Je viens vers vous car j'ai un problème de graveur. J'ai tenté de graver des dvd-r hier avec Nero, 4 tentatives=4 échecs. Comme je ne compte pas me ruiner en dvds, je vous demande votre aide. Voilà, mon graveur est un LG 4167B, le problème c'est qu'il ne reconnaît plus les dvd-r ni les dvd+rw ce qui commence à être ennuyeux. A noter qu'au bout de 2 gravures avec échec je suis passé à la version 13 du firmwire du graveur (version 12 avant). Après avoir eu un échec avec Nero 8, je suis revenu à la version 7.
A noter que les dvd+r sont reconnus mais qu'à chaque fois la gravure plante. J'ai la bestiole depuis 2 ans et 3 mois environ.
Je me pose donc la question suivante : mon graveur est-il HS ? Il lit apparemment encore les cds enregistrés.
Ensuite si le graveur est mort ? Lequel me conseillez-vous ?
Je vous joins le rapport d'erreur enregistré
FF
1C83-0010-1006-8732-0470-8196-6395
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2500JS-00MHB0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 2 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 2 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B D: CDRom0
HL-DT-ST CD-RW GCE-8483B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1534MB (1571836kB)
Free physical memory: 824MB (843824kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.4.2008
Compilation ISO
00:53:36 #1 Text 0 File Isodoc.cpp, Line 6423
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
00:53:36 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
00:53:36 #3 Text 0 File Reader.cpp, Line 124
Reader running
00:53:36 #4 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVDRAM GSA-4167B running
00:53:36 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
00:53:36 #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
00:53:36 #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2148927 (477:32.27, 4197MB)
00:53:36 #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
00:53:36 #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
00:53:36 #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
00:53:36 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2148928 (2148928) = #2148928/477:32.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2148928 blocks [D: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------
00:53:36 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4401004544, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2148928 | lead-out | 1 | 0x41 | 0x00
00:53:36 #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
00:53:36 #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
00:53:37 #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
00:53:37 #16 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
00:53:37 #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
00:53:37 #18 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started
00:53:37 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:55:16 #20 Text 0 File WriterStatus.cpp, Line 116
<D: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 2148928 (20CA40h), length 0 blocks
00:55:16 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
00:55:16 #22 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 32x (44 164 Ko/s)
00:55:16 #23 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5 540 Ko/s)
00:55:16 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:55:16 #25 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.’_......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
00:55:16 #26 Text 0 File DVDR.cpp, Line 5719
Drive: HL-DT-ST DVDRAM GSA-4167B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
00:55:16 #27 CDR -1207 File DVDR.cpp, Line 5649
Book Type automatically set to: DVD-ROM
00:55:16 #28 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
01:08:48 #29 Text 0 File WriterStatus.cpp, Line 116
<D: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 2148928 (20CA40h), length 0 blocks
01:08:48 #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
01:08:53 #31 SPTI -1194 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 03 0E 73 04
01:08:55 #32 CDR -1194 File ThreadedTransferInterface.cpp, Line 1937
PMA update failure
D: HL-DT-ST DVDRAM GSA-4167B
01:08:55 #33 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once
01:08:59 #34 SPTI -1194 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 03 0E 73 04
01:08:59 #35 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
01:09:01 #36 CDR -1194 File WriterStatus.cpp, Line 167
PMA update failure
D: HL-DT-ST DVDRAM GSA-4167B
01:09:01 #37 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
01:09:01 #38 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5 540 Ko/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 23:07:32
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 27/03/2007 09:55:32
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 27/07/2007 01:06:18 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Flux RSS