Gravure-News

[ranma3/4]

bonjour a tous, voila depuis ce matin impossible de graver avec nero ou autre logiciel, j'ai bien fais des recherche au niveau des drivers, essayé plusieurs marques de dvd mais toujours rien a faire.
J'en viens donc a solliciter un peu d'aide car la je suis totalement dépassé.

je vous met le rapport de nero, la gravure se lance puis s'arrête
le dvd est toujours vierge apres.

Windows XP 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-T40N>Version: JT03 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-T40N >Version: JT03 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off
DiskPeripheral : Hitachi HTS542512K9SA00 iaStor Port 1 ID 0 DMA: On
CdRomPeripheral : UE2210G PUH001X 2.0B abdt1uyu Port 5 ID 0 DMA: Off
CdRomPeripheral : NE3582V RGU221H 1.01 aseb7ma0 Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-T40N F: CdRom0
SCSI DVD-ROM G: CdRom1
NE3582V RGU221H D: CdRom2
UE2210G PUH001X J: CdRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2037MB (2086112kB)
Free physical memory: 876MB (897228kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.11.2009
Compilation ISO
08:58:05 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

08:58:05 #2 Text 0 File Isodoc.cpp, Line 6668
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

08:58:05 #3 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)

08:58:06 #4 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

08:58:06 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2225855 (494:38.05, 4347MB)

08:58:06 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

08:58:06 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-T40N, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

08:58:06 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

08:58:06 #9 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2225856 (2225856) = #2225856/494:38.6
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2225856 blocks [F: HL-DT-ST DVDRAM GSA-T40N]
--------------------------------------------------------------

08:58:06 #10 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [F: HL-DT-ST DVDRAM GSA-T40N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4558553088, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2225856 | 0 | 0x00
2225856 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

08:58:06 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

08:58:06 #12 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

08:58:06 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

08:58:06 #14 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.

08:58:06 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

08:58:06 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11 080 Ko/s)

08:58:06 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

08:58:06 #18 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode

08:58:06 #19 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: Yes

08:58:06 #20 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

08:58:06 #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

08:58:21 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 32 4D 03 0C 0C
Buffer x190b0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

08:58:21 #23 CDR -1135 File Writer.cpp, Line 312
Write error
F: HL-DT-ST DVDRAM GSA-T40N

08:58:21 #24 Text 0 File DVDR.cpp, Line 3785
EndDAO: Last written address was -1 (FFFFFFFFh)

08:58:21 #25 CDR -1135 File WriterStatus.cpp, Line 162
Write error
F: HL-DT-ST DVDRAM GSA-T40N

08:58:21 #26 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

08:58:22 #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11 080 Ko/s)

08:58:22 #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

08:58:24 #29 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

08:58:24 #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon


j'ai fait des recherches sur la clée de registre mais pas trouvée...
Si quelqu'un peut m'aider je lui en serait tres reconnaissant, merci

[popzz]

Bonsoir
Ah ces lecteurs virtuels qui nous enquiquinent...
Il y en a que 3!? LOL
A désinstaller et réessayer
A+

[fbicia]

et reactiver le dma

[franz99]

. . .

08:58:21 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 32 4D 03 0C 0C
Buffer x190b0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

08:58:21 #23 CDR -1135 File Writer.cpp, Line 312
Write error
F: HL-DT-ST DVDRAM GSA-T40N

. . .

Je m’interroge vraiment: un lecteur virtuel ou bien une DMA non activée peut-elle provoquer une erreur de ce type ?
Pour ma part je pense que la solution au problème serait plutôt à rechercher de ce côté:
http://forum.gravure-news.com/sujets-bl ... m?start=19
Mais bon, ranma a sans doute disparu de GN plus qu’aux ¾ …

[Scaramanga]

Mettre à jour le firmware.

[franz99]

On peut toujours écrire ceci … même quand une telle mise à jour n’existe pas !

En effet depuis j'ai beaucoup cherché, notamment en suivant cette judicieuse conclusion:
http://forum.gravure-news.com/sujets-bl ... m?start=19

Mais une mise à jour pour le firmware JT03 que ranma a dans son graveur LG GSA-T40N est tout simplement introuvable !
- que ce soit sur site un LG officiel:
http://www.lge.com/us/support/product/s ... roduct.jsp
http://www.lge.com/fr/support/product/s ... roduct.jsp
- ou bien ailleurs sur les sites spécialisés en firmware …