Gravure-News

[jack-hunter]

Bonsoir sur Gravure -News

j'ai besoin d'aide pour un probleme avec le graveur de dvd lg 4167b.en fait tout se passe bien pour graver des cd-r et des cd-rw avec nero .mais j'ai eu une erreur du type(adresse de bloc invalide) en gravant un dvd-r verbatim,j'ai aussi essayé avec un dvd+r philips mais j'ai toujours la meme erreur avec nero 7.je veux comment faire pour resoudre ce probleme ??merci

[Stef]

Bonjour et bienvenue sur GN
Quelle version de Nero 7 utilises-tu
La version 7.0.5.4 est disponible en téléchargement :
http://www.gravure-news.com/download/201.php

[jack-hunter]

merci mais j'ai déjà cette version de nero .mon probleme soit ça doit etre un probleme de compatibilité des dvd ou soit de mon graveur .

[Scaramanga]

As tu le dernier firmware pour ton graveur ?
Peux tu nous coller le fichier Log de Nero ?

Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.

En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:Program fileAheadNero, il se nomne NeroHistoryLog . On peut le visualier avec un éditeur de texte , bloc note de windows par exemple.

Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log.
tu peux le coller entre les balise [ code ] et [ /code ].

[jack-hunter]

excuse moi le fichier log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4

Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380022A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : BTC BCE4816IM atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B D: CDRom0
BTC BCE4816IM E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 85MB (87248kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.2.2006
Compilation ISO
11:29:58 #1 Text 0 File Isodoc.cpp, Line 6414
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:29:59 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

11:29:59 #3 Text 0 File Reader.cpp, Line 124
Reader running

11:29:59 #4 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVDRAM GSA-4167B running

11:29:59 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:29:59 #6 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media

11:29:59 #7 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 78079 ( 17:21.04, 152MB)

11:29:59 #8 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)

11:29:59 #9 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

11:29:59 #10 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:29:59 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 78080 (78080) = #78080/17:21.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 78080 blocks [D: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

11:29:59 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 159907840, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
78080 | lead-out | 1 | 0x41 | 0x00

11:29:59 #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:29:59 #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:29:59 #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

11:29:59 #16 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.

11:29:59 #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

11:29:59 #18 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started

11:29:59 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:30:08 #20 Text 0 File WriterStatus.cpp, Line 116
<D: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 78080 (13100h), length 0 blocks

11:30:08 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:30:08 #22 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 120,7x (166 658 Ko/s)

11:30:08 #23 Phase 32 File dlgbrnst.cpp, Line 1730
Simulation started at 16x (22 160 Ko/s)

11:30:08 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:30:08 #25 Text 0 File DVDR.cpp, Line 2699
Recording mode: Sequential Recording Mode for Multisession

11:30:08 #26 Text 0 File DVDR.cpp, Line 2855
Start write address at LBA 0
DVD high compatibility mode: Yes

11:30:09 #27 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:30:33 #28 Text 0 File WriterStatus.cpp, Line 116
<D: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 78080 (13100h), length 0 blocks

11:30:34 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:30:34 #30 Text 0 File DVDR.cpp, Line 3095
EndDAO: Last written address was 78079

11:30:36 #31 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

11:30:40 #32 Phase 33 File dlgbrnst.cpp, Line 1730
Simulation completed successfully at 16x (22 160 Ko/s)

11:30:41 #33 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 16x (22 160 Ko/s)

11:30:41 #34 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:30:41 #35 Text 0 File DVDR.cpp, Line 2699
Recording mode: Sequential Recording Mode for Multisession

11:30:41 #36 Text 0 File DVDR.cpp, Line 2855
Start write address at LBA 0
DVD high compatibility mode: Yes

11:30:41 #37 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:32:34 #38 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x034ce400: Len xc

11:32:34 #39 SPTI -1064 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 2A 00 00 0C 21 02
Buffer x05700000: Len x10000
0x18 20 4C 6A E8 B2 64 03 04 09 4D 41 14 2C 80 60
0x81 25 9E E2 81 90 0C 10 23 39 4F E3 99 BE 45 6F
0x55 AE 75 E8 23 36 2F 36 C3 9F 83 46 24 72 A6 45

11:32:34 #40 CDR -1064 File Writer.cpp, Line 302
Invalid block address
D: HL-DT-ST DVDRAM GSA-4167B

11:32:34 #41 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:32:34 #42 Text 0 File DVDR.cpp, Line 3095
EndDAO: Last written address was 31

11:32:36 #43 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

11:32:36 #44 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 16x (22 160 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 00:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Scaramanga]

Code: Tout sélectionner

 Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00

On extrait le code d'erreur ATAPi : 030c00, soit une erreur d'ecriture.
Voir cette page décrivant les codes d'erreurs, et les remédes.
Si ton firmware est le dernier...je ne vois qu'un solution : utiliser un autre média.

[jack-hunter]

merci pour le renseignement

[Scaramanga]

Tu es le bienvenue, et teins nous au Jus !

[jack-hunter]

au fait j'ai résussi à graver un dvd+r de la marque TDK mais c'est étrange que ça veut pas graver un dvd-r verbatim et un dvd+r philips

[Scaramanga]

C'est ce fichu problème de compatibilité Média/Graveur...
Perso, mes LiteOn n'ont jamais rien recraché....

[jack-hunter]

à ton avis je devrai prendre comme marque de media pour les dvd.et je veux si je devrai changer de graveur .merci