages: 20
Enregistré le: 16 Aoû 2005

Messagepar AirBAT » 17 Aoû 2005 0:19

samizdat a écrit:Mon canal IDE Principal :

Périphérique 0 :
- Mode de transfert : DMA si dispo
- Mode de transfert actif : Mode PIO <= PROBLEME

Périphérique 1 :
- Mode de transfert : DMA si dispo
- Mode de transfert actif : Ultra DMA Mode 2 <= PROBLEME

Tu as un probleme au niveau des modes de transfert. En effet, ton disque dur doit etre en mode DMA5 et ton graveur en mode DMA2.
Pour corriger le probleme , il faut reinstaller les controleurs IDE. Pour se faire , suis ce tuto : Tutoriel Activation mode DMA. Mets aussi ton graveur sur une nappe et ton disque dur sur l autre.
Refais tes tests apres ca car tu as peut etre des erreurs de transfert ...
@ PLUCH ;)


Bi-Xeon 2.8 GHz , 2x 1024 Mo DDR ECC, GeForce 6800GT, Kyrio 4000xt, 3 ecrans TFT 17", logitech diNovo 2.0, 450 Go en SCSI U320 10ktr/min + 160Go ATA100, PX-716A et Premium, connexion 8Mb/s et 4Mb/s.
Avatar de l’utilisateur
AirBAT
Membre dynamique
Membre dynamique
 
Messages: 416
Enregistré le: 02 Sep 2003
Localisation: Derriere toi ou alors demande a ta femme

Messagepar samizdat » 17 Aoû 2005 10:25

Voilà, j'ai fait le changement...je suis maintenant en ULtra DMA pour les deux...mais ça ne change rien :

Mon canal IDE Principal :

Périphérique 0 :
- Mode de transfert : DMA si dispo
- Mode de transfert actif : Ultra DMA Mode 2

Périphérique 1 :
- Mode de transfert : DMA si dispo
- Mode de transfert actif : Ultra DMA Mode 2

Mon canal IDE Secondaire :

Périphérique 0 :
- Mode de transfert : DMA si dispo
- Mode de transfert actif : Non applicable

Périphérique 1 :
- Mode de transfert : DMA si dispo
- Mode de transfert actif : Non applicable

Je n'ai pas pu mettre le graveur sur la deuxième nappe car je n'ai pas le cable (la nappe) nécessaire....
samizdat
Nouveau Membre
 
Messages: 20
Enregistré le: 16 Aoû 2005

Messagepar AirBAT » 17 Aoû 2005 12:30

samizdat a écrit: ... 21:07:56 #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc ...

Ce qui signifie qu il y a un probleme d ecriture sur ton DVD vierge ...
Tu as toujours un probleme sur ton disque dur, comme je te l ai dis dansmon post precedent, ton disque dur doit etre en mode DMA5 et non pas DMA2.
Change ta nappe IDE car elle doit etre foireuse, verifies les connexions entre le cable IDE, la carte mere, le disque dur et le graveur.
Achetes deux nappe IDE (une pour le graveur, lautre pour le disque dur) ca ne coute pas grand chose et ca pourrait regler ton probleme ...
@ PLUCH ;)


Bi-Xeon 2.8 GHz , 2x 1024 Mo DDR ECC, GeForce 6800GT, Kyrio 4000xt, 3 ecrans TFT 17", logitech diNovo 2.0, 450 Go en SCSI U320 10ktr/min + 160Go ATA100, PX-716A et Premium, connexion 8Mb/s et 4Mb/s.
Avatar de l’utilisateur
AirBAT
Membre dynamique
Membre dynamique
 
Messages: 416
Enregistré le: 02 Sep 2003
Localisation: Derriere toi ou alors demande a ta femme

Messagepar samizdat » 17 Aoû 2005 13:10

Ce n'est pas envisageable que le problème vienne de mes DVD RW (Verbatim acheté chez Progestion) ?
samizdat
Nouveau Membre
 
Messages: 20
Enregistré le: 16 Aoû 2005

Messagepar PIER » 17 Aoû 2005 13:22

On te donne une méthode pour détecter ton soucis et améliorer tes performances, libre à toi de la suivre...
Abréviations et style SMS sont à proscrire, merci de faire des phrases !
Aucun support par Mail / MP

ImageRechercher avant de poser une question !
Avatar de l’utilisateur
PIER
Fondateur
Administrateur
 
Messages: 13421
Enregistré le: 31 Juil 2002

Messagepar samizdat » 17 Aoû 2005 13:28

PIER a écrit:On te donne une méthode pour détecter ton soucis et améliorer tes performances, libre à toi de la suivre...

Je sais bien...mais je pourrais pas aller acheter tout ça avant la semaine prochaine. donc je me demandais simplement si le problème ne pouvait pas venir d'autre part.

D'autant que ma config est totalement neuve (y compris la nappe).
samizdat
Nouveau Membre
 
Messages: 20
Enregistré le: 16 Aoû 2005

Messagepar AirBAT » 17 Aoû 2005 21:41

Fais comme je t ai dis plus haut, je ne vois pas d autre solution pour le moment ...
@ PLUCH ;)


Bi-Xeon 2.8 GHz , 2x 1024 Mo DDR ECC, GeForce 6800GT, Kyrio 4000xt, 3 ecrans TFT 17", logitech diNovo 2.0, 450 Go en SCSI U320 10ktr/min + 160Go ATA100, PX-716A et Premium, connexion 8Mb/s et 4Mb/s.
Avatar de l’utilisateur
AirBAT
Membre dynamique
Membre dynamique
 
Messages: 416
Enregistré le: 02 Sep 2003
Localisation: Derriere toi ou alors demande a ta femme

Messagepar samizdat » 18 Aoû 2005 1:23

AirBAT a écrit:Fais comme je t ai dis plus haut, je ne vois pas d autre solution pour le moment ...

Ok, bah j'irai la semaine prochaine acheté les deux nappes...
Je vous tiens au courant !
Merci pour l'aide
samizdat
Nouveau Membre
 
Messages: 20
Enregistré le: 16 Aoû 2005

Messagepar samizdat » 28 Aoû 2005 12:37

Bon...
Avant d'acheter des nappes...
J'ai acheté des DVD-R Philips car il y avait une promo à Carrefour...

J'ai tenté de graver...directement avec Encore DVD....et ça marche nickel !

J'ai de plus en plus de doute sur la qualité et l'originalité des DVD-RW Verbatim que j'ai acheté chez Pro Gestion à Paris.

Comment puis-je vérifier qu'ils ne sont pas endommagés....et éventuellement me faire rembourser svp ?

Merci
samizdat
Nouveau Membre
 
Messages: 20
Enregistré le: 16 Aoû 2005



  • Publicité

Retourner vers Les graveurs CD / DVD et Blu-ray

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 0 invités